Hi Hauke, I also had no problem with booting 4.4 on my bcm47xx legacy devices. I just tested again with LEDE's current trunk: [1] does not boot on WRT54GL As already said: if I clone the repo and build it myself, the device boots perfectly fine (on 4.1 and 4.4) Can you confirm, that [1] does not boot on your WRT54G/GL/GS? In my opinion it's hard to discuss kernels not booting as long as the builds are not reproducable or deterministic. Maybe we can first figure out why [1] doesn't boot on some devices. Best regards, P. Wassi [1]: https://downloads.lede-project.org/snapshots/targets/brcm47xx/legacy/lede-brcm47xx-legacy-standard-squashfs.trx > Hi, I just tested this on two of my older bcm47xx devices and I had no > problem with kernel 4.4.14 from LEDE with all the LEDE patches: > > Asus WL500GP V1: > CFE version 1.0.37 for BCM947XX (32bit,SP,LE) > Build Date: �| 10�� 12 22:21:19 CST 2006 (root@localhost.localdomain) > Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. > > Initializing Arena > Initializing Devices. > et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0 > rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) > CPU type 0x29006: 264MHz > Total memory: 33554432 KBytes > > Total memory used by CFE: 0x80800000 - 0x8089AF40 (634688) > Initialized Data: 0x808313D0 - 0x80833790 (9152) > BSS Area: 0x80833790 - 0x80834F40 (6064) > Local Heap: 0x80834F40 - 0x80898F40 (409600) > Stack Area: 0x80898F40 - 0x8089AF40 (8192) > Text (code) segment: 0x80800000 - 0x808313D0 (201680) > Boot area (physical): 0x0089B000 - 0x008DB000 > Relocation Factor: I:00000000 - D:00000000 > > Device eth0: hwaddr 00-1A-92-EA-73-12, ipaddr 192.168.1.3, mask > 255.255.255.0 > gateway not set, nameserver not set > Null Rescue Flag. > Reading :: TFTP Server. > Failed.: Timeout occured > Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) > Loading: .. 3800 bytes read > Entry at 0x80001000 > Closing network. > Starting program at 0x80001000 > [ 0.000000] Linux version 4.4.14 (hauke@hauke-desktop) (gcc version > 5.3.0 (LEDE GCC 5.3.0 r829) ) #1 Thu Jun 30 20:49:41 UTC 2016 > [ 0.000000] CPU0 revision is: 00029006 (Broadcom BMIPS3300) > [ 0.000000] bcm47xx: Using ssb bus > [ 0.000000] ssb: Found chip with id 0x4704, rev 0x09 and package 0x00 > > > > > Linksys WRT54G/GS/GL: > CFE version 1.0.37 for BCM947XX (32bit,SP,LE) > Build Date: Fri Jun 25 15:49:22 CST 2004 (root@Amin) > Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. > > Initializing Arena. > Initializing Devices. > et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0 > rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) > CPU type 0x29007: 200MHz > Total memory: 0x2000000 bytes (32MB) > > Total memory used by CFE: 0x80300000 - 0x8043DF30 (1302320) > Initialized Data: 0x803381A0 - 0x8033A550 (9136) > BSS Area: 0x8033A550 - 0x8033BF30 (6624) > Local Heap: 0x8033BF30 - 0x8043BF30 (1048576) > Stack Area: 0x8043BF30 - 0x8043DF30 (8192) > Text (code) segment: 0x80300000 - 0x803381A0 (229792) > Boot area (physical): 0x0043E000 - 0x0047E000 > Relocation Factor: I:00000000 - D:00000000 > > Boot version: v3.2 > The boot is CFE > > mac_init(): Find mac [00:0F:66:D3:94:95] in location 1 > Nothing... > > No eou key find > Device eth0: hwaddr 00-0F-66-D3-94-95, ipaddr 192.168.1.1, mask > 255.255.255.0 > gateway not set, nameserver not set > Reading :: Failed.: Timeout occured > Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) > Loading: .. 3800 bytes read > Entry at 0x80001000 > Closing network. > Starting program at 0x80001000 > [ 0.000000] Linux version 4.4.14 (hauke@hauke-desktop) (gcc version > 5.3.0 (LEDE GCC 5.3.0 r829) ) #1 Thu Jun 30 20:49:41 UTC 2016 > [ 0.000000] CPU0 revision is: 00029007 (Broadcom BMIPS3300) > [ 0.000000] bcm47xx: Using ssb bus > [ 0.000000] ssb: Found chip with id 0x4712, rev 0x01 and package 0x00 > > >
