The Minnow PHY reset GPIO is set to 0 to enter reset & 1 to leave reset
- that is, it is an active low GPIO. In order to allow for the code to
be made more generic by further patches, indicate to the GPIO subsystem
that the GPIO is active low & invert the values it is set to such that
they reflect logically whether the device is being reset or not.
Signed-off-by: Paul Burton <paul.burton@xxxxxxxx>
Cc: David S. Miller <davem@xxxxxxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxx
Cc: netdev@xxxxxxxxxxxxxxx
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 7cd494611a74..d5c6f2e2d3a2 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2688,7 +2688,8 @@ static int pch_gbe_probe(struct pci_dev *pdev,
*/
static int pch_gbe_minnow_platform_init(struct pci_dev *pdev)
{
- unsigned long flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH | GPIOF_EXPORT;
+ unsigned long flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW |
+ GPIOF_EXPORT | GPIOF_ACTIVE_LOW;
unsigned gpio = MINNOW_PHY_RESET_GPIO;
int ret;
@@ -2700,10 +2701,10 @@ static int pch_gbe_minnow_platform_init(struct pci_dev *pdev)
return ret;
}
- gpio_set_value(gpio, 0);
- usleep_range(1250, 1500);
gpio_set_value(gpio, 1);
usleep_range(1250, 1500);
+ gpio_set_value(gpio, 0);
+ usleep_range(1250, 1500);
return ret;
}
--
2.16.1
