On Tue, Dec 26, 2017 at 11:25:59AM +0800, Jiaxun Yang wrote:
> To operate EC from platform driver, this head file need able to be include
> from anywhere. This patch just move ec_kb3310b.h to include dir and
> clean up ec_kb3310b.h.
The grammar could be improved, and also please avoid referring to the
patch, just say what the patch does, e.g.
To operate the EC from its platform driver, the ec_kb3310b.h header
needs to be able to be included from outside of the loongson64
directory. Move ec_kb3310b.h to asm/mach-loongson64 and clean it up by
doing X, Y and Z.
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
> ---
> arch/mips/include/asm/mach-loongson64/ec_kb3310b.h | 170 +++++++++++++++++++
> arch/mips/loongson64/lemote-2f/ec_kb3310b.c | 2 +-
> arch/mips/loongson64/lemote-2f/ec_kb3310b.h | 188 ---------------------
For review purposes please separate moving the file from cleaning it up.
Cheers
James
> arch/mips/loongson64/lemote-2f/pm.c | 4 +-
> arch/mips/loongson64/lemote-2f/reset.c | 4 +-
> 5 files changed, 175 insertions(+), 193 deletions(-)
> create mode 100644 arch/mips/include/asm/mach-loongson64/ec_kb3310b.h
> delete mode 100644 arch/mips/loongson64/lemote-2f/ec_kb3310b.h
>
> diff --git a/arch/mips/include/asm/mach-loongson64/ec_kb3310b.h b/arch/mips/include/asm/mach-loongson64/ec_kb3310b.h
> new file mode 100644
> index 000000000000..2e8690532ea5
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson64/ec_kb3310b.h
> @@ -0,0 +1,170 @@
> +/*
> + * KB3310B Embedded Controller
> + *
> + * Copyright (C) 2008 Lemote Inc.
> + * Author: liujl <liujl@xxxxxxxxxx>, 2008-03-14
> + * Copyright (C) 2009 Lemote Inc.
> + * Author: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef _EC_KB3310B_H
> +#define _EC_KB3310B_H
> +
> +extern unsigned char ec_read(unsigned short addr);
> +extern void ec_write(unsigned short addr, unsigned char val);
> +extern int ec_query_seq(unsigned char cmd);
> +extern int ec_query_event_num(void);
> +extern int ec_get_event_num(void);
> +
> +typedef int (*sci_handler) (int status);
> +extern sci_handler yeeloong_report_lid_status;
> +
> +#define ON 1
> +#define OFF 0
> +
> +#define SCI_IRQ_NUM 0x0A
> +
> +/*
> + * The following registers are determined by the EC index configuration.
> + * 1, fill the PORT_HIGH as EC register high part.
> + * 2, fill the PORT_LOW as EC register low part.
> + * 3, fill the PORT_DATA as EC register write data or get the data from it.
> + */
> +#define EC_IO_PORT_HIGH 0x0381
> +#define EC_IO_PORT_LOW 0x0382
> +#define EC_IO_PORT_DATA 0x0383
> +
> +/*
> + * EC delay time is 500us for register and status access
> + */
> +#define EC_REG_DELAY 500 /* unit : us */
> +#define EC_CMD_TIMEOUT 0x1000
> +
> +/*
> + * EC access port for SCI communication
> + */
> +#define EC_CMD_PORT 0x66
> +#define EC_STS_PORT 0x66
> +#define EC_DAT_PORT 0x62
> +#define CMD_INIT_IDLE_MODE 0xdd
> +#define CMD_EXIT_IDLE_MODE 0xdf
> +#define CMD_INIT_RESET_MODE 0xd8
> +#define CMD_REBOOT_SYSTEM 0x8c
> +#define CMD_GET_EVENT_NUM 0x84
> +#define CMD_PROGRAM_PIECE 0xda
> +
> +/* Temperature & Fan registers */
