On Wed, Nov 09, 2016 at 02:07:58PM +0000, Paul Burton wrote:
> On Wednesday, 9 November 2016 14:41:03 GMT Jan Glauber wrote:
> > Hi Paul,
> >
> > I think we should revert commit "70121f7 i2c: octeon: thunderx: Limit
> > register access retries". With debugging enabled I'm getting:
> >
> > <snip>
> >
> > This is not caused by the usleep inside the wait_event but by
> > readq_poll_timeout(). Could you try if it works for you if you only revert
> > this patch?
> >
> > Thanks,
> > Jan
>
> Hi Jan,
>
> If I drop both my patches & just revert 70121f7f3725 ("i2c: octeon: thunderx:
> Limit register access retries") sadly it doesn't fix my system. A boot of a
> cavium_octeon_defconfig kernel with initcall_debug ends with:
>
> calling octeon_mgmt_mod_init+0x0/0x28 @ 1
> initcall octeon_mgmt_mod_init+0x0/0x28 returned 0 after 67 usecs
> calling ds1307_driver_init+0x0/0x10 @ 1
> initcall ds1307_driver_init+0x0/0x10 returned 0 after 19 usecs
> calling octeon_i2c_driver_init+0x0/0x10 @ 1
> ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> ata1.00: ATA-9: SanDisk SDSSDA240G, Z22000RL, max UDMA/133
> ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
> ata1.00: configured for UDMA/133
> scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDA24 00RL PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
> DPO or FUA
> sda: sda1 sda2 sda3 sda4
> sd 0:0:0:0: [sda] Attached SCSI disk
> ata2: SATA link down (SStatus 0 SControl 300)
> random: crng init done
>
> As you can see octeon_i2c_driver_init never returns. Are you able to test on
> one of your MIPS-based systems?
CC'ing Steven who might be able to test on MIPS.
> Thanks,
> Paul
