IRQs from peripherals such as i2c/uart/ethernet come via
the AXI Interrupt controller.
Select it in Kconfig for xilfpga and add the DT node
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@xxxxxxxxxx>
---
V4 -> V5
Rebase to v4.9-rc1
Renamed XILINX_AXI_INTC to XILINX_INTC
V3 -> V4
No change
V2 -> V3
No change
V1 -> V2
Renamed select XILINX_INTC to select XILINX_AXI_INTC
---
arch/mips/Kconfig | 1 +
arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 12 ++++++++++++
2 files changed, 13 insertions(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b3c5bde..3d681c6 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -478,6 +478,7 @@ config MACH_XILFPGA
select SYS_SUPPORTS_ZBOOT_UART16550
select USE_OF
select USE_GENERIC_EARLY_PRINTK_8250
+ select XILINX_INTC
help
This enables support for the IMG University Program MIPSfpga platform.
diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
index 48d2112..8db660b 100644
--- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
+++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
@@ -17,6 +17,18 @@
compatible = "mti,cpu-interrupt-controller";
};
+ axi_intc: interrupt-controller@10200000 {
+ #interrupt-cells = <1>;
+ compatible = "xlnx,xps-intc-1.00.a";
+ interrupt-controller;
+ reg = <0x10200000 0x10000>;
+ xlnx,kind-of-intr = <0x0>;
+ xlnx,num-intr-inputs = <0x6>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+ };
+
axi_gpio: gpio@10600000 {
#gpio-cells = <1>;
compatible = "xlnx,xps-gpio-1.00.a";
--
1.9.1
