Re: [PATCH v2 1/4] crypto: jz4780-rng: Add JZ4780 PRNG devicetree binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On 26 August 2017 at 03:27, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Wed, Aug 23, 2017 at 08:27:04AM +0530, PrasannaKumar Muralidharan wrote:
>> Add devicetree bindings for hardware pseudo random number generator
>> present in Ingenic JZ4780 SoC.
>>
>> Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>
>> ---
>> Changes in v2:
>> * Add "syscon" in CGU node's compatible section
>> * Make RNG child node of CGU.
>>
>>  .../bindings/crypto/ingenic,jz4780-rng.txt           | 20 ++++++++++++++++++++
>
> bindings/rng/ for RNG h/w.

There are two subsystem for dealing with RNG hw. Hw_random subsystem
for true RNG (driver/char/hw_random) and crypto framework for pseudo
RNG (crypto/ and drviers/crypto). This HW is pseudo RNG so I have
placed the dt bindings in bindings/crypto as the driver itself is in
drivers/crypto folder. I am wondering if there is any relation between
driver folder and bindings folder. Can you please explain the folder
relation? Should this be put in bindings/rng or bindings/crypto?

>
>>  1 file changed, 20 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/crypto/ingenic,jz4780-rng.txt
>>
>> diff --git a/Documentation/devicetree/bindings/crypto/ingenic,jz4780-rng.txt b/Documentation/devicetree/bindings/crypto/ingenic,jz4780-rng.txt
>> new file mode 100644
>> index 0000000..a0c18e5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/crypto/ingenic,jz4780-rng.txt
>> @@ -0,0 +1,20 @@
>> +Ingenic jz4780 RNG driver
>> +
>> +Required properties:
>> +- compatible : Should be "ingenic,jz4780-rng"
>> +
>> +Example:
>> +
>> +cgu: jz4780-cgu@10000000 {
>> +     compatible = "ingenic,jz4780-cgu", "syscon";
>> +     reg = <0x10000000 0x100>;
>> +
>> +     clocks = <&ext>, <&rtc>;
>> +     clock-names = "ext", "rtc";
>> +
>> +     #clock-cells = <1>;
>> +
>> +     rng: rng@d8 {
>
> unit-address requires reg property.

The driver uses regmap to access the registers. In this case reg
property is not useful. Is reg property still needed? If not, how
should the node be declared?

>
>> +             compatible = "ingenic,jz480-rng";
>> +     };
>> +};
>> --
>> 2.10.0
>>

Thanks,
PrasannaKumar


[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux