Adds basic platform devices for Loongson1C, including serial port
and ethernet.
Signed-off-by: Yang Ling <gnaygnil@xxxxxxxxx>
---
arch/mips/Kconfig | 13 +++++
arch/mips/include/asm/mach-loongson32/irq.h | 41 ++++++++++++++-
arch/mips/include/asm/mach-loongson32/loongson1.h | 5 ++
arch/mips/include/asm/mach-loongson32/regs-clk.h | 34 +++++++++++++
arch/mips/include/asm/mach-loongson32/regs-mux.h | 61 +++++++++++++++++++++++
arch/mips/loongson32/Kconfig | 15 ++++++
arch/mips/loongson32/Makefile | 6 +++
arch/mips/loongson32/Platform | 1 +
arch/mips/loongson32/common/irq.c | 55 ++++++++++++++++++--
arch/mips/loongson32/common/platform.c | 19 +++++++
arch/mips/loongson32/common/setup.c | 4 ++
arch/mips/loongson32/ls1c/Makefile | 5 ++
arch/mips/loongson32/ls1c/board.c | 28 +++++++++++
13 files changed, 283 insertions(+), 4 deletions(-)
create mode 100644 arch/mips/loongson32/ls1c/Makefile
create mode 100644 arch/mips/loongson32/ls1c/board.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e237868..4093cfa 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1384,6 +1384,16 @@ config CPU_LOONGSON1B
The Loongson 1B is a 32-bit SoC, which implements the MIPS32
release 2 instruction set.
+config CPU_LOONGSON1C
+ bool "Loongson 1C"
+ depends on SYS_HAS_CPU_LOONGSON1C
+ select CPU_LOONGSON1
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select LEDS_GPIO_REGISTER
+ help
+ The Loongson 1C is a 32-bit SoC, which implements the MIPS32
+ release 2 instruction set.
+
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1
@@ -1827,6 +1837,9 @@ config SYS_HAS_CPU_LOONGSON2F
config SYS_HAS_CPU_LOONGSON1B
bool
+config SYS_HAS_CPU_LOONGSON1C
+ bool
+
config SYS_HAS_CPU_MIPS32_R1
bool
diff --git a/arch/mips/include/asm/mach-loongson32/irq.h b/arch/mips/include/asm/mach-loongson32/irq.h
index c1c7441..8c01b30 100644
--- a/arch/mips/include/asm/mach-loongson32/irq.h
+++ b/arch/mips/include/asm/mach-loongson32/irq.h
@@ -36,9 +36,14 @@
#define LS1X_IRQ(n, x) (LS1X_IRQ_BASE + (n << 5) + (x))
#define LS1X_UART0_IRQ LS1X_IRQ(0, 2)
+#if defined(CONFIG_LOONGSON1_LS1B)
#define LS1X_UART1_IRQ LS1X_IRQ(0, 3)
#define LS1X_UART2_IRQ LS1X_IRQ(0, 4)
#define LS1X_UART3_IRQ LS1X_IRQ(0, 5)
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define LS1X_UART1_IRQ LS1X_IRQ(0, 4)
+#define LS1X_UART2_IRQ LS1X_IRQ(0, 5)
+#endif
#define LS1X_CAN0_IRQ LS1X_IRQ(0, 6)
#define LS1X_CAN1_IRQ LS1X_IRQ(0, 7)
#define LS1X_SPI0_IRQ LS1X_IRQ(0, 8)
@@ -47,6 +52,9 @@
#define LS1X_DMA0_IRQ LS1X_IRQ(0, 13)
#define LS1X_DMA1_IRQ LS1X_IRQ(0, 14)
#define LS1X_DMA2_IRQ LS1X_IRQ(0, 15)
+#if defined(CONFIG_LOONGSON1_LS1C)
+#define LS1X_NAND_IRQ LS1X_IRQ(0, 16)
+#endif
#define LS1X_PWM0_IRQ LS1X_IRQ(0, 17)
#define LS1X_PWM1_IRQ LS1X_IRQ(0, 18)
#define LS1X_PWM2_IRQ LS1X_IRQ(0, 19)
@@ -54,18 +62,49 @@
#define LS1X_RTC_INT0_IRQ LS1X_IRQ(0, 21)
#define LS1X_RTC_INT1_IRQ LS1X_IRQ(0, 22)