> +#define REG_TEMPERATURE_VALUE 0xF458
> +#define REG_FAN_AUTO_MAN_SWITCH 0xF459
> +#define BIT_FAN_AUTO 0
> +#define BIT_FAN_MANUAL 1
> +#define REG_FAN_CONTROL 0xF4D2
> +#define REG_FAN_STATUS 0xF4DA
> +#define REG_FAN_SPEED_HIGH 0xFE22
> +#define REG_FAN_SPEED_LOW 0xFE23
> +#define REG_FAN_SPEED_LEVEL 0xF4CC
> +/* Fan speed divider */
> +#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/
> +
> +/* Battery registers */
> +#define REG_BAT_DESIGN_CAP_HIGH 0xF77D
> +#define REG_BAT_DESIGN_CAP_LOW 0xF77E
> +#define REG_BAT_FULLCHG_CAP_HIGH 0xF780
> +#define REG_BAT_FULLCHG_CAP_LOW 0xF781
> +#define REG_BAT_DESIGN_VOL_HIGH 0xF782
> +#define REG_BAT_DESIGN_VOL_LOW 0xF783
> +#define REG_BAT_CURRENT_HIGH 0xF784
> +#define REG_BAT_CURRENT_LOW 0xF785
> +#define REG_BAT_VOLTAGE_HIGH 0xF786
> +#define REG_BAT_VOLTAGE_LOW 0xF787
> +#define REG_BAT_TEMPERATURE_HIGH 0xF788
> +#define REG_BAT_TEMPERATURE_LOW 0xF789
> +#define REG_BAT_RELATIVE_CAP_HIGH 0xF492
> +#define REG_BAT_RELATIVE_CAP_LOW 0xF493
> +#define REG_BAT_VENDOR 0xF4C4
> +#define FLAG_BAT_VENDOR_SANYO 0x01
> +#define FLAG_BAT_VENDOR_SIMPLO 0x02
> +#define REG_BAT_CELL_COUNT 0xF4C6
> +#define FLAG_BAT_CELL_3S1P 0x03
> +#define FLAG_BAT_CELL_3S2P 0x06
> +#define REG_BAT_CHARGE 0xF4A2
> +#define FLAG_BAT_CHARGE_DISCHARGE 0x01
> +#define FLAG_BAT_CHARGE_CHARGE 0x02
> +#define FLAG_BAT_CHARGE_ACPOWER 0x00
> +#define REG_BAT_STATUS 0xF4B0
> +#define BIT_BAT_STATUS_LOW (1 << 5)
> +#define BIT_BAT_STATUS_DESTROY (1 << 2)
> +#define BIT_BAT_STATUS_FULL (1 << 1)
> +#define BIT_BAT_STATUS_IN (1 << 0)
> +#define REG_BAT_CHARGE_STATUS 0xF4B1
> +#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2)
> +#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1)
> +#define REG_BAT_STATE 0xF482
> +#define REG_BAT_POWER 0xF440
> +#define BIT_BAT_POWER_S3 (1 << 2)
> +#define BIT_BAT_POWER_ON (1 << 1)
> +#define BIT_BAT_POWER_ACIN (1 << 0)
> +
> +/* Audio: rd/wr */
> +#define REG_AUDIO_VOLUME 0xF46C
> +#define REG_AUDIO_MUTE 0xF4E7
> +#define REG_AUDIO_BEEP 0xF4D0
> +/* USB port power or not: rd/wr */
> +#define REG_USB0_FLAG 0xF461
> +#define REG_USB1_FLAG 0xF462
> +#define REG_USB2_FLAG 0xF463
> +/* LID */
> +#define REG_LID_DETECT 0xF4BD
> +/* CRT */
> +#define REG_CRT_DETECT 0xF4AD
> +/* LCD backlight brightness adjust: 9 levels */
> +#define REG_DISPLAY_BRIGHTNESS 0xF4F5
> +/* LCD backlight control: off/restore */
> +#define REG_BACKLIGHT_CTRL 0xF7BD
> +/* Reset the machine auto-clear: rd/wr */
> +#define REG_RESET 0xF4EC
> +/* Light the led: rd/wr */
> +#define REG_LED 0xF4C8
> +#define BIT_LED_RED_POWER (1 << 0)
> +#define BIT_LED_ORANGE_POWER (1 << 1)
> +#define BIT_LED_GREEN_CHARGE (1 << 2)
> +#define BIT_LED_RED_CHARGE (1 << 3)
> +#define BIT_LED_NUMLOCK (1 << 4)
> +/* Test led mode, all led on/off */
> +#define REG_LED_TEST 0xF4C2
> +#define BIT_LED_TEST_IN 1
> +#define BIT_LED_TEST_OUT 0
> +/* Camera on/off */
> +#define REG_CAMERA_STATUS 0xF46A
> +#define REG_CAMERA_CONTROL 0xF7B7
> +/* Wlan Status */
> +#define REG_WLAN 0xF4FA
> +#define REG_DISPLAY_LCD 0xF79F
> +
> +/* SCI Event Number from EC */
> +enum {
