Rather than configuring EIC mode for all CPUs during boot, configure it
locally on each when they come online. This will become important with
multi-cluster support, since clusters may be powered on & off (for
example via hotplug) and would lose the EIC configuration when powered
off.
Signed-off-by: Paul Burton <paul.burton@xxxxxxxx>
Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
Cc: Marc Zyngier <marc.zyngier@xxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxx
---
Changes in v2: None
drivers/irqchip/irq-mips-gic.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
index bd732b256f67..b1320ccb9f94 100644
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -655,6 +655,10 @@ static const struct irq_domain_ops gic_ipi_domain_ops = {
static int gic_cpu_startup(unsigned int cpu)
{
+ /* Enable or disable EIC */
+ change_gic_vl_ctl(GIC_VX_CTL_EIC,
+ cpu_has_veic ? GIC_VX_CTL_EIC : 0);
+
/* Clear all local IRQ masks (ie. disable all local interrupts) */
write_gic_vl_rmask(~0);
@@ -667,7 +671,7 @@ static int gic_cpu_startup(unsigned int cpu)
static int __init gic_of_init(struct device_node *node,
struct device_node *parent)
{
- unsigned int cpu_vec, i, gicconfig, cpu, v[2];
+ unsigned int cpu_vec, i, gicconfig, v[2];
unsigned long reserved;
phys_addr_t gic_base;
struct resource res;
@@ -722,12 +726,6 @@ static int __init gic_of_init(struct device_node *node,
gic_vpes = gic_vpes + 1;
if (cpu_has_veic) {
- /* Set EIC mode for all VPEs */
- for_each_present_cpu(cpu) {
- write_gic_vl_other(mips_cm_vp_id(cpu));
- write_gic_vo_ctl(GIC_VX_CTL_EIC);
- }
-
/* Always use vector 1 in EIC mode */
gic_cpu_pin = 0;
timer_cpu_pin = gic_cpu_pin;
--
2.14.3
