[PATCH 15/26] irqchip: mips-cpu: Replace magic 0x100 with IE_SW0

[Paul Burton <paul.burton@xxxxxxxxxx>]

Replace use of the magic number 0x100 (ie. bit 8) with the more
explanatory IE_SW0 (ie. interrupt enable for software interrupt 0) or
C_SW0 (ie. cause bit for software interrupt 0) as appropriate.

Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
---

 drivers/irqchip/irq-mips-cpu.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-mips-cpu.c b/drivers/irqchip/irq-mips-cpu.c
index 8c504f5..e6b4136 100644
--- a/drivers/irqchip/irq-mips-cpu.c
+++ b/drivers/irqchip/irq-mips-cpu.c
@@ -41,13 +41,13 @@
 
 static inline void unmask_mips_irq(struct irq_data *d)
 {
-	set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+	set_c0_status(IE_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
 	irq_enable_hazard();
 }
 
 static inline void mask_mips_irq(struct irq_data *d)
 {
-	clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+	clear_c0_status(IE_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
 	irq_disable_hazard();
 }
 
@@ -70,7 +70,7 @@ static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
 {
 	unsigned int vpflags = dvpe();
 
-	clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+	clear_c0_cause(C_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
 	evpe(vpflags);
 	unmask_mips_irq(d);
 	return 0;
@@ -83,7 +83,7 @@ static unsigned int mips_mt_cpu_irq_startup(struct irq_data *d)
 static void mips_mt_cpu_irq_ack(struct irq_data *d)
 {
 	unsigned int vpflags = dvpe();
-	clear_c0_cause(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+	clear_c0_cause(C_SW0 << (d->irq - MIPS_CPU_IRQ_BASE));
 	evpe(vpflags);
 	mask_mips_irq(d);
 }
-- 
2.9.3