[PATCH 00/15] Ingenic JZ4770 and GCW Zero patchset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

To: Ralf Baechle <ralf@xxxxxxxxxxxxxx>, Michael Turquette <mturquette@xxxxxxxxxxxx>, Stephen Boyd <sboyd@xxxxxxxxxxxxxx>, Rob Herring <robh+dt@xxxxxxxxxx>
Subject: [PATCH 00/15] Ingenic JZ4770 and GCW Zero patchset
From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Date: Wed, 7 Jun 2017 22:04:24 +0200
Cc: Paul Burton <paul.burton@xxxxxxxxxx>, Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>, devicetree@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, linux-mips@xxxxxxxxxxxxxx, linux-clk@xxxxxxxxxxxxxxx

Hi,

This set of 15 commits brings basic support of the JZ4770 SoC from
Ingenic.

The support is currently minimal, but enough to boot to a initramfs
userspace from the serial console.

The last patch introduces support for one JZ4770 based device, the
open-source game console GCW Zero, successfully kickstarted in 2012.

Regards,
-Paul

Follow-Ups:
- [PATCH 06/15] serial: 8250_ingenic: Parse earlycon options
  - From: Paul Cercueil
- [PATCH 01/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider
  - From: Paul Cercueil
- [PATCH 15/15] MIPS: ingenic: Initial GCW Zero support
  - From: Paul Cercueil
- [PATCH 14/15] devicetree/bindings: Add GCW vendor prefix
  - From: Paul Cercueil
- [PATCH 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers
  - From: Paul Cercueil
- [PATCH 12/15] MIPS: JZ4770: Work around config2 misreporting associativity
  - From: Paul Cercueil
- [PATCH 11/15] MIPS: ingenic: Initial JZ4770 support
  - From: Paul Cercueil
- [PATCH 10/15] MIPS: ingenic: Add machine info for supported boards
  - From: Paul Cercueil
- [PATCH 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs
  - From: Paul Cercueil
- [PATCH 08/15] MIPS: ingenic: Use common cmdline handling code
  - From: Paul Cercueil
- [PATCH 05/15] serial: 8250_ingenic: Add support for the JZ4770 SoC
  - From: Paul Cercueil
- [PATCH 07/15] MIPS: Setup boot_command_line before plat_mem_setup
  - From: Paul Cercueil
- [PATCH 04/15] clk: Add Ingenic jz4770 CGU driver
  - From: Paul Cercueil
- [PATCH 03/15] clk: ingenic: Add code to enable/disable PLLs
  - From: Paul Cercueil
- [PATCH 02/15] clk: ingenic: support PLLs with no bypass bit
  - From: Paul Cercueil

Prev by Date: Re: [PATCH 5/7] sh: Use lib/ashldi3,ashrdi3,lshrdi3}.c
Next by Date: [PATCH 02/15] clk: ingenic: support PLLs with no bypass bit
Previous by thread: [PATCH 02/16] mips: sgi-ip22: ecard: use dev_groups and not dev_attrs for bus_type
Next by thread: [PATCH 02/15] clk: ingenic: support PLLs with no bypass bit
Index(es):
- Date
- Thread

[Index of Archives] [Linux MIPS Home] [LKML Archive] [Linux ARM Kernel] [Linux ARM] [Linux] [Git] [Yosemite News] [Linux SCSI] [Linux Hams]