From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Currently, if jz4740_mmc_request_gpios() fails, the driver
tries to release DMA resources. This is wrong because DMA
is requested at a later stage.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
[Ezequiel: cleanup commit message]
Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/jz4740_mmc.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 5a85a3017711..636741ac9031 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -1006,7 +1006,7 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
ret = jz4740_mmc_request_gpios(mmc, pdev);
if (ret)
- goto err_release_dma;
+ goto err_free_host;
mmc->ops = &jz4740_mmc_ops;
mmc->f_min = JZ_MMC_CLK_RATE / 128;
@@ -1038,16 +1038,17 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
jz4740_mmc_clock_disable(host);
timer_setup(&host->timeout_timer, jz4740_mmc_timeout, 0);
- host->use_dma = true;
- if (host->use_dma && jz4740_mmc_acquire_dma_channels(host) != 0)
- host->use_dma = false;
+ ret = jz4740_mmc_acquire_dma_channels(host);
+ if (ret == -EPROBE_DEFER)
+ goto err_free_irq;
+ host->use_dma = !ret;
platform_set_drvdata(pdev, host);
ret = mmc_add_host(mmc);
if (ret) {
dev_err(&pdev->dev, "Failed to add mmc host: %d\n", ret);
- goto err_free_irq;
+ goto err_release_dma;
}
dev_info(&pdev->dev, "JZ SD/MMC card driver registered\n");
@@ -1057,13 +1058,13 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
return 0;
+err_release_dma:
+ if (host->use_dma)
+ jz4740_mmc_release_dma_channels(host);
err_free_irq:
free_irq(host->irq, host);
err_free_gpios:
jz4740_mmc_free_gpios(pdev);
-err_release_dma:
- if (host->use_dma)
- jz4740_mmc_release_dma_channels(host);
err_free_host:
mmc_free_host(mmc);
--
2.16.2
