[PATCH v2 01/19] MIPS: SEAD3: Split obj-y entries across lines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Split the obj-y entries for SEAD3 onto a line each, so that they're more
independent & can be modified more clearly by later commits.

Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
---

Changes in v2: None

 arch/mips/mti-sead3/Makefile | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
index 7a584e0..8b03cfb 100644
--- a/arch/mips/mti-sead3/Makefile
+++ b/arch/mips/mti-sead3/Makefile
@@ -8,8 +8,13 @@
 # Copyright (C) 2012 MIPS Technoligies, Inc.  All rights reserved.
 # Steven J. Hill <sjhill@xxxxxxxx>
 #
-obj-y				:= sead3-lcd.o sead3-display.o sead3-init.o \
-				   sead3-int.o sead3-platform.o sead3-reset.o \
-				   sead3-setup.o sead3-time.o
+obj-y := sead3-lcd.o
+obj-y += sead3-display.o
+obj-y += sead3-init.o
+obj-y += sead3-int.o
+obj-y += sead3-platform.o
+obj-y += sead3-reset.o
+obj-y += sead3-setup.o
+obj-y += sead3-time.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= sead3-console.o
-- 
2.9.3





[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux