Hi Greg,
On 2 August 2017 at 11:34, Jonas Gorski <jonas.gorski@xxxxxxxxx> wrote:
> Codify using a named clock for the refclk of the uart. This makes it
> easier if we might need to add a gating clock (like present on the
> BCM6345).
>
> Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>
Could I please get a (N)Ack so Ralf can add this patch to his tree?
Regards
Jonas
> ---
> Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt | 6 ++++++
> drivers/tty/serial/bcm63xx_uart.c | 6 ++++--
> 2 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
> index 5c52e5eef16d..8b2b0460259a 100644
> --- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
> +++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt
> @@ -11,6 +11,11 @@ Required properties:
> - clocks: Clock driving the hardware; used to figure out the baud rate
> divisor.
>
> +
> +Optional properties:
> +
> +- clock-names: Should be "refclk".
> +
> Example:
>
> uart0: serial@14e00520 {
> @@ -19,6 +24,7 @@ Example:
> interrupt-parent = <&periph_intc>;
> interrupts = <2>;
> clocks = <&periph_clk>;
> + clock-names = "refclk";
> };
>
> clocks {
> diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
> index a2b9376ec861..f227eff28d3a 100644
> --- a/drivers/tty/serial/bcm63xx_uart.c
> +++ b/drivers/tty/serial/bcm63xx_uart.c
> @@ -841,8 +841,10 @@ static int bcm_uart_probe(struct platform_device *pdev)
> if (!res_irq)
> return -ENODEV;
>
> - clk = pdev->dev.of_node ? of_clk_get(pdev->dev.of_node, 0) :
> - clk_get(&pdev->dev, "refclk");
> + clk = clk_get(&pdev->dev, "refclk");
> + if (IS_ERR(clk) && pdev->dev.of_node)
> + clk = of_clk_get(pdev->dev.of_node, 0);
> +
> if (IS_ERR(clk))
> return -ENODEV;
>
> --
> 2.13.2
>