#define LS1X_RTC_INT2_IRQ LS1X_IRQ(0, 23)
+#if defined(CONFIG_LOONGSON1_LS1B)
#define LS1X_TOY_INT0_IRQ LS1X_IRQ(0, 24)
#define LS1X_TOY_INT1_IRQ LS1X_IRQ(0, 25)
#define LS1X_TOY_INT2_IRQ LS1X_IRQ(0, 26)
#define LS1X_RTC_TICK_IRQ LS1X_IRQ(0, 27)
#define LS1X_TOY_TICK_IRQ LS1X_IRQ(0, 28)
+#define LS1X_UART4_IRQ LS1X_IRQ(0, 29)
+#define LS1X_UART5_IRQ LS1X_IRQ(0, 30)
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define LS1X_UART3_IRQ LS1X_IRQ(0, 29)
+#define LS1X_ADC_IRQ LS1X_IRQ(0, 30)
+#define LS1X_SDIO_IRQ LS1X_IRQ(0, 31)
+#endif
#define LS1X_EHCI_IRQ LS1X_IRQ(1, 0)
#define LS1X_OHCI_IRQ LS1X_IRQ(1, 1)
+#if defined(CONFIG_LOONGSON1_LS1B)
#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 2)
#define LS1X_GMAC1_IRQ LS1X_IRQ(1, 3)
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define LS1X_OTG_IRQ LS1X_IRQ(1, 2)
+#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 3)
+#define LS1X_CAM_IRQ LS1X_IRQ(1, 4)
+#define LS1X_UART4_IRQ LS1X_IRQ(1, 5)
+#define LS1X_UART5_IRQ LS1X_IRQ(1, 6)
+#define LS1X_UART6_IRQ LS1X_IRQ(1, 7)
+#define LS1X_UART7_IRQ LS1X_IRQ(1, 8)
+#define LS1X_UART8_IRQ LS1X_IRQ(1, 9)
+#define LS1X_UART9_IRQ LS1X_IRQ(1, 13)
+#define LS1X_UART10_IRQ LS1X_IRQ(1, 14)
+#define LS1X_UART11_IRQ LS1X_IRQ(1, 15)
+#define LS1X_I2C0_IRQ LS1X_IRQ(1, 17)
+#define LS1X_I2C1_IRQ LS1X_IRQ(1, 18)
+#define LS1X_I2C2_IRQ LS1X_IRQ(1, 19)
+#endif
-#define LS1X_IRQS (LS1X_IRQ(4, 31) + 1 - LS1X_IRQ_BASE)
+#if defined(CONFIG_LOONGSON1_LS1B)
+#define INTN 4
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define INTN 5
+#endif
+
+#define LS1X_IRQS (LS1X_IRQ(INTN, 31) + 1 - LS1X_IRQ_BASE)
#define NR_IRQS (MIPS_CPU_IRQS + LS1X_IRQS)
diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h
index 978f6df..3584c40 100644
--- a/arch/mips/include/asm/mach-loongson32/loongson1.h
+++ b/arch/mips/include/asm/mach-loongson32/loongson1.h
@@ -12,7 +12,11 @@
#ifndef __ASM_MACH_LOONGSON32_LOONGSON1_H
#define __ASM_MACH_LOONGSON32_LOONGSON1_H
+#if defined(CONFIG_LOONGSON1_LS1B)
#define DEFAULT_MEMSIZE 256 /* If no memsize provided */
+#elif defined(CONFIG_LOONGSON1_LS1C)
+#define DEFAULT_MEMSIZE 32
+#endif
/* Loongson 1 Register Bases */
#define LS1X_MUX_BASE 0x1fd00420
@@ -20,6 +24,7 @@
#define LS1X_GPIO0_BASE 0x1fd010c0
#define LS1X_GPIO1_BASE 0x1fd010c4
#define LS1X_DMAC_BASE 0x1fd01160
+#define LS1X_CBUS_BASE 0x1fd011c0
#define LS1X_EHCI_BASE 0x1fe00000
#define LS1X_OHCI_BASE 0x1fe08000
#define LS1X_GMAC0_BASE 0x1fe10000
diff --git a/arch/mips/include/asm/mach-loongson32/regs-clk.h b/arch/mips/include/asm/mach-loongson32/regs-clk.h
index 4d56fc3..e5e8f11 100644
--- a/arch/mips/include/asm/mach-loongson32/regs-clk.h
+++ b/arch/mips/include/asm/mach-loongson32/regs-clk.h
@@ -18,6 +18,7 @@
#define LS1X_CLK_PLL_FREQ LS1X_CLK_REG(0x0)
#define LS1X_CLK_PLL_DIV LS1X_CLK_REG(0x4)
+#if defined(CONFIG_LOONGSON1_LS1B)
