On 8 December 2017 at 21:16, Alexandre Belloni
<alexandre.belloni@xxxxxxxxxxxxxxxxxx> wrote:
> Add a device tree for the Microsemi Ocelot PCB123 evaluation board.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
> ---
> arch/mips/boot/dts/mscc/Makefile | 2 ++
> arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 27 +++++++++++++++++++++++++++
> 2 files changed, 29 insertions(+)
> create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts
>
> diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile
> index f0a155a74e02..09a1c4b97de2 100644
> --- a/arch/mips/boot/dts/mscc/Makefile
> +++ b/arch/mips/boot/dts/mscc/Makefile
> @@ -1,3 +1,5 @@
> +dtb-$(CONFIG_MSCC_OCELOT) += ocelot_pcb123.dtb
> +
> obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
>
> # Force kbuild to make empty built-in.o if necessary
> diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
> new file mode 100644
> index 000000000000..42bd404471f6
> --- /dev/null
> +++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
> @@ -0,0 +1,27 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/* Copyright (c) 2017 Microsemi Corporation */
> +
> +/dts-v1/;
> +
> +#include "ocelot.dtsi"
> +
> +/ {
> + compatible = "mscc,ocelot-pcb123", "mscc,ocelot";
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x0e000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> --
> 2.15.1
>
>
Looks good to me.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>
Regards,
PrasannaKumar
