Replace the custom minimal clock implementation for Toshiba TXx9 by a
basic implementation using the Common Clock Framework.
The only clocks that are provided are those needed by TXx9-specific
drivers ("imbus" and "spi" (TX4938 only)), and their common parent
clock "gbus". Other clocks can be added when needed.
Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
---
Tested on RBTX4927.
v2:
- Protect the TX4938_REV_PCODE() check by #ifdef CONFIG_CPU_TX49XX,
- Use new clk_hw-centric clock registration API.
---
arch/mips/txx9/Kconfig | 2 +-
arch/mips/txx9/generic/setup.c | 70 +++++++++++++++++++++---------------------
2 files changed, 36 insertions(+), 36 deletions(-)
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 8c337d60f790db9f..42923478d45ca363 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -20,7 +20,7 @@ config MACH_TXX9
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
- select HAVE_CLK
+ select COMMON_CLK
config TOSHIBA_JMR3927
bool "Toshiba JMR-TX3927 board"
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index ada92db92f87d91a..a1d98b5c8fd67576 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -15,7 +15,8 @@
#include <linux/interrupt.h>
#include <linux/string.h>
#include <linux/module.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/platform_device.h>
@@ -83,40 +84,6 @@ int txx9_ccfg_toeon __initdata;
int txx9_ccfg_toeon __initdata = 1;
#endif
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- if (!strcmp(id, "spi-baseclk"))
- return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 2);
- if (!strcmp(id, "imbus_clk"))
- return (struct clk *)((unsigned long)txx9_gbus_clock / 2);
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
#define BOARD_VEC(board) extern struct txx9_board_vec board;
#include <asm/txx9/boards.h>
#undef BOARD_VEC
@@ -560,8 +527,41 @@ void __init plat_time_init(void)
txx9_board_vec->time_init();
}
+static void txx9_clk_init(void)
+{
+ struct clk_hw *hw;
+ int error;
+
+ hw = clk_hw_register_fixed_rate(NULL, "gbus", NULL, 0, txx9_gbus_clock);
+ if (IS_ERR(hw)) {
+ error = PTR_ERR(hw);
+ goto fail;
+ }
+
+ hw = clk_hw_register_fixed_factor(NULL, "imbus", "gbus", 0, 1, 2);
+ error = clk_hw_register_clkdev(hw, "imbus_clk", NULL);
+ if (error)
+ goto fail;
+
+#ifdef CONFIG_CPU_TX49XX
+ if (TX4938_REV_PCODE() == 0x4938) {
+ hw = clk_hw_register_fixed_factor(NULL, "spi", "gbus", 0, 1, 4);
+ error = clk_hw_register_clkdev(hw, "spi-baseclk", NULL);
+ if (error)
+ goto fail;
+ }
+#endif
+
+ return;
+
+fail:
+ pr_err("Failed to register clocks: %d\n", error);
+}
+
static int __init _txx9_arch_init(void)
{
+ txx9_clk_init();
+
if (txx9_board_vec->arch_init)
txx9_board_vec->arch_init();
return 0;
--
1.9.1
