This patch enables KASLR for OCTEON systems. The SMP startup code is
such that the secondaries monitor the volatile variable
'octeon_processor_relocated_kernel_entry' for any non-zero value.
The 'plat_post_relocation hook' is used to set that value to the
kernel entry point of the relocated kernel. The secondary CPUs will
then jusmp to the new kernel, perform their initialization again
and begin waiting for the boot CPU to start them via the relocated
loop 'octeon_spin_wait_boot'. Inspired by Steven's code from Cavium.
Signed-off-by: Matt Redfearn <matt.redfearn@xxxxxxxxxx>
Signed-off-by: Steven J. Hill <Steven.Hill@xxxxxxxxxx>
---
Changes in v2:
- Add missing code to set 'octeon_processor_relocated_kernel_entry'
which was forgotten. Mental note, don't submit patches at 3a.m.
---
arch/mips/Kconfig | 3 ++-
arch/mips/cavium-octeon/smp.c | 20 ++++++++++++++++++--
.../asm/mach-cavium-octeon/kernel-entry-init.h | 15 ++++++++++++++-
3 files changed, 34 insertions(+), 4 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b3c5bde..65d7e20 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -909,6 +909,7 @@ config CAVIUM_OCTEON_SOC
select NR_CPUS_DEFAULT_16
select BUILTIN_DTB
select MTD_COMPLEX_MAPPINGS
+ select SYS_SUPPORTS_RELOCATABLE
help
This option supports all of the Octeon reference boards from Cavium
Networks. It builds a kernel that dynamically determines the Octeon
@@ -2570,7 +2571,7 @@ config SYS_SUPPORTS_NUMA
config RELOCATABLE
bool "Relocatable kernel"
- depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6)
+ depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC)
help
This builds a kernel image that retains relocation information
so it can be loaded someplace besides the default 1MB.
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 256fe6f..889c3f4 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -24,12 +24,17 @@
volatile unsigned long octeon_processor_boot = 0xff;
volatile unsigned long octeon_processor_sp;
volatile unsigned long octeon_processor_gp;
+#ifdef CONFIG_RELOCATABLE
+volatile unsigned long octeon_processor_relocated_kernel_entry;
+#endif /* CONFIG_RELOCATABLE */
#ifdef CONFIG_HOTPLUG_CPU
uint64_t octeon_bootloader_entry_addr;
EXPORT_SYMBOL(octeon_bootloader_entry_addr);
#endif
+extern void kernel_entry(unsigned long arg1, ...);
+
static void octeon_icache_flush(void)
{
asm volatile ("synci 0($0)\n");
@@ -180,6 +185,19 @@ static void __init octeon_smp_setup(void)
octeon_smp_hotplug_setup();
}
+
+#ifdef CONFIG_RELOCATABLE
+int plat_post_relocation(long offset)
+{
+ unsigned long entry = (unsigned long)kernel_entry;
+
+ /* Send secondaries into relocated kernel */
+ octeon_processor_relocated_kernel_entry = entry + offset;
+
+ return 0;
+}
+#endif /* CONFIG_RELOCATABLE */
+
/**
* Firmware CPU startup hook
*
@@ -333,8 +351,6 @@ void play_dead(void)
;
}
-extern void kernel_entry(unsigned long arg1, ...);
-
static void start_after_reset(void)
{
kernel_entry(0, 0, 0); /* set a2 = 0 for secondary core */
diff --git a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
index c4873e8..f69611c 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
@@ -99,9 +99,22 @@
# to begin
#
+octeon_spin_wait_boot:
+#ifdef CONFIG_RELOCATABLE
+ PTR_LA t0, octeon_processor_relocated_kernel_entry
+ LONG_L t0, (t0)
+ beq zero, t0, 1f
+
+ /* If kernel has been relocated, jump to it's new entry point */
+ move a0, zero
+ move a1, zero
+ move a2, zero
+ jr t0
+1:
+#endif /* CONFIG_RELOCATABLE */
+
# This is the variable where the next core to boot os stored
PTR_LA t0, octeon_processor_boot
-octeon_spin_wait_boot:
# Get the core id of the next to be booted
LONG_L t1, (t0)
# Keep looping if it isn't me
--
1.9.1
