Hi Paul,
On 08/26/2016 04:17 PM, Paul Burton wrote:
SEAD3 is now using the generic syscon & regmap based register-bit-led
driver, so remove the unused custom SEAD3 LED driver.
Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
---
Changes in v2: None
drivers/leds/Kconfig | 10 ------
drivers/leds/Makefile | 1 -
drivers/leds/leds-sead3.c | 78 -----------------------------------------------
3 files changed, 89 deletions(-)
delete mode 100644 drivers/leds/leds-sead3.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9dcc9b1..025de7e 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -574,16 +574,6 @@ config LEDS_KTD2692
Say Y to enable this driver.
-config LEDS_SEAD3
- tristate "LED support for the MIPS SEAD 3 board"
- depends on LEDS_CLASS && MIPS_SEAD3
- help
- Say Y here to include support for the FLED and PLED LEDs on SEAD3 eval
- boards.
-
- This driver can also be built as a module. If so the module
- will be called leds-sead3.
-
config LEDS_IS31FL32XX
tristate "LED support for ISSI IS31FL32XX I2C LED controller family"
depends on LEDS_CLASS && I2C && OF
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 0684c86..da594cf 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -66,7 +66,6 @@ obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o
-obj-$(CONFIG_LEDS_SEAD3) += leds-sead3.o
obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
# LED SPI Drivers
diff --git a/drivers/leds/leds-sead3.c b/drivers/leds/leds-sead3.c
deleted file mode 100644
index eb97a32..0000000
--- a/drivers/leds/leds-sead3.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2015 Imagination Technologies, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mips-boards/sead3-addr.h>
-
-static void sead3_pled_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- writel(value, (void __iomem *)SEAD3_CPLD_P_LED);
-}
-
-static void sead3_fled_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- writel(value, (void __iomem *)SEAD3_CPLD_F_LED);
-}
-
-static struct led_classdev sead3_pled = {
- .name = "sead3::pled",
- .brightness_set = sead3_pled_set,
- .flags = LED_CORE_SUSPENDRESUME,
-};
-
-static struct led_classdev sead3_fled = {
- .name = "sead3::fled",
- .brightness_set = sead3_fled_set,
- .flags = LED_CORE_SUSPENDRESUME,
-};
-
-static int sead3_led_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = led_classdev_register(&pdev->dev, &sead3_pled);
- if (ret < 0)
- return ret;
-
- ret = led_classdev_register(&pdev->dev, &sead3_fled);
- if (ret < 0)
- led_classdev_unregister(&sead3_pled);
-
- return ret;
-}
-
-static int sead3_led_remove(struct platform_device *pdev)
-{
- led_classdev_unregister(&sead3_pled);
- led_classdev_unregister(&sead3_fled);
-
- return 0;
-}
-
-static struct platform_driver sead3_led_driver = {
- .probe = sead3_led_probe,
- .remove = sead3_led_remove,
- .driver = {
- .name = "sead3-led",
- },
-};
-
-module_platform_driver(sead3_led_driver);
-
-MODULE_AUTHOR("Kristian Kielhofner <kris@xxxxxxxxx>");
-MODULE_DESCRIPTION("SEAD3 LED driver");
-MODULE_LICENSE("GPL");
Currently the patch doesn't apply cleanly on the linux-leds.git,
for-next branch, due to the fresh changes in the surrounding code in
the drivers/leds/Makefile and Kconfig. Does this patch depend on
the previous patches in this series, or I can take it now and apply
to the LEDs git?
--
Best regards,
Jacek Anaszewski
