Hi, This patch series adds initial support for the Microsemi MIPS SoCs. It is currently focusing on the Microsemi Ocelot (VSC7513, VSC7514). Changes in v4: - dropped the reset driver as it has already been taken - Updated the MAINTAINERS entry (new files, changed email address) - moved to the MIPS generic infrastructure - corrected the cpu compatible in ocelot.dtsi Alexandre Belloni (6): dt-bindings: Add vendor prefix for Microsemi Corporation dt-bindings: mips: Add bindings for Microsemi SoCs MIPS: mscc: add ocelot dtsi MIPS: mscc: add ocelot PCB123 device tree MIPS: generic: Add support for Microsemi Ocelot MAINTAINERS: Add entry for Microsemi MIPS SoCs Documentation/devicetree/bindings/mips/mscc.txt | 44 +++++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + MAINTAINERS | 9 ++ arch/mips/Makefile | 4 + arch/mips/boot/dts/Makefile | 1 + arch/mips/boot/dts/mscc/Makefile | 3 + arch/mips/boot/dts/mscc/ocelot.dtsi | 110 +++++++++++++++++++++ arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 27 +++++ arch/mips/configs/generic/board-ocelot.config | 40 ++++++++ arch/mips/generic/Kconfig | 17 ++++ arch/mips/generic/Makefile | 1 + arch/mips/generic/board-ocelot.c | 83 ++++++++++++++++ 12 files changed, 340 insertions(+) create mode 100644 Documentation/devicetree/bindings/mips/mscc.txt create mode 100644 arch/mips/boot/dts/mscc/Makefile create mode 100644 arch/mips/boot/dts/mscc/ocelot.dtsi create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts create mode 100644 arch/mips/configs/generic/board-ocelot.config create mode 100644 arch/mips/generic/board-ocelot.c -- 2.16.2
