On Tue, 4 Oct 2016 12:11:11 +0200 Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote: > On 10/04/2016 12:09 PM, Yegor Yefremov wrote: > > Hi Neil, > > > > On Tue, Oct 4, 2016 at 11:40 AM, Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote: > >> On 10/04/2016 11:09 AM, Alban wrote: > >>> On Mon, 3 Oct 2016 17:35:31 +0200 > >>> Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote: > >>> > >>>> The HAPROXY Aloha pocket board is a Load Balancer demo board based on the > >>>> Atheros AR9331 SoC with 64Mbytes DDR and 16Mbytes on-board SPI Flash. > >>>> > >>>> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> > >>> > >>> Please use device tree instead of adding another board file. > >>> > >>> Alban > >>> > >> > >> Hi Alban, > >> > >> I'm quite surprised since it seems no device tree support is available for ath79, > >> I would really like to have device tree for this board, but this is only a copy/paste of > >> the mach-ap121 with button/leds gpio differences. > >> > >> Could it be possible to merge it ? I would be happy to support this board once device tree > >> support is landed on the mips tree ! > > > > Take a look at these DTS files from the current Linux tree: > > > > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/mips/boot/dts/qca/ar9331_dpt_module.dts > > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts > > > > etc. > > > > Regards, > > Yegor > > > > My bad, the qca naming is really disturbing. > > I will push a dts instead. Please note that currently some led's names in device tree files are wrong (e.g. dragino2 device tree https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts . My bad! I have just copied led's names from OpenWRT platform files). Please see the 'LED Device Naming' chapter for correct led naming scheme: http://lxr.free-electrons.com/source/Documentation/leds/leds-class.txt#L41 -- Best regards, Antony Pavlov
