The MIPS remote processor driver allows non-Linux firmware to take control of and execute on one of the systems VPEs. The CPU must be offlined from Linux first. A sysfs interface is created which allows firmware to be loaded and changed at runtime. A full description is available at [1]. An example firmware that can be used with this driver is available at [2]. This is useful to allow running bare metal code, or an RTOS, on one or more CPUs while allowing Linux to continue running on those remaining. The remote processor framework allows for firmwares to provide any virtio device for communication between the firmware running on the remote VP and Linux. For example [1] demonstrates a simple firmware which provides a virtual serial port. Any string sent to the port is case inverted and returned. This is conceptually similar to the VPE loader functionality, but is more standard as it fits into the remoteproc subsystem. The first patches in this series lay the groundwork for the driver before it is added. The last series deprecates the VPE loader. This functionality is supported on: - MIPS32r2 devices implementing the MIPS MT ASE for multithreading, such as interAptiv. - MIPS32r6 devices implementing VPs, such as I6400. Limitations: - The remoteproc core supports only 32bit ELFs. Therefore it is only possible to run 32bit firmware on the remote processor. Also, for virtio communication, pointers are passed from the kernel to firmware. There can be no mismatch in pointer sizes between the kernel and firmware, so this limits the host kernel to 32bit as well. The functionality has been tested on the Ci40 board which has a 2 core 2 thread interAptiv. This series is based on v4.8-rc6 Depends on James Hogan's ebase series: MIPS: traps: 64bit kernels should read CP0_EBase 64bit MIPS: traps: Convert ebase to KSeg0 MIPS: traps: Ensure full EBase is written Without these patches, if firmware modifies ebase to allow handling exceptions / interrupts, then when the VPE is returned to Linux the kernel exception handlers won't be reinstated properly. [1] http://wiki.prplfoundation.org/w/images/d/df/MIPS_OS_Remote_Processor_Driver_Whitepaper_1.0.9.pdf [2] https://github.com/MIPS/mips-rproc-example Changes in v2: Add dependence on additional patches to mips-gic in commit log Incorporate changes from Marc Zynger's review: - Remove CONTEXT_SAVING define. - Make saved local state a per-cpu variable - Make gic_save_* static functions when enabled, and do { } while(0) otherwise Lisa Parratt (1): MIPS: CPS: Add VP(E) stealing Matt Redfearn (5): irqchip: mips-gic: Add context saving for MIPS_REMOTEPROC MIPS: tlb-r4k: If there are wired entries, don't use TLBINVF MIPS: smp.c: Introduce mechanism for freeing and allocating IPIs remoteproc/MIPS: Add a remoteproc driver for MIPS MIPS: Deprecate VPE Loader Documentation/ABI/testing/sysfs-class-mips-rproc | 24 + arch/mips/Kconfig | 12 +- arch/mips/include/asm/smp-cps.h | 8 + arch/mips/include/asm/smp.h | 15 + arch/mips/kernel/smp-cps.c | 162 +++++- arch/mips/kernel/smp.c | 73 ++- arch/mips/mm/tlb-r4k.c | 7 +- drivers/irqchip/irq-mips-gic.c | 217 +++++++- drivers/remoteproc/Kconfig | 11 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/mips_remoteproc.c | 651 +++++++++++++++++++++++ 11 files changed, 1156 insertions(+), 25 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-class-mips-rproc create mode 100644 drivers/remoteproc/mips_remoteproc.c -- 2.7.4
