On Mon, Jul 03, 2017 at 12:40:43AM +0200, Hauke Mehrtens wrote: > Instead of hacking the configuration of the FPI bus into the arch code > add an own bus driver for this internal bus. The FPI bus is the main > bus of the SoC. This bus driver makes sure the bus is configured > correctly before the child drivers are getting initialized. This driver > will probably also be used on different SoC later. > > Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> > --- > .../devicetree/bindings/mips/lantiq/fpi-bus.txt | 31 ++++++++ Acked-by: Rob Herring <robh@xxxxxxxxxx> > MAINTAINERS | 1 + > arch/mips/lantiq/xway/reset.c | 4 - > arch/mips/lantiq/xway/sysctrl.c | 41 ---------- > drivers/soc/Makefile | 1 + > drivers/soc/lantiq/Makefile | 1 + > drivers/soc/lantiq/fpi-bus.c | 87 ++++++++++++++++++++++ > 7 files changed, 121 insertions(+), 45 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mips/lantiq/fpi-bus.txt > create mode 100644 drivers/soc/lantiq/Makefile > create mode 100644 drivers/soc/lantiq/fpi-bus.c
