On a Broadcom BCM91250a MIPS system I can reliably trigger NFS corruption on the first file read. To demonstrate, I downloaded five identical copies of the gcc-5.4.0 source tarball. On the NFS server, they hash to the same value: server distfiles # md5sum gcc-5.4.0.tar.bz2* 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2.1 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2.2 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2.3 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2.4 On the MIPS system (the NFS client): bcm91250a-le distfiles # md5sum gcc-5.4.0.tar.bz2.2 35346975989954df8a8db2b034da610d gcc-5.4.0.tar.bz2.2 bcm91250a-le distfiles # md5sum gcc-5.4.0.tar.bz2* 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2.1 35346975989954df8a8db2b034da610d gcc-5.4.0.tar.bz2.2 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2.3 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2.4 The first file read will contain some corruption, and it is persistent until... bcm91250a-le distfiles # echo 1 > /proc/sys/vm/drop_caches bcm91250a-le distfiles # md5sum gcc-5.4.0.tar.bz2* 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2.1 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2.2 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2.3 4c626ac2a83ef30dfb9260e6f59c2b30 gcc-5.4.0.tar.bz2.4 the caches are dropped, at which point it reads back properly. Note that the corruption is different across reboots, both in the size of the corruption and the location. I saw 1900~ and 1400~ byte sequences corrupted on separate occasions, which don't correspond to the system's 16kB page size. I've tested kernels from v3.19 to 4.11-rc1+ (master branch from today). All exhibit this behavior with differing frequencies. Earlier kernels seem to reproduce the issue less often, while more recent kernels reliably exhibit the problem every boot. How can I further debug this?
