Re: [PATCH 2/3] MIPS: dts: Add VoCore2 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

Thanks for the review.

On 17/08/17 22:36, Rob Herring wrote:
On Tue, Aug 15, 2017 at 05:32:52PM +0100, Harvey Hunt wrote:
The VoCore2 board is a low cost MT7628A based board with 128MB RAM, 16MB
flash and multiple external peripherals.

This initial DTS provides enough support to get to userland and use the USB
port.

Signed-off-by: Harvey Hunt <harvey.hunt@xxxxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-mips@xxxxxxxxxxxxxx
---
  MAINTAINERS                           |  6 ++++++
  arch/mips/boot/dts/ralink/Makefile    |  1 +
  arch/mips/boot/dts/ralink/vocore2.dts | 18 ++++++++++++++++++
  arch/mips/ralink/Kconfig              |  5 +++++
  4 files changed, 30 insertions(+)
  create mode 100644 arch/mips/boot/dts/ralink/vocore2.dts

diff --git a/MAINTAINERS b/MAINTAINERS
index 6f7721d..82dcc6f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14127,6 +14127,12 @@ L:	netdev@xxxxxxxxxxxxxxx
  S:	Maintained
  F:	drivers/net/vmxnet3/
+VOCORE VOCORE2 BOARD
+M:	Harvey Hunt <harveyhuntnexus@xxxxxxxxx>
+L:	linux-mips@xxxxxxxxxxxxxx
+S:	Maintained
+F:	arch/mips/boot/dts/ralink/vocore2.dts
+
  VOLTAGE AND CURRENT REGULATOR FRAMEWORK
  M:	Liam Girdwood <lgirdwood@xxxxxxxxx>
  M:	Mark Brown <broonie@xxxxxxxxxx>
diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile
index 2a72259..a191788 100644
--- a/arch/mips/boot/dts/ralink/Makefile
+++ b/arch/mips/boot/dts/ralink/Makefile
@@ -2,6 +2,7 @@ dtb-$(CONFIG_DTB_RT2880_EVAL)	+= rt2880_eval.dtb
  dtb-$(CONFIG_DTB_RT305X_EVAL)	+= rt3052_eval.dtb
  dtb-$(CONFIG_DTB_RT3883_EVAL)	+= rt3883_eval.dtb
  dtb-$(CONFIG_DTB_MT7620A_EVAL)	+= mt7620a_eval.dtb
+dtb-$(CONFIG_DTB_VOCORE2)		+= vocore2.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) diff --git a/arch/mips/boot/dts/ralink/vocore2.dts b/arch/mips/boot/dts/ralink/vocore2.dts
new file mode 100644
index 0000000..7591340
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/vocore2.dts
@@ -0,0 +1,18 @@
+/dts-v1/;
+
+#include "mt7628a.dtsi"
+
+/ {
+	compatible = "vocore,vocore2", "ralink,mt7628a-soc";

Is vocore,vocore2 documented?

It's not, do you want me to add a file in Documentation/devicetree/bindings/mips?

If so, shall I just create a vocore.txt file or create a "vocore" directory with vocore2.txt in it?

Thanks,

Harvey


+	model = "VoCore2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS2,115200";
+		stdout-path = "serial2:115200";
+	};
+};
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 710b04c..c2b2c2d 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -82,6 +82,11 @@ choice
  		depends on SOC_MT7620
  		select BUILTIN_DTB
+ config DTB_VOCORE2
+		bool "VoCore2"
+		depends on SOC_MT7620
+		select BUILTIN_DTB
+
  endchoice
endif
--
2.7.4






[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux