Set the default number of RX and TX queues due to
the recent changes of stmmac driver.
Otherwise the ethernet will crash once it starts.
Signed-off-by: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
---
arch/mips/loongson32/common/platform.c | 38 +++++++++++++++++++---------------
1 file changed, 21 insertions(+), 17 deletions(-)
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index 100f23d..ac584c5 100644
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -183,18 +183,20 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
}
static struct plat_stmmacenet_data ls1x_eth0_pdata = {
- .bus_id = 0,
- .phy_addr = -1,
+ .bus_id = 0,
+ .phy_addr = -1,
#if defined(CONFIG_LOONGSON1_LS1B)
- .interface = PHY_INTERFACE_MODE_MII,
+ .interface = PHY_INTERFACE_MODE_MII,
#elif defined(CONFIG_LOONGSON1_LS1C)
- .interface = PHY_INTERFACE_MODE_RMII,
+ .interface = PHY_INTERFACE_MODE_RMII,
#endif
- .mdio_bus_data = &ls1x_mdio_bus_data,
- .dma_cfg = &ls1x_eth_dma_cfg,
- .has_gmac = 1,
- .tx_coe = 1,
- .init = ls1x_eth_mux_init,
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .rx_queues_to_use = 1,
+ .tx_queues_to_use = 1,
+ .init = ls1x_eth_mux_init,
};
static struct resource ls1x_eth0_resources[] = {
@@ -222,14 +224,16 @@ struct platform_device ls1x_eth0_pdev = {
#ifdef CONFIG_LOONGSON1_LS1B
static struct plat_stmmacenet_data ls1x_eth1_pdata = {
- .bus_id = 1,
- .phy_addr = -1,
- .interface = PHY_INTERFACE_MODE_MII,
- .mdio_bus_data = &ls1x_mdio_bus_data,
- .dma_cfg = &ls1x_eth_dma_cfg,
- .has_gmac = 1,
- .tx_coe = 1,
- .init = ls1x_eth_mux_init,
+ .bus_id = 1,
+ .phy_addr = -1,
+ .interface = PHY_INTERFACE_MODE_MII,
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .rx_queues_to_use = 1,
+ .tx_queues_to_use = 1,
+ .init = ls1x_eth_mux_init,
};
static struct resource ls1x_eth1_resources[] = {
--
1.9.1
