Hi Paul,
On Thu, Dec 28, 2017 at 5:29 PM, Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote:
> - The previous node requested a memory area of 0x100 bytes, while the
> driver only manipulates four registers present in the first 0x10 bytes.
>
> - The driver requests for the "rtc" clock, but the previous node did not
> provide any.
>
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
> arch/mips/boot/dts/ingenic/jz4780.dtsi | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
> index 9b5794667aee..a52f59bf58c7 100644
> --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
> @@ -221,7 +221,10 @@
>
> watchdog: watchdog@10002000 {
> compatible = "ingenic,jz4780-watchdog";
> - reg = <0x10002000 0x100>;
> + reg = <0x10002000 0x10>;
> +
> + clocks = <&cgu JZ4780_CLK_RTCLK>;
> + clock-names = "rtc";
> };
>
> nemc: nemc@13410000 {
> --
> 2.11.0
>
>
Looks good, thanks for fixing my mess. Tested on MIPS Creator CI20:
Dec 28 17:27:50 ci20 watchdog[17531]: starting daemon (5.14):
Dec 28 17:27:50 ci20 watchdog[17531]: int=1s realtime=yes sync=no
soft=no mla=0 mem=0
Dec 28 17:27:50 ci20 watchdog[17531]: ping: no machine to check
Dec 28 17:27:50 ci20 watchdog[17531]: file: no file to check
Dec 28 17:27:50 ci20 watchdog[17531]: pidfile: no server process to check
Dec 28 17:27:50 ci20 watchdog[17531]: interface: no interface to check
Dec 28 17:27:50 ci20 watchdog[17531]: temperature: no sensors to check
Dec 28 17:27:50 ci20 watchdog[17531]: test=none(0) repair=none(0)
alive=/dev/watchdog heartbeat=none to=root no_act=no force=no
Dec 28 17:27:50 ci20 watchdog[17531]: watchdog now set to 60 seconds
Dec 28 17:27:50 ci20 watchdog[17531]: hardware watchdog identity:
jz4740 Watchdog
pkill + reboot = ok
Reviewed-by: Mathieu Malaterre <malat@xxxxxxxxxx>
