Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on
the pins being properly configured before the driver probes.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
drivers/mmc/host/jz4740_mmc.c | 45 +++++--------------------------------------
1 file changed, 5 insertions(+), 40 deletions(-)
v2: Set pin sleep/default state in suspend/resume callbacks
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 819ad32964fc..b5fec5b7ee7b 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -20,14 +20,13 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/scatterlist.h>
#include <linux/clk.h>
#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <asm/mach-jz4740/gpio.h>
#include <asm/cacheflush.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
@@ -906,15 +905,6 @@ static const struct mmc_host_ops jz4740_mmc_ops = {
.enable_sdio_irq = jz4740_mmc_enable_sdio_irq,
};
-static const struct jz_gpio_bulk_request jz4740_mmc_pins[] = {
- JZ_GPIO_BULK_PIN(MSC_CMD),
- JZ_GPIO_BULK_PIN(MSC_CLK),
- JZ_GPIO_BULK_PIN(MSC_DATA0),
- JZ_GPIO_BULK_PIN(MSC_DATA1),
- JZ_GPIO_BULK_PIN(MSC_DATA2),
- JZ_GPIO_BULK_PIN(MSC_DATA3),
-};
-
static int jz4740_mmc_request_gpio(struct device *dev, int gpio,
const char *name, bool output, int value)
{
@@ -978,15 +968,6 @@ static void jz4740_mmc_free_gpios(struct platform_device *pdev)
gpio_free(pdata->gpio_power);
}
-static inline size_t jz4740_mmc_num_pins(struct jz4740_mmc_host *host)
-{
- size_t num_pins = ARRAY_SIZE(jz4740_mmc_pins);
- if (host->pdata && host->pdata->data_1bit)
- num_pins -= 3;
-
- return num_pins;
-}
-
static int jz4740_mmc_probe(struct platform_device* pdev)
{
int ret;
@@ -1027,15 +1008,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
goto err_free_host;
}
- ret = jz_gpio_bulk_request(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
- if (ret) {
- dev_err(&pdev->dev, "Failed to request mmc pins: %d\n", ret);
- goto err_free_host;
- }
-
ret = jz4740_mmc_request_gpios(mmc, pdev);
if (ret)
- goto err_gpio_bulk_free;
+ goto err_release_dma;
mmc->ops = &jz4740_mmc_ops;
mmc->f_min = JZ_MMC_CLK_RATE / 128;
@@ -1091,10 +1066,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
free_irq(host->irq, host);
err_free_gpios:
jz4740_mmc_free_gpios(pdev);
-err_gpio_bulk_free:
+err_release_dma:
if (host->use_dma)
jz4740_mmc_release_dma_channels(host);
- jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
err_free_host:
mmc_free_host(mmc);
@@ -1114,7 +1088,6 @@ static int jz4740_mmc_remove(struct platform_device *pdev)
free_irq(host->irq, host);
jz4740_mmc_free_gpios(pdev);
- jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
if (host->use_dma)
jz4740_mmc_release_dma_channels(host);
@@ -1128,20 +1101,12 @@ static int jz4740_mmc_remove(struct platform_device *pdev)
static int jz4740_mmc_suspend(struct device *dev)
{
- struct jz4740_mmc_host *host = dev_get_drvdata(dev);
-
- jz_gpio_bulk_suspend(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
-
- return 0;
+ return pinctrl_pm_select_sleep_state(dev);
}
static int jz4740_mmc_resume(struct device *dev)
{
- struct jz4740_mmc_host *host = dev_get_drvdata(dev);
-
- jz_gpio_bulk_resume(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
-
- return 0;
+ return pinctrl_pm_select_default_state(dev);
}
static SIMPLE_DEV_PM_OPS(jz4740_mmc_pm_ops, jz4740_mmc_suspend,
--
2.11.0
