[PATCH 08/14] mmc: jz4740: Set clock rate to mmc->f_max rather than JZ_MMC_CLK_RATE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Alex Smith <alex.smith@xxxxxxxxxx>

The maximum clock rate can be overridden by DT. The clock rate should
be set to the DT-specified value rather than the constant JZ_MMC_CLK_RATE
when this is done. If the maximum clock rate is not set by DT then
mmc->f_max will be set to JZ_MMC_CLK_RATE.

Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx>
Signed-off-by: Alex Smith <alex.smith@xxxxxxxxxx>
---
 drivers/mmc/host/jz4740_mmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 03757cc55f52..aa635b458d2c 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -825,7 +825,7 @@ static int jz4740_mmc_set_clock_rate(struct jz4740_mmc_host *host, int rate)
 	int real_rate;
 
 	jz4740_mmc_clock_disable(host);
-	clk_set_rate(host->clk, JZ_MMC_CLK_RATE);
+	clk_set_rate(host->clk, host->mmc->f_max);
 
 	real_rate = clk_get_rate(host->clk);
 
-- 
2.16.2



[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux