Re: [RESEND][PATCH v5] MIPS: NI 169445 board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 14, 2017 at 12:33:27PM -0500, Nathan Sullivan wrote:
> Support the National Instruments 169445 board.
> 
> Signed-off-by: Nathan Sullivan <nathan.sullivan@xxxxxx>
> ---
> 
> Changes from v4:
>  
> - Address Rob Herring's device tree feedback
> 
>  Documentation/devicetree/bindings/mips/ni.txt   |   7 ++
>  MAINTAINERS                                     |   8 ++
>  arch/mips/boot/dts/Makefile                     |   1 +
>  arch/mips/boot/dts/ni/169445.dts                | 100 ++++++++++++++++++++++++
>  arch/mips/boot/dts/ni/Makefile                  |   7 ++
>  arch/mips/configs/generic/board-ni169445.config |  27 +++++++
>  arch/mips/generic/Kconfig                       |   6 ++
>  arch/mips/generic/vmlinux.its.S                 |  25 ++++++
>  8 files changed, 181 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mips/ni.txt
>  create mode 100644 arch/mips/boot/dts/ni/169445.dts
>  create mode 100644 arch/mips/boot/dts/ni/Makefile
>  create mode 100644 arch/mips/configs/generic/board-ni169445.config
> 
> diff --git a/Documentation/devicetree/bindings/mips/ni.txt b/Documentation/devicetree/bindings/mips/ni.txt
> new file mode 100644
> index 0000000..722bf2d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/ni.txt
> @@ -0,0 +1,7 @@
> +National Instruments MIPS platforms
> +
> +required root node properties:
> +	- compatible: must be "ni,169445"
> +
> +CPU Nodes
> +	- compatible: must be "mti,mips14KEc"
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7d9bd4a..73fa2e0 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9294,6 +9294,14 @@ F:	include/linux/sunrpc/
>  F:	include/uapi/linux/nfs*
>  F:	include/uapi/linux/sunrpc/
>  
> +NI169445 MIPS ARCHITECTURE
> +M:	Nathan Sullivan <nathan.sullivan@xxxxxx>
> +L:	linux-mips@xxxxxxxxxxxxxx
> +S:	Maintained
> +F:	arch/mips/boot/dts/ni/
> +F:	arch/mips/configs/generic/board-ni169445.config
> +F:	Documentation/devicetree/bindings/mips/ni.txt
> +
>  NILFS2 FILESYSTEM
>  M:	Ryusuke Konishi <konishi.ryusuke@xxxxxxxxxxxxx>
>  L:	linux-nilfs@xxxxxxxxxxxxxxx
> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
> index b9db492..27b0f37 100644
> --- a/arch/mips/boot/dts/Makefile
> +++ b/arch/mips/boot/dts/Makefile
> @@ -4,6 +4,7 @@ dts-dirs	+= img
>  dts-dirs	+= ingenic
>  dts-dirs	+= lantiq
>  dts-dirs	+= mti
> +dts-dirs	+= ni
>  dts-dirs	+= netlogic
>  dts-dirs	+= pic32
>  dts-dirs	+= qca
> diff --git a/arch/mips/boot/dts/ni/169445.dts b/arch/mips/boot/dts/ni/169445.dts
> new file mode 100644
> index 0000000..6a20036
> --- /dev/null
> +++ b/arch/mips/boot/dts/ni/169445.dts
> @@ -0,0 +1,100 @@
> +/dts-v1/;
> +
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	compatible = "ni,169445";
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		cpu@0 {
> +			device_type = "cpu";
> +			compatible = "mti,mips14KEc";
> +			clocks = <&baseclk>;
> +			reg = <0>;
> +		};
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x10000000>;
> +	};
> +
> +	baseclk: baseclock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <50000000>;
> +	};
> +
> +	cpu_intc: interrupt-controller {
> +		#address-cells = <0>;
> +		compatible = "mti,cpu-interrupt-controller";
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +	};
> +
> +	ahb@1f300000 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x1f300000 0x80FFF>;
> +
> +		gpio1: gpio@1f300010 {

should be "...@10"

> +			compatible = "ni,169445-nand-gpio";
> +			reg = <0x10 0x4>;
> +			reg-names = "dat";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpio2: gpio@1f300014 {

@14

> +			compatible = "ni,169445-nand-gpio";
> +			reg = <0x14 0x4>;
> +			reg-names = "dat";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			no-output;
> +		};
> +
> +		nand@1f300000 {

@0

and so on. Building the kernel with W=2 will check this.

With that,

Acked-by: Rob Herring <robh@xxxxxxxxxx>

> +			compatible = "gpio-control-nand";
> +			nand-on-flash-bbt;
> +			nand-ecc-mode = "soft_bch";
> +			nand-ecc-step-size = <512>;
> +			nand-ecc-strength = <4>;
> +			reg = <0x0 4>;
> +			gpios = <&gpio2 0 0>, /* rdy */
> +				<&gpio1 1 0>, /* nce */
> +				<&gpio1 2 0>, /* ale */
> +				<&gpio1 3 0>, /* cle */
> +				<&gpio1 4 0>; /* nwp */
> +		};
> +
> +		serial@1f380000 {
> +			compatible = "ns16550a";
> +			reg = <0x80000 0x1000>;
> +			interrupt-parent = <&cpu_intc>;
> +			interrupts = <6>;
> +			clocks = <&baseclk>;
> +			reg-shift = <0>;
> +		};
> +
> +		ethernet@1f340000 {
> +			compatible = "snps,dwmac-4.10a";
> +			interrupt-parent = <&cpu_intc>;
> +			interrupts = <5>;
> +			interrupt-names = "macirq";
> +			reg = <0x40000 0x2000>;
> +			clock-names = "stmmaceth", "pclk";
> +			clocks = <&baseclk>, <&baseclk>;
> +
> +			phy-mode = "rgmii";
> +
> +			fixed-link {
> +				speed = <1000>;
> +				full-duplex;
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/mips/boot/dts/ni/Makefile b/arch/mips/boot/dts/ni/Makefile
> new file mode 100644
> index 0000000..66cfdff
> --- /dev/null
> +++ b/arch/mips/boot/dts/ni/Makefile
> @@ -0,0 +1,7 @@
> +dtb-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= 169445.dtb
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj-					+= dummy.o
> +
> +always					:= $(dtb-y)
> +clean-files				:= *.dtb *.dtb.S
> diff --git a/arch/mips/configs/generic/board-ni169445.config b/arch/mips/configs/generic/board-ni169445.config
> new file mode 100644
> index 0000000..0bae1f8
> --- /dev/null
> +++ b/arch/mips/configs/generic/board-ni169445.config
> @@ -0,0 +1,27 @@
> +CONFIG_FIT_IMAGE_FDT_NI169445=y
> +
> +CONFIG_SERIAL_8250=y
> +CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_OF_PLATFORM=y
> +
> +CONFIG_GPIOLIB=y
> +CONFIG_GPIO_SYSFS=y
> +CONFIG_GPIO_GENERIC_PLATFORM=y
> +
> +CONFIG_MTD=y
> +CONFIG_MTD_BLOCK=y
> +CONFIG_MTD_CMDLINE_PARTS=y
> +
> +CONFIG_MTD_NAND_ECC=y
> +CONFIG_MTD_NAND_ECC_BCH=y
> +CONFIG_MTD_NAND=y
> +CONFIG_MTD_NAND_GPIO=y
> +CONFIG_MTD_NAND_IDS=y
> +
> +CONFIG_MTD_UBI=y
> +CONFIG_MTD_UBI_BLOCK=y
> +
> +CONFIG_NETDEVICES=y
> +CONFIG_STMMAC_ETH=y
> +CONFIG_STMMAC_PLATFORM=y
> +CONFIG_DWMAC_GENERIC=y
> diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
> index a606b3f..fbf0813 100644
> --- a/arch/mips/generic/Kconfig
> +++ b/arch/mips/generic/Kconfig
> @@ -16,4 +16,10 @@ config LEGACY_BOARD_SEAD3
>  	  Enable this to include support for booting on MIPS SEAD-3 FPGA-based
>  	  development boards, which boot using a legacy boot protocol.
>  
> +config FIT_IMAGE_FDT_NI169445
> +	bool "Include FDT for NI 169445"
> +	help
> +	  Enable this to include the FDT for the 169445 platform from
> +	  National Instruments in the FIT kernel image.
> +
>  endif
> diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
> index f67fbf1..de851f7 100644
> --- a/arch/mips/generic/vmlinux.its.S
> +++ b/arch/mips/generic/vmlinux.its.S
> @@ -29,3 +29,28 @@
>  		};
>  	};
>  };
> +
> +#ifdef CONFIG_FIT_IMAGE_FDT_NI169445
> +/ {
> +	images {
> +		fdt@ni169445 {
> +			description = "NI 169445 device tree";
> +			data = /incbin/("boot/dts/ni/169445.dtb");
> +			type = "flat_dt";
> +			arch = "mips";
> +			compression = "none";
> +			hash@0 {
> +				algo = "sha1";
> +			};
> +		};
> +	};
> +
> +	configurations {
> +		conf@ni169445 {
> +			description = "NI 169445 Linux Kernel";
> +			kernel = "kernel@0";
> +			fdt = "fdt@ni169445";
> +		};
> +	};
> +};
> +#endif
> -- 
> 2.1.4
> 




[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux