Re: [PATCH v2 1/4] MIPS: BMIPS: Update defconfig

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06-02-17, 13:51, Markus Mayer wrote:
> From: Markus Mayer <mmayer@xxxxxxxxxxxx>
> 
> Ran "make savedefconfig" to bring bmips_stb_defconfig up to date.
> 
> Signed-off-by: Markus Mayer <mmayer@xxxxxxxxxxxx>
> ---
>  arch/mips/configs/bmips_stb_defconfig | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/mips/configs/bmips_stb_defconfig b/arch/mips/configs/bmips_stb_defconfig
> index 4eb5d6e..3be15cb 100644
> --- a/arch/mips/configs/bmips_stb_defconfig
> +++ b/arch/mips/configs/bmips_stb_defconfig
> @@ -9,7 +9,6 @@ CONFIG_MIPS_O32_FP64_SUPPORT=y
>  # CONFIG_SWAP is not set
>  CONFIG_NO_HZ=y
>  CONFIG_BLK_DEV_INITRD=y
> -CONFIG_RD_GZIP=y
>  CONFIG_EXPERT=y
>  # CONFIG_VM_EVENT_COUNTERS is not set
>  # CONFIG_SLUB_DEBUG is not set
> @@ -24,7 +23,6 @@ CONFIG_INET=y
>  # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
>  # CONFIG_INET_XFRM_MODE_TUNNEL is not set
>  # CONFIG_INET_XFRM_MODE_BEET is not set
> -# CONFIG_INET_LRO is not set
>  # CONFIG_INET_DIAG is not set
>  CONFIG_CFG80211=y
>  CONFIG_NL80211_TESTMODE=y
> @@ -34,8 +32,6 @@ CONFIG_DEVTMPFS=y
>  CONFIG_DEVTMPFS_MOUNT=y
>  # CONFIG_STANDALONE is not set
>  # CONFIG_PREVENT_FIRMWARE_BUILD is not set
> -CONFIG_PRINTK_TIME=y
> -CONFIG_BRCMSTB_GISB_ARB=y
>  CONFIG_MTD=y
>  CONFIG_MTD_CFI=y
>  CONFIG_MTD_CFI_INTELEXT=y
> @@ -51,16 +47,15 @@ CONFIG_USB_USBNET=y
>  # CONFIG_INPUT is not set
>  # CONFIG_SERIO is not set
>  # CONFIG_VT is not set
> -# CONFIG_DEVKMEM is not set
>  CONFIG_SERIAL_8250=y
>  # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
>  CONFIG_SERIAL_8250_CONSOLE=y
>  CONFIG_SERIAL_OF_PLATFORM=y
>  # CONFIG_HW_RANDOM is not set
> -CONFIG_POWER_SUPPLY=y
>  CONFIG_POWER_RESET=y
>  CONFIG_POWER_RESET_BRCMSTB=y
>  CONFIG_POWER_RESET_SYSCON=y
> +CONFIG_POWER_SUPPLY=y
>  # CONFIG_HWMON is not set
>  CONFIG_USB=y
>  CONFIG_USB_EHCI_HCD=y
> @@ -82,6 +77,7 @@ CONFIG_CIFS=y
>  CONFIG_NLS_CODEPAGE_437=y
>  CONFIG_NLS_ASCII=y
>  CONFIG_NLS_ISO8859_1=y
> +CONFIG_PRINTK_TIME=y
>  CONFIG_DEBUG_FS=y
>  CONFIG_MAGIC_SYSRQ=y
>  CONFIG_CMDLINE_BOOL=y

This is what happens when people don't update defconfigs properly :)

Reviewed-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>

-- 
viresh




[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux