If a JTAG probe is connected to a MIPS cluster, then the CPC detects it
and latches the CPC.STAT_CONF.EJTAG_PROBE bit to 1. While set,
attempting to send a power-down command to a core will be blocked, and
the CPC will instead send the core to clock-off state. This can
interfere with systems fully entering a low power state where all cores,
CM, GIC, etc are powered down.
Detect that a JTAG probe is / has been connected to the cluster and emit
a warning that the attempted power down will fail, to aid debugging
system suspend where it is not currently obvious that a core has not
really powered down and will block a full power down of the cluster. We
use a ratelimited pr_warn since this path will also be hit by cpu idle
if it attempts to put cores into the powered down state.
Signed-off-by: Matt Redfearn <matt.redfearn@xxxxxxxx>
---
arch/mips/kernel/pm-cps.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c
index 421e06dfee72..45776613a5be 100644
--- a/arch/mips/kernel/pm-cps.c
+++ b/arch/mips/kernel/pm-cps.c
@@ -11,6 +11,7 @@
#include <linux/cpuhotplug.h>
#include <linux/init.h>
#include <linux/percpu.h>
+#include <linux/ratelimit.h>
#include <linux/slab.h>
#include <asm/asm-offsets.h>
@@ -143,6 +144,18 @@ int cps_pm_enter_state(enum cps_pm_state state)
/* Setup the VPE to run mips_cps_pm_restore when started again */
if (IS_ENABLED(CONFIG_CPU_PM) && state == CPS_PM_POWER_GATED) {
+ unsigned int stat = read_cpc_cl_stat_conf();
+
+ if (stat & CPC_Cx_STAT_CONF_EJTAG_PROBE) {
+ /*
+ * If we're attempting to gate power to the core, the
+ * JTAG detect bit indicates that the CPC will instead
+ * put the core into clock-off state. Emit a warning.
+ */
+ pr_warn_ratelimited("JTAG probe present - core%d will clock off instead of powering down\n",
+ core);
+ }
+
/* Power gating relies upon CPS SMP */
if (!mips_cps_smp_in_use())
return -EINVAL;
--
2.7.4
