This config option never really worked, and has bit-rotted to the
point of being completely useless. Remove it completely.
Signed-off-by: David Daney <david.daney@xxxxxxxxxx>
---
arch/mips/cavium-octeon/Kconfig | 9 ---------
arch/mips/cavium-octeon/Platform | 4 ----
arch/mips/cavium-octeon/setup.c | 12 +-----------
3 files changed, 1 insertion(+), 24 deletions(-)
diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index c370426..5c0b562 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -25,15 +25,6 @@ endif # CPU_CAVIUM_OCTEON
if CAVIUM_OCTEON_SOC
-config CAVIUM_OCTEON_2ND_KERNEL
- bool "Build the kernel to be used as a 2nd kernel on the same chip"
- default "n"
- help
- This option configures this kernel to be linked at a different
- address and use the 2nd uart for output. This allows a kernel built
- with this option to be run at the same time as one built without this
- option.
-
config CAVIUM_OCTEON_LOCK_L2
bool "Lock often used kernel code in the L2"
default "y"
diff --git a/arch/mips/cavium-octeon/Platform b/arch/mips/cavium-octeon/Platform
index 8a301cb..45be853 100644
--- a/arch/mips/cavium-octeon/Platform
+++ b/arch/mips/cavium-octeon/Platform
@@ -4,8 +4,4 @@
platform-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon/
cflags-$(CONFIG_CAVIUM_OCTEON_SOC) += \
-I$(srctree)/arch/mips/include/asm/mach-cavium-octeon
-ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
-load-$(CONFIG_CAVIUM_OCTEON_SOC) += 0xffffffff84100000
-else
load-$(CONFIG_CAVIUM_OCTEON_SOC) += 0xffffffff81100000
-endif
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 9a2db1c..33fe437 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -374,14 +374,8 @@ void octeon_write_lcd(const char *s)
*/
int octeon_get_boot_uart(void)
{
- int uart;
-#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
- uart = 1;
-#else
- uart = (octeon_boot_desc_ptr->flags & OCTEON_BL_FLAG_CONSOLE_UART1) ?
+ return (octeon_boot_desc_ptr->flags & OCTEON_BL_FLAG_CONSOLE_UART1) ?
1 : 0;
-#endif
- return uart;
}
/**
@@ -901,14 +895,10 @@ void __init prom_init(void)
}
if (strstr(arcs_cmdline, "console=") == NULL) {
-#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
- strcat(arcs_cmdline, " console=ttyS0,115200");
-#else
if (octeon_uart == 1)
strcat(arcs_cmdline, " console=ttyS1,115200");
else
strcat(arcs_cmdline, " console=ttyS0,115200");
-#endif
}
mips_hpt_frequency = octeon_get_clock_rate();
--
2.9.3
