> On Wed, Dec 27, 2017 at 03:37:51PM +0100, Aleksandar Markovic wrote: > > From: Paul Burton <paul.burton@xxxxxxxx> > > > > Document a binding for the MIPS Cluster Power Controller (CPC) that > > allows the device tree to specify where the CPC registers are located. > > > > Signed-off-by: Paul Burton <paul.burton@xxxxxxxx> > > Signed-off-by: Aleksandar Markovic <aleksandar.markovic@xxxxxxxx> > > --- > > Documentation/devicetree/bindings/power/mti,mips-cpc.txt | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/power/mti,mips-cpc.txt > > > > diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt > > new file mode 100644 > > Is it worth adding to the MIPS GENERIC PLATFORM entry of MAINTAINERS, > given that it directly benefits it? > > Cheers > James If nobody objects, in the v4 of this series, as a part of this particular patch, I am going to add the line: F: Documentation/devicetree/bindings/power/mti,mips-cpc.txt to the following segment in MAINTAINERS file: MIPS GENERIC PLATFORM M: Paul Burton <paul.burton@xxxxxxxx> L: linux-mips@xxxxxxxxxxxxxx S: Supported F: arch/mips/generic/ F: arch/mips/tools/generic-board-config.sh v4 is planned to be sent by the end of the day. Thanks, Aleksandar
