On 15/12/2017 at 14:23:32 -0600, Rob Herring wrote:
> On Fri, Dec 08, 2017 at 04:46:12PM +0100, Alexandre Belloni wrote:
> > Add binding documentation for the Microsemi Ocelot reset block.
> >
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Cc: Sebastian Reichel <sre@xxxxxxxxxx>
> > Cc: linux-pm@xxxxxxxxxxxxxxx
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/power/reset/ocelot-reset.txt | 17 +++++++++++++++++
> > 1 file changed, 17 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
> >
> > diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
> > new file mode 100644
> > index 000000000000..1bcf276b04cb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
> > @@ -0,0 +1,17 @@
> > +Microsemi Ocelot reset controller
> > +
> > +The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
> > +SoC MIPS core.
> > +
> > +Required Properties:
> > + - compatible: "mscc,ocelot-chip-reset"
> > +
> > +Example:
> > + syscon@71070000 {
> > + compatible = "mscc,ocelot-chip-regs", "simple-mfd", "syscon";
> > + reg = <0x71070000 0x1c>;
> > +
> > + reset {
> > + compatible = "mscc,ocelot-chip-reset";
>
> Why do you need a subnode here other than as a way to instantiate a
> driver? Can you describe the SOFT_RST register in reg property here
> (without having overlapping regions)?
You mean like:
reset@7107001c {
compatible = "mscc,ocelot-chip-reset";
reg = <0x7107001c 0x4>;
};
I guess that could work.
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
