On 11 January 2018 at 20:38, Rob Herring <robh@xxxxxxxxxx> wrote: > On Sat, Jan 6, 2018 at 6:43 AM, PrasannaKumar Muralidharan > <prasannatsmkumar@xxxxxxxxx> wrote: >> Hi Rob, >> >> On 4 January 2018 at 01:32, Rob Herring <robh@xxxxxxxxxx> wrote: >>> On Thu, Dec 28, 2017 at 10:29:52PM +0100, Mathieu Malaterre wrote: >>>> From: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx> >>>> >>>> This patch brings support for the JZ4780 efuse. Currently it only expose >>>> a read only access to the entire 8K bits efuse memory. >>>> >>>> Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx> >>>> Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx> >>>> Signed-off-by: Mathieu Malaterre <malat@xxxxxxxxxx> >>>> --- >>>> .../ABI/testing/sysfs-driver-jz4780-efuse | 16 ++ >>>> .../bindings/nvmem/ingenic,jz4780-efuse.txt | 17 ++ >>> >>> Please split bindings to separate patch. >>> >>>> MAINTAINERS | 5 + >>>> arch/mips/boot/dts/ingenic/jz4780.dtsi | 40 ++- >>> >>> dts files should also be separate. >>> >>>> drivers/nvmem/Kconfig | 10 + >>>> drivers/nvmem/Makefile | 2 + >>>> drivers/nvmem/jz4780-efuse.c | 305 +++++++++++++++++++++ >>>> 7 files changed, 383 insertions(+), 12 deletions(-) >>>> create mode 100644 Documentation/ABI/testing/sysfs-driver-jz4780-efuse >>>> create mode 100644 Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.txt >>>> create mode 100644 drivers/nvmem/jz4780-efuse.c >>>> >>>> diff --git a/Documentation/ABI/testing/sysfs-driver-jz4780-efuse b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse >>>> new file mode 100644 >>>> index 000000000000..bb6f5d6ceea0 >>>> --- /dev/null >>>> +++ b/Documentation/ABI/testing/sysfs-driver-jz4780-efuse >>>> @@ -0,0 +1,16 @@ >>>> +What: /sys/devices/*/<our-device>/nvmem >>>> +Date: December 2017 >>>> +Contact: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx> >>>> +Description: read-only access to the efuse on the Ingenic JZ4780 SoC >>>> + The SoC has a one time programmable 8K efuse that is >>>> + split into segments. The driver supports read only. >>>> + The segments are >>>> + 0x000 64 bit Random Number >>>> + 0x008 128 bit Ingenic Chip ID >>>> + 0x018 128 bit Customer ID >>>> + 0x028 3520 bit Reserved >>>> + 0x1E0 8 bit Protect Segment >>>> + 0x1E1 2296 bit HDMI Key >>>> + 0x300 2048 bit Security boot key >>> >>> Why do these need to be exposed to userspace? >>> >>> sysfs is 1 value per file and this is lots of different things. >>> >>> We already have ways to feed random data (entropy) to the system. And we >>> have a way to expose SoC ID info to userspace (socdev). >> >> Currently ingenic chip id is not used anywhere. The vendor BSP exposed >> only chip id and customer id. Should we do the same? Please provide >> your suggestion. > > No. Don't create an ABI if you don't really need it. Rob, MAC address of the ethernet device is stored in customer id segment of efuse. So only customer id is needed. Do you think exposing customer id would suffice? Srini, Only user would be dm900 ethernet driver (need to make changes to it once the efuse driver goes in). There is no need to expose it to user space. I am planning to modify nvmem core to not expose efuse if the efuse driver chooses so. Do you think it makes sense? The need to maintain ABI for user space disappears if such a change is introduced. Thanks, PrasannaKumar
