On Mon, Dec 05, 2016 at 11:00:53PM +0800, Yang Ling wrote:
> Add watchdog timer specific driver for Loongson1 SoC.
>
> Signed-off-by: Yang Ling <gnaygnil@xxxxxxxxx>
>
> ---
> V2.4:
> Set DEFAULT_HEARTBEAT to 0.
> V2.3:
> Set DEFAULT_HEARTBEAT value to ls1x_wdt->timeout.
> V2.2:
> Remove the wide character.
> Check the return value for clk_get_rate().
> V2.1 from Kelvin Cheung:
> Use max_hw_heartbeat_ms instead of max_timeout.
> V2.0:
> Increase the value of the default heartbeat.
> Modify the setup process for register.
> Order include files and Makefile alphabetically.
> V1.1:
> Add a little debugging information.
> ---
> drivers/watchdog/Kconfig | 7 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/loongson1_wdt.c | 170 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 178 insertions(+)
> create mode 100644 drivers/watchdog/loongson1_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index fdd3228..c5b9c6e 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1513,6 +1513,13 @@ config LANTIQ_WDT
> help
> Hardware driver for the Lantiq SoC Watchdog Timer.
>
> +config LOONGSON1_WDT
> + tristate "Loongson1 SoC hardware watchdog"
> + depends on MACH_LOONGSON32
> + select WATCHDOG_CORE
> + help
> + Hardware driver for the Loongson1 SoC Watchdog Timer.
> +
> config RALINK_WDT
> tristate "Ralink SoC watchdog"
> select WATCHDOG_CORE
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index caa9f4a..0c3d35e 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -163,6 +163,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
> obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
> octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
> obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
> +obj-$(CONFIG_LOONGSON1_WDT) += loongson1_wdt.o
> obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
> obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
> obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
> diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c
> new file mode 100644
> index 0000000..1c75bda
> --- /dev/null
> +++ b/drivers/watchdog/loongson1_wdt.c
> @@ -0,0 +1,170 @@
> +/*
> + * Copyright (c) 2016 Yang Ling <gnaygnil@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/watchdog.h>
> +#include <loongson1.h>
> +
> +#define DEFAULT_HEARTBEAT 0
> +
This is not what I said or meant, and quite pointless.
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0444);
> +
> +static unsigned int heartbeat = DEFAULT_HEARTBEAT;
What I said and meant was that this variable should be initialized with 0,
ie just be declared as
static unsigned int heartbeat;
Guenter
> +module_param(heartbeat, uint, 0444);
> +
> +struct ls1x_wdt_drvdata {
> + void __iomem *base;
> + struct clk *clk;
> + unsigned long clk_rate;
> + struct watchdog_device wdt;
> +};
> +
> +static int ls1x_wdt_ping(struct watchdog_device *wdt_dev)
> +{
> + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> +
> + writel(0x1, drvdata->base + WDT_SET);
> +
> + return 0;
> +}
> +
> +static int ls1x_wdt_set_timeout(struct watchdog_device *wdt_dev,
> + unsigned int timeout)
> +{
> + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> + unsigned int max_hw_heartbeat = wdt_dev->max_hw_heartbeat_ms / 1000;
> + unsigned int counts;
> +
> + wdt_dev->timeout = timeout;
> +
> + counts = drvdata->clk_rate * min(timeout, max_hw_heartbeat);
> + writel(counts, drvdata->base + WDT_TIMER);
> +
> + return 0;
> +}
> +
> +static int ls1x_wdt_start(struct watchdog_device *wdt_dev)
> +{
> + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> +
> + writel(0x1, drvdata->base + WDT_EN);
> +
> + return 0;
> +}
> +
> +static int ls1x_wdt_stop(struct watchdog_device *wdt_dev)
> +{
> + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> +
> + writel(0x0, drvdata->base + WDT_EN);
> +
> + return 0;
> +}
> +
> +static const struct watchdog_info ls1x_wdt_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "Loongson1 Watchdog",
> +};
> +
> +static const struct watchdog_ops ls1x_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = ls1x_wdt_start,
> + .stop = ls1x_wdt_stop,
> + .ping = ls1x_wdt_ping,
> + .set_timeout = ls1x_wdt_set_timeout,
> +};
> +
> +static int ls1x_wdt_probe(struct platform_device *pdev)
> +{
> + struct ls1x_wdt_drvdata *drvdata;
> + struct watchdog_device *ls1x_wdt;
> + unsigned long clk_rate;
> + struct resource *res;
> + int err;
> +
> + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
> + if (!drvdata)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + drvdata->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(drvdata->base))
> + return PTR_ERR(drvdata->base);
> +
> + drvdata->clk = devm_clk_get(&pdev->dev, pdev->name);
> + if (IS_ERR(drvdata->clk))
> + return PTR_ERR(drvdata->clk);
> +
> + err = clk_prepare_enable(drvdata->clk);
> + if (err) {
> + dev_err(&pdev->dev, "clk enable failed\n");
> + return err;
> + }
> +
> + clk_rate = clk_get_rate(drvdata->clk);
> + if (!clk_rate) {
> + err = -EINVAL;
> + goto err0;
> + }
> + drvdata->clk_rate = clk_rate;
> +
> + ls1x_wdt = &drvdata->wdt;
> + ls1x_wdt->info = &ls1x_wdt_info;
> + ls1x_wdt->ops = &ls1x_wdt_ops;
> + ls1x_wdt->timeout = DEFAULT_HEARTBEAT;
> + ls1x_wdt->min_timeout = 1;
> + ls1x_wdt->max_hw_heartbeat_ms = U32_MAX / clk_rate * 1000;
> + ls1x_wdt->parent = &pdev->dev;
> +
> + watchdog_init_timeout(ls1x_wdt, heartbeat, &pdev->dev);
> + watchdog_set_nowayout(ls1x_wdt, nowayout);
> + watchdog_set_drvdata(ls1x_wdt, drvdata);
> +
> + err = watchdog_register_device(&drvdata->wdt);
> + if (err) {
> + dev_err(&pdev->dev, "failed to register watchdog device\n");
> + goto err0;
> + }
> +
> + platform_set_drvdata(pdev, drvdata);
> +
> + dev_info(&pdev->dev, "Loongson1 Watchdog driver registered\n");
> +
> + return 0;
> +err0:
> + clk_disable_unprepare(drvdata->clk);
> + return err;
> +}
> +
> +static int ls1x_wdt_remove(struct platform_device *pdev)
> +{
> + struct ls1x_wdt_drvdata *drvdata = platform_get_drvdata(pdev);
> +
> + watchdog_unregister_device(&drvdata->wdt);
> + clk_disable_unprepare(drvdata->clk);
> +
> + return 0;
> +}
> +
> +static struct platform_driver ls1x_wdt_driver = {
> + .probe = ls1x_wdt_probe,
> + .remove = ls1x_wdt_remove,
> + .driver = {
> + .name = "ls1x-wdt",
> + },
> +};
> +
> +module_platform_driver(ls1x_wdt_driver);
> +
> +MODULE_AUTHOR("Yang Ling <gnaygnil@xxxxxxxxx>");
> +MODULE_DESCRIPTION("Loongson1 Watchdog Driver");
> +MODULE_LICENSE("GPL");
> --
> 1.9.1
>