> + EVENT_LID = 0x23, /* Turn on/off LID */
> + EVENT_SWITCHVIDEOMODE, /* Fn+F3 for display switch */
> + EVENT_SLEEP, /* Fn+F1 for entering sleep mode */
> + EVENT_OVERTEMP, /* Over-temperature happened */
> + EVENT_CRT_DETECT, /* CRT is connected */
> + EVENT_CAMERA, /* Camera on/off */
> + EVENT_USB_OC2, /* USB2 Over Current occurred */
> + EVENT_USB_OC0, /* USB0 Over Current occurred */
> + EVENT_DISPLAYTOGGLE, /* Fn+F2, Turn on/off backlight */
> + EVENT_AUDIO_MUTE, /* Fn+F4, Mute on/off */
> + EVENT_DISPLAY_BRIGHTNESS,/* Fn+^/V, LCD backlight brightness adjust */
> + EVENT_AC_BAT, /* AC & Battery relative issue */
> + EVENT_AUDIO_VOLUME, /* Fn+<|>, Volume adjust */
> + EVENT_WLAN, /* Wlan on/off */
> +};
> +
> +#define EVENT_START EVENT_LID
> +#define EVENT_END EVENT_WLAN
> +
> +#endif /* !_EC_KB3310B_H */
> diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
> index 321822997e76..6e416d55b42a 100644
> --- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
> +++ b/arch/mips/loongson64/lemote-2f/ec_kb3310b.c
> @@ -15,7 +15,7 @@
> #include <linux/spinlock.h>
> #include <linux/delay.h>
>
> -#include "ec_kb3310b.h"
> +#include <ec_kb3310b.h>
>
> static DEFINE_SPINLOCK(index_access_lock);
> static DEFINE_SPINLOCK(port_access_lock);
> diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h b/arch/mips/loongson64/lemote-2f/ec_kb3310b.h
> deleted file mode 100644
> index 5a3f1860d4d2..000000000000
> --- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h
> +++ /dev/null
> @@ -1,188 +0,0 @@
> -/*
> - * KB3310B Embedded Controller
> - *
> - * Copyright (C) 2008 Lemote Inc.
> - * Author: liujl <liujl@xxxxxxxxxx>, 2008-03-14
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#ifndef _EC_KB3310B_H
> -#define _EC_KB3310B_H
> -
> -extern unsigned char ec_read(unsigned short addr);
> -extern void ec_write(unsigned short addr, unsigned char val);
> -extern int ec_query_seq(unsigned char cmd);
> -extern int ec_query_event_num(void);
> -extern int ec_get_event_num(void);
> -
> -typedef int (*sci_handler) (int status);
> -extern sci_handler yeeloong_report_lid_status;
> -
> -#define SCI_IRQ_NUM 0x0A
> -
> -/*
> - * The following registers are determined by the EC index configuration.
> - * 1, fill the PORT_HIGH as EC register high part.
> - * 2, fill the PORT_LOW as EC register low part.
> - * 3, fill the PORT_DATA as EC register write data or get the data from it.
> - */
> -#define EC_IO_PORT_HIGH 0x0381
> -#define EC_IO_PORT_LOW 0x0382
> -#define EC_IO_PORT_DATA 0x0383
> -
> -/*
> - * EC delay time is 500us for register and status access
> - */
> -#define EC_REG_DELAY 500 /* unit : us */
> -#define EC_CMD_TIMEOUT 0x1000
> -
> -/*
> - * EC access port for SCI communication
> - */
> -#define EC_CMD_PORT 0x66
> -#define EC_STS_PORT 0x66
> -#define EC_DAT_PORT 0x62
> -#define CMD_INIT_IDLE_MODE 0xdd
> -#define CMD_EXIT_IDLE_MODE 0xdf
> -#define CMD_INIT_RESET_MODE 0xd8
> -#define CMD_REBOOT_SYSTEM 0x8c
> -#define CMD_GET_EVENT_NUM 0x84
> -#define CMD_PROGRAM_PIECE 0xda
> -
> -/* temperature & fan registers */
> -#define REG_TEMPERATURE_VALUE 0xF458
> -#define REG_FAN_AUTO_MAN_SWITCH 0xF459
> -#define BIT_FAN_AUTO 0
> -#define BIT_FAN_MANUAL 1
> -#define REG_FAN_CONTROL 0xF4D2
> -#define BIT_FAN_CONTROL_ON (1 << 0)
> -#define BIT_FAN_CONTROL_OFF (0 << 0)
> -#define REG_FAN_STATUS 0xF4DA
> -#define BIT_FAN_STATUS_ON (1 << 0)
> -#define BIT_FAN_STATUS_OFF (0 << 0)
> -#define REG_FAN_SPEED_HIGH 0xFE22
> -#define REG_FAN_SPEED_LOW 0xFE23
> -#define REG_FAN_SPEED_LEVEL 0xF4CC
> -/* fan speed divider */
> -#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/
> -
> -/* battery registers */
> -#define REG_BAT_DESIGN_CAP_HIGH 0xF77D
> -#define REG_BAT_DESIGN_CAP_LOW 0xF77E
> -#define REG_BAT_FULLCHG_CAP_HIGH 0xF780
> -#define REG_BAT_FULLCHG_CAP_LOW 0xF781
> -#define REG_BAT_DESIGN_VOL_HIGH 0xF782
> -#define REG_BAT_DESIGN_VOL_LOW 0xF783
> -#define REG_BAT_CURRENT_HIGH 0xF784
> -#define REG_BAT_CURRENT_LOW 0xF785
> -#define REG_BAT_VOLTAGE_HIGH 0xF786
> -#define REG_BAT_VOLTAGE_LOW 0xF787
> -#define REG_BAT_TEMPERATURE_HIGH 0xF788
> -#define REG_BAT_TEMPERATURE_LOW 0xF789
> -#define REG_BAT_RELATIVE_CAP_HIGH 0xF492
> -#define REG_BAT_RELATIVE_CAP_LOW 0xF493
> -#define REG_BAT_VENDOR 0xF4C4
> -#define FLAG_BAT_VENDOR_SANYO 0x01
> -#define FLAG_BAT_VENDOR_SIMPLO 0x02
> -#define REG_BAT_CELL_COUNT 0xF4C6
> -#define FLAG_BAT_CELL_3S1P 0x03
> -#define FLAG_BAT_CELL_3S2P 0x06
> -#define REG_BAT_CHARGE 0xF4A2
> -#define FLAG_BAT_CHARGE_DISCHARGE 0x01
> -#define FLAG_BAT_CHARGE_CHARGE 0x02
> -#define FLAG_BAT_CHARGE_ACPOWER 0x00
> -#define REG_BAT_STATUS 0xF4B0
> -#define BIT_BAT_STATUS_LOW (1 << 5)
> -#define BIT_BAT_STATUS_DESTROY (1 << 2)
> -#define BIT_BAT_STATUS_FULL (1 << 1)
> -#define BIT_BAT_STATUS_IN (1 << 0)
> -#define REG_BAT_CHARGE_STATUS 0xF4B1
> -#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2)
> -#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1)
> -#define REG_BAT_STATE 0xF482
> -#define BIT_BAT_STATE_CHARGING (1 << 1)
> -#define BIT_BAT_STATE_DISCHARGING (1 << 0)
> -#define REG_BAT_POWER 0xF440
> -#define BIT_BAT_POWER_S3 (1 << 2)
> -#define BIT_BAT_POWER_ON (1 << 1)
> -#define BIT_BAT_POWER_ACIN (1 << 0)
> -
> -/* other registers */
> -/* Audio: rd/wr */
> -#define REG_AUDIO_VOLUME 0xF46C
> -#define REG_AUDIO_MUTE 0xF4E7
> -#define REG_AUDIO_BEEP 0xF4D0
> -/* USB port power or not: rd/wr */
> -#define REG_USB0_FLAG 0xF461
> -#define REG_USB1_FLAG 0xF462
> -#define REG_USB2_FLAG 0xF463
> -#define BIT_USB_FLAG_ON 1
> -#define BIT_USB_FLAG_OFF 0
> -/* LID */
> -#define REG_LID_DETECT 0xF4BD
> -#define BIT_LID_DETECT_ON 1
> -#define BIT_LID_DETECT_OFF 0
> -/* CRT */
> -#define REG_CRT_DETECT 0xF4AD
> -#define BIT_CRT_DETECT_PLUG 1
> -#define BIT_CRT_DETECT_UNPLUG 0
> -/* LCD backlight brightness adjust: 9 levels */
> -#define REG_DISPLAY_BRIGHTNESS 0xF4F5
> -/* Black screen Status */
> -#define BIT_DISPLAY_LCD_ON 1
> -#define BIT_DISPLAY_LCD_OFF 0
> -/* LCD backlight control: off/restore */
> -#define REG_BACKLIGHT_CTRL 0xF7BD
> -#define BIT_BACKLIGHT_ON 1
> -#define BIT_BACKLIGHT_OFF 0
> -/* Reset the machine auto-clear: rd/wr */
> -#define REG_RESET 0xF4EC
> -#define BIT_RESET_ON 1
> -/* Light the led: rd/wr */
> -#define REG_LED 0xF4C8
> -#define BIT_LED_RED_POWER (1 << 0)
> -#define BIT_LED_ORANGE_POWER (1 << 1)
> -#define BIT_LED_GREEN_CHARGE (1 << 2)
> -#define BIT_LED_RED_CHARGE (1 << 3)
> -#define BIT_LED_NUMLOCK (1 << 4)
> -/* Test led mode, all led on/off */
> -#define REG_LED_TEST 0xF4C2
> -#define BIT_LED_TEST_IN 1
> -#define BIT_LED_TEST_OUT 0
> -/* Camera on/off */
> -#define REG_CAMERA_STATUS 0xF46A
> -#define BIT_CAMERA_STATUS_ON 1
> -#define BIT_CAMERA_STATUS_OFF 0
> -#define REG_CAMERA_CONTROL 0xF7B7
> -#define BIT_CAMERA_CONTROL_OFF 0
> -#define BIT_CAMERA_CONTROL_ON 1
> -/* Wlan Status */
> -#define REG_WLAN 0xF4FA
> -#define BIT_WLAN_ON 1
> -#define BIT_WLAN_OFF 0
> -#define REG_DISPLAY_LCD 0xF79F
> -
> -/* SCI Event Number from EC */
> -enum {
> - EVENT_LID = 0x23, /* LID open/close */
> - EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */
> - EVENT_SLEEP, /* Fn+F1 for entering sleep mode */
> - EVENT_OVERTEMP, /* Over-temperature happened */
> - EVENT_CRT_DETECT, /* CRT is connected */
> - EVENT_CAMERA, /* Camera on/off */
> - EVENT_USB_OC2, /* USB2 Over Current occurred */
> - EVENT_USB_OC0, /* USB0 Over Current occurred */
> - EVENT_BLACK_SCREEN, /* Turn on/off backlight */
> - EVENT_AUDIO_MUTE, /* Mute on/off */
> - EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */
> - EVENT_AC_BAT, /* AC & Battery relative issue */
> - EVENT_AUDIO_VOLUME, /* Volume adjust */
> - EVENT_WLAN, /* Wlan on/off */
> - EVENT_END
> -};
> -
> -#endif /* !_EC_KB3310B_H */
> diff --git a/arch/mips/loongson64/lemote-2f/pm.c b/arch/mips/loongson64/lemote-2f/pm.c
> index 6859e934862d..0768739155f6 100644
> --- a/arch/mips/loongson64/lemote-2f/pm.c
> +++ b/arch/mips/loongson64/lemote-2f/pm.c
> @@ -88,7 +88,7 @@ EXPORT_SYMBOL(yeeloong_report_lid_status);
> static void yeeloong_lid_update_task(struct work_struct *work)
> {
> if (yeeloong_report_lid_status)
> - yeeloong_report_lid_status(BIT_LID_DETECT_ON);
> + yeeloong_report_lid_status(ON);
> }
>
> int wakeup_loongson(void)
> @@ -118,7 +118,7 @@ int wakeup_loongson(void)
> /* check the LID status */
> lid_status = ec_read(REG_LID_DETECT);
> /* wakeup cpu when people open the LID */
> - if (lid_status == BIT_LID_DETECT_ON) {
> + if (lid_status == ON) {
> /* If we call it directly here, the WARNING
> * will be sent out by getnstimeofday
> * via "WARN_ON(timekeeping_suspended);"
> diff --git a/arch/mips/loongson64/lemote-2f/reset.c b/arch/mips/loongson64/lemote-2f/reset.c
> index a26ca7fcd7e0..2b72b197c51d 100644
> --- a/arch/mips/loongson64/lemote-2f/reset.c
> +++ b/arch/mips/loongson64/lemote-2f/reset.c
> @@ -20,7 +20,7 @@
> #include <loongson.h>
>
> #include <cs5536/cs5536.h>
> -#include "ec_kb3310b.h"
> +#include <ec_kb3310b.h>
>
> static void reset_cpu(void)
> {
> @@ -81,7 +81,7 @@ static void ml2f_reboot(void)
> reset_cpu();
>
> /* sending an reset signal to EC(embedded controller) */
> - ec_write(REG_RESET, BIT_RESET_ON);
> + ec_write(REG_RESET, ON);
> }
>
> #define yl2f89_reboot ml2f_reboot
> --
> 2.15.1
>
Attachment:
signature.asc
Description: Digital signature
