The binding was not documented before, add the documentation now.
Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
---
.../devicetree/bindings/watchdog/lantiq-wdt.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt b/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt
new file mode 100644
index 000000000000..18d4d8302702
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt
@@ -0,0 +1,24 @@
+Lantiq WTD watchdog binding
+============================
+
+This describes the binding of the Lantiq watchdog driver.
+
+-------------------------------------------------------------------------------
+Required properties:
+- compatible : Should be one of
+ "lantiq,wdt"
+ "lantiq,xrx100-wdt"
+ "lantiq,xrx200-wdt", "lantiq,xrx100-wdt"
+ "lantiq,falcon-wdt"
+- reg : Address of the watchdog block
+- lantiq,rcu : A phandle to the RCU syscon (required for
+ "lantiq,falcon-wdt" and "lantiq,xrx100-wdt")
+
+-------------------------------------------------------------------------------
+Example for the watchdog on the xRX200 SoCs:
+ watchdog@803f0 {
+ compatible = "lantiq,xrx200-wdt", "lantiq,xrx100-wdt";
+ reg = <0x803f0 0x10>;
+
+ lantiq,rcu = <&rcu0>;
+ };
--
2.11.0
