Convert MIPS KVM guest register state initialisation to use the standard
<asm/mipsregs.h> register field definitions for Config registers, and
drop the custom definitions in kvm_host.h which it was using before.
Signed-off-by: James Hogan <james.hogan@xxxxxxxxxx>
Cc: Paolo Bonzini <pbonzini@xxxxxxxxxx>
Cc: Radim Krčmář <rkrcmar@xxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxx
Cc: kvm@xxxxxxxxxxxxxxx
---
arch/mips/include/asm/kvm_host.h | 67 ----------------------------------------
arch/mips/kvm/trap_emul.c | 8 ++---
2 files changed, 3 insertions(+), 72 deletions(-)
diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h
index 6c43c782bdfa..b0773c6d622f 100644
--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@@ -205,73 +205,6 @@ struct mips_coproc {
#define MIPS_CP0_CONFIG4_SEL 4
#define MIPS_CP0_CONFIG5_SEL 5
-/* Config0 register bits */
-#define CP0C0_M 31
-#define CP0C0_K23 28
-#define CP0C0_KU 25
-#define CP0C0_MDU 20
-#define CP0C0_MM 17
-#define CP0C0_BM 16
-#define CP0C0_BE 15
-#define CP0C0_AT 13
-#define CP0C0_AR 10
-#define CP0C0_MT 7
-#define CP0C0_VI 3
-#define CP0C0_K0 0
-
-/* Config1 register bits */
-#define CP0C1_M 31
-#define CP0C1_MMU 25
-#define CP0C1_IS 22
-#define CP0C1_IL 19
-#define CP0C1_IA 16
-#define CP0C1_DS 13
-#define CP0C1_DL 10
-#define CP0C1_DA 7
-#define CP0C1_C2 6
-#define CP0C1_MD 5
-#define CP0C1_PC 4
-#define CP0C1_WR 3
-#define CP0C1_CA 2
-#define CP0C1_EP 1
-#define CP0C1_FP 0
-
-/* Config2 Register bits */
-#define CP0C2_M 31
-#define CP0C2_TU 28
-#define CP0C2_TS 24
-#define CP0C2_TL 20
-#define CP0C2_TA 16
-#define CP0C2_SU 12
-#define CP0C2_SS 8
-#define CP0C2_SL 4
-#define CP0C2_SA 0
-
-/* Config3 Register bits */
-#define CP0C3_M 31
-#define CP0C3_ISA_ON_EXC 16
-#define CP0C3_ULRI 13
-#define CP0C3_DSPP 10
-#define CP0C3_LPA 7
-#define CP0C3_VEIC 6
-#define CP0C3_VInt 5
-#define CP0C3_SP 4
-#define CP0C3_MT 2
-#define CP0C3_SM 1
-#define CP0C3_TL 0
-
-/* MMU types, the first four entries have the same layout as the
- CP0C0_MT field. */
-enum mips_mmu_types {
- MMU_TYPE_NONE,
- MMU_TYPE_R4000,
- MMU_TYPE_RESERVED,
- MMU_TYPE_FMT,
- MMU_TYPE_R3000,
- MMU_TYPE_R6000,
- MMU_TYPE_R8000
-};
-
/* Resume Flags */
#define RESUME_FLAG_DR (1<<0) /* Reload guest nonvolatile state? */
#define RESUME_FLAG_HOST (1<<1) /* Resume host? */
diff --git a/arch/mips/kvm/trap_emul.c b/arch/mips/kvm/trap_emul.c
index 1dc003ddca91..00e8dc3d36cb 100644
--- a/arch/mips/kvm/trap_emul.c
+++ b/arch/mips/kvm/trap_emul.c
@@ -440,8 +440,7 @@ static int kvm_trap_emul_vcpu_setup(struct kvm_vcpu *vcpu)
* host.
*/
config = read_c0_config() & MIPS_CONF_AR;
- config |= MIPS_CONF_M | (0x3 << CP0C0_K0) |
- (MMU_TYPE_R4000 << CP0C0_MT);
+ config |= MIPS_CONF_M | CONF_CM_CACHABLE_NONCOHERENT | MIPS_CONF_MT_TLB;
#ifdef CONFIG_CPU_BIG_ENDIAN
config |= CONF_BE;
#endif
@@ -457,9 +456,8 @@ static int kvm_trap_emul_vcpu_setup(struct kvm_vcpu *vcpu)
config1 |= ((KVM_MIPS_GUEST_TLB_SIZE - 1) << 25);
/* We unset some bits that we aren't emulating */
- config1 &=
- ~((1 << CP0C1_C2) | (1 << CP0C1_MD) | (1 << CP0C1_PC) |
- (1 << CP0C1_WR) | (1 << CP0C1_CA));
+ config1 &= ~(MIPS_CONF1_C2 | MIPS_CONF1_MD | MIPS_CONF1_PC |
+ MIPS_CONF1_WR | MIPS_CONF1_CA);
kvm_write_c0_guest_config1(cop0, config1);
/* Have config3, no tertiary/secondary caches implemented */
--
2.4.10
