Re: [PATCH 6/8] PCI: host: brcmstb: add MSI capability

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 25, 2017 at 11:40:47AM -0700, Scott Branden wrote:
> Hi Bjorn,
> 
> 
> On 17-10-25 10:23 AM, Bjorn Helgaas wrote:
> >[+cc Ray, Scott, Jon]
> >
> >On Wed, Oct 25, 2017 at 11:28:07AM -0400, Jim Quinlan wrote:
> >>On Tue, Oct 24, 2017 at 2:57 PM, Florian Fainelli <f.fainelli@xxxxxxxxx> wrote:
> >>>Hi Jim,
> >>>
> >>>On 10/24/2017 11:15 AM, Jim Quinlan wrote:
> >>>>This commit adds MSI to the Broadcom STB PCIe host controller. It does
> >>>>not add MSIX since that functionality is not in the HW.  The MSI
> >>>>controller is physically located within the PCIe block, however, there
> >>>>is no reason why the MSI controller could not be moved elsewhere in
> >>>>the future.
> >>>>
> >>>>Since the internal Brcmstb MSI controller is intertwined with the PCIe
> >>>>controller, it is not its own platform device but rather part of the
> >>>>PCIe platform device.
> >>>>
> >>>>Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx>
> >>>>---
> >>>>  drivers/pci/host/Kconfig           |  12 ++
> >>>>  drivers/pci/host/Makefile          |   1 +
> >>>>  drivers/pci/host/pci-brcmstb-msi.c | 318 +++++++++++++++++++++++++++++++++++++
> >>>>  drivers/pci/host/pci-brcmstb.c     |  72 +++++++--
> >>>>  drivers/pci/host/pci-brcmstb.h     |  26 +++
> >>>>  5 files changed, 419 insertions(+), 10 deletions(-)
> >>>>  create mode 100644 drivers/pci/host/pci-brcmstb-msi.c
> >>>>
> >>>>diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> >>>>index b9b4f11..54aa5d2 100644
> >>>>--- a/drivers/pci/host/Kconfig
> >>>>+++ b/drivers/pci/host/Kconfig
> >>>>@@ -228,4 +228,16 @@ config PCI_BRCMSTB
> >>>>       default ARCH_BRCMSTB || BMIPS_GENERIC
> >>>>       help
> >>>>         Adds support for Broadcom Settop Box PCIe host controller.
> >>>>+       To compile this driver as a module, choose m here.
> >>>>+
> >>>>+config PCI_BRCMSTB_MSI
> >>>>+     bool "Broadcom Brcmstb PCIe MSI support"
> >>>>+     depends on ARCH_BRCMSTB || BMIPS_GENERIC
> >>>This could probably be depends on PCI_BRCMSTB, which would imply these
> >>>two conditions. PCI_BRCMSTB_MSI on its own is probably not very useful
> >>>without the parent RC driver.
> >>>
> >>>>+     depends on OF
> >>>>+     depends on PCI_MSI
> >>>>+     default PCI_BRCMSTB
> >>>>+     help
> >>>>+       Say Y here if you want to enable MSI support for Broadcom's iProc
> >>>>+       PCIe controller
> >>>>+
> >>>>  endmenu
> >>>>diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> >>>>index c283321..1026d6f 100644
> >>>>--- a/drivers/pci/host/Makefile
> >>>>+++ b/drivers/pci/host/Makefile
> >>>>@@ -23,6 +23,7 @@ obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
> >>>>  obj-$(CONFIG_VMD) += vmd.o
> >>>>  obj-$(CONFIG_PCI_BRCMSTB) += brcmstb-pci.o
> >>>>  brcmstb-pci-objs := pci-brcmstb.o pci-brcmstb-dma.o
> >>>>+obj-$(CONFIG_PCI_BRCMSTB_MSI) += pci-brcmstb-msi.o
> >>>Should we combine this file with the brcmstb-pci.o? There is probably no
> >>>functional difference, except that pci-brcmstb-msi.ko needs to be loaded
> >>>first, right?
> >>>--
> >>>Florian
> >>If you look at the pci/host/Kconfig you will see that other drivers
> >>also have a separate MSI config (eg iproc, altera, xgene) so there is
> >>precedent.  The reason that pci-brcmstb-msi.c is its own file is
> >>because it depends on an irq function that is not exported.  That is
> >>why CONFIG_PCI_BRCMSTB_MSI is bool, and CONFIG_PCI_BRCMSTB is
> >>tristate.  -- Jim
> >There is precedent, but that doesn't mean I like it :)
> >I would strongly prefer one file per driver when possible.
> >
> >Take iproc for example.  iproc-msi.c is enabled by a Kconfig bool.  It
> >contains a bunch of code with the only external entry points being
> >iproc_msi_init() and iproc_msi_exit().  These are only called via
> >iproc_pcie_bcma_probe() or iproc_pcie_pltfm_probe(), both of which are
> >tristate.  So iproc-msi.c is only compiled if CONFIG_IPROC_BCMA or
> >CONFIG_IPROC_PLATFORM are enabled, but all that text is loaded even if
> >neither module is loaded, which seems suboptimal.
> >
> >I don't care if you have several config options to enable the BCMA
> >probe and the platform probe (although these could probably be
> >replaced in the code by a simple "#ifdef CONFIG_BCMA" and "#ifdef
> >CONFIG_OF"), and making CONFIG_PCIE_IPROC tristate so it can be a
> >module makes sense.  But I think it would be better to put all the
> >code in one file instead of five, and probably remove
> >CONFIG_PCIE_IPROC_MSI.  Maybe this requires exporting some IRQ
> >function that currently isn't exported.  But that seems like a simpler
> >solution than what we currently have.
> Placing pcie-iproc-bcma.c in its own file is useful in being able to
> read the code that is actually used.  BCMA is really unnecessary if
> a few platforms stopped using BCMA and declared everything via
> devicetree or ACPI.  Same with pcie-iproc-platform.c.  Both keep the
> mess out of pcie-iproc.c.

Maybe.  Both pcie-iproc-bcma.c and pcie-iproc-platform.c are small
(280 lines combined) relative to pcie-iproc.c + pcie-iproc-msi.c (2150
lines combined), and keeping them separate requires pcie-iproc.h,
which could otherwise be folded into pcie-iproc.c.  So I'm still a
little skeptical.  You think of combining them as a mess, but I think
of it as a big convenience because I could see all the iproc-related
code in one place :)

> It looks like pcie-iproc-msi.c followed existing pci drivers in
> place.  So if msi was cleaned up through the entire pci drivers then
> yes it would make sense to remove CONFIG_PCIE_IPROC_MSI and combine
> code in pcie-iproc.c.  But I think leaving the bcma and platform
> code in their own files makes it easier for us to work with the code
> rather than placing unused code in ifdefs in the same file.

But I do object *more* to putting MSI in a separate file, especially
given the fact that all PCIe devices that generate interrupts must
support MSI.  So any reasonable PCIe root complex must also support
MSI, and I don't really see the benefit of configuring and building it
separately.

Anyway, iproc is already in the tree, and we *could* maybe change
something eventually.

The question we need to decide now is about how brcmstb should be
structured.  Somebody mentioned an IRQ function that would have to be
exported for the brcmstb main driver & MSI pieces to be combined.  I
don't know what specifically that is, but I thought maybe iproc had
the same issue.

Bjorn


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux