On Tue, Jan 16, 2018 at 11:12:36AM +0100, Alexandre Belloni wrote:
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 350a990fc719..a9db028a0338 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -527,6 +527,30 @@ config MIPS_MALTA
> This enables support for the MIPS Technologies Malta evaluation
> board.
>
> +config MSCC_OCELOT
> + bool "Microsemi Ocelot architecture"
> + select BOOT_RAW
> + select CEVT_R4K
> + select CSRC_R4K
> + select IRQ_MIPS_CPU
> + select DMA_NONCOHERENT
> + select SYS_HAS_CPU_MIPS32_R2
> + select SYS_SUPPORTS_32BIT_KERNEL
> + select SYS_SUPPORTS_BIG_ENDIAN
> + select SYS_SUPPORTS_LITTLE_ENDIAN
> + select SYS_HAS_EARLY_PRINTK
> + select USE_GENERIC_EARLY_PRINTK_8250
> + select MSCC_OCELOT_IRQ
> + select PINCTRL
> + select GPIOLIB
> + select COMMON_CLK
> + select USE_OF
> + select BUILTIN_DTB
> + select LIBFDT
Please sort alphanumerically.
> + help
> + This enables support for the Microsemi Ocelot architecture.
> + It builds a generic DT-based kernel image.
> +
> config MACH_PIC32
> bool "Microchip PIC32 Family"
> help
...
> diff --git a/arch/mips/mscc/Platform b/arch/mips/mscc/Platform
> new file mode 100644
> index 000000000000..9ae874c8f136
> --- /dev/null
> +++ b/arch/mips/mscc/Platform
> @@ -0,0 +1,12 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +#
> +# Microsemi MIPS SoC support
> +#
> +# License: Dual MIT/GPL
> +# Copyright (c) 2017 Microsemi Corporation
> +
> +#
> +# Microsemi Ocelot board(s)
> +#
> +platform-$(CONFIG_MSCC_OCELOT) += mscc/
Please use tabs to align
> +load-$(CONFIG_MSCC_OCELOT) += 0x80100000
Please drop the space after the tab.
> diff --git a/arch/mips/mscc/setup.c b/arch/mips/mscc/setup.c
> new file mode 100644
> index 000000000000..77803edd7bfd
> --- /dev/null
> +++ b/arch/mips/mscc/setup.c
> @@ -0,0 +1,106 @@
...
> +
> +#include <asm/time.h>
> +#include <asm/idle.h>
> +#include <asm/prom.h>
> +#include <asm/reboot.h>
Please sort these includes alphanumerically if possible.
> +
> +static void __init ocelot_earlyprintk_init(void)
> +{
> + void __iomem *uart_base;
> +
> + uart_base = ioremap_nocache(0x70100000, 0x0f);
Maybe these hex literals (the address at least) can use #defines.
0xf is an odd size when the 2 below indicates 32-bit registers.
> + setup_8250_early_printk_port((unsigned long)uart_base, 2, 50000);
> +}
...
> +extern void (*late_time_init)(void);
This is already declared in linux/init.h which you include, so I think
you can drop it.
> +void __init device_tree_init(void)
> +{
> + if (!initial_boot_params)
> + return;
I think flatten_and_copy_device_tree() already checks this (with a
warning), so this could be dropped.
Cheers
James
Attachment:
signature.asc
Description: Digital signature