/* Clock PLL Divisor Register Bits */
#define DIV_DC_EN BIT(31)
#define DIV_DC_RST BIT(30)
@@ -48,4 +49,37 @@
#define BYPASS_DDR_WIDTH 1
#define BYPASS_CPU_WIDTH 1
+#elif defined(CONFIG_LOONGSON1_LS1C)
+/* PLL/SDRAM Frequency configuration register Bits */
+#define PLL_VALID BIT(31)
+#define FRAC_N GENMASK(23, 16)
+#define RST_TIME GENMASK(3, 2)
+#define SDRAM_DIV GENMASK(1, 0)
+
+/* CPU/CAMERA/DC Frequency configuration register Bits */
+#define DIV_DC_EN BIT(31)
+#define DIV_DC GENMASK(30, 24)
+#define DIV_CAM_EN BIT(23)
+#define DIV_CAM GENMASK(22, 16)
+#define DIV_CPU_EN BIT(15)
+#define DIV_CPU GENMASK(14, 8)
+#define DIV_DC_SEL_EN BIT(5)
+#define DIV_DC_SEL BIT(4)
+#define DIV_CAM_SEL_EN BIT(3)
+#define DIV_CAM_SEL BIT(2)
+#define DIV_CPU_SEL_EN BIT(1)
+#define DIV_CPU_SEL BIT(0)
+
+#define DIV_DC_SHIFT 24
+#define DIV_CAM_SHIFT 16
+#define DIV_CPU_SHIFT 8
+#define DIV_DDR_SHIFT 0
+
+#define DIV_DC_WIDTH 7
+#define DIV_CAM_WIDTH 7
+#define DIV_CPU_WIDTH 7
+#define DIV_DDR_WIDTH 2
+
+#endif
+
#endif /* __ASM_MACH_LOONGSON32_REGS_CLK_H */
diff --git a/arch/mips/include/asm/mach-loongson32/regs-mux.h b/arch/mips/include/asm/mach-loongson32/regs-mux.h
index 7c394f9..4a0bdeb 100644
--- a/arch/mips/include/asm/mach-loongson32/regs-mux.h
+++ b/arch/mips/include/asm/mach-loongson32/regs-mux.h
@@ -18,6 +18,7 @@
#define LS1X_MUX_CTRL0 LS1X_MUX_REG(0x0)
#define LS1X_MUX_CTRL1 LS1X_MUX_REG(0x4)
+#if defined(CONFIG_LOONGSON1_LS1B)
/* MUX CTRL0 Register Bits */
#define UART0_USE_PWM23 BIT(28)
#define UART0_USE_PWM01 BIT(27)
@@ -64,4 +65,64 @@
#define GMAC1_USE_PWM23 BIT(1)
#define GMAC0_USE_PWM01 BIT(0)
+#elif defined(CONFIG_LOONGSON1_LS1C)
+
+/* SHUT_CTRL Register Bits */
+#define UART_SPLIT GENMASK(31, 30)
+#define OUTPUT_CLK GENMASK(29, 26)
+#define ADC_SHUT BIT(25)
+#define SDIO_SHUT BIT(24)
+#define DMA2_SHUT BIT(23)
+#define DMA1_SHUT BIT(22)
+#define DMA0_SHUT BIT(21)
+#define SPI1_SHUT BIT(20)
+#define SPI0_SHUT BIT(19)
+#define I2C2_SHUT BIT(18)
+#define I2C1_SHUT BIT(17)
+#define I2C0_SHUT BIT(16)
+#define AC97_SHUT BIT(15)
+#define I2S_SHUT BIT(14)
+#define UART3_SHUT BIT(13)
+#define UART2_SHUT BIT(12)
+#define UART1_SHUT BIT(11)
+#define UART0_SHUT BIT(10)
+#define CAN1_SHUT BIT(9)
+#define CAN0_SHUT BIT(8)
+#define ECC_SHUT BIT(7)
+#define GMAC_SHUT BIT(6)
+#define USBHOST_SHUT BIT(5)
+#define USBOTG_SHUT BIT(4)
+#define SDRAM_SHUT BIT(3)
+#define SRAM_SHUT BIT(2)
+#define CAM_SHUT BIT(1)
+#define LCD_SHUT BIT(0)
+
+#define UART_SPLIT_SHIFT 30
+#define OUTPUT_CLK_SHIFT 26
+
+/* MISC_CTRL Register Bits */
+#define USBHOST_RSTN BIT(31)
+#define PHY_INTF_SELI GENMASK(30, 28)
+#define AC97_EN BIT(25)
+#define SDIO_DMA_EN GENMASK(24, 23)
+#define ADC_DMA_EN BIT(22)
+#define SDIO_USE_SPI1 BIT(17)
+#define SDIO_USE_SPI0 BIT(16)
+#define SRAM_CTRL GENMASK(15, 0)
+
+#define PHY_INTF_SELI_SHIFT 28
+#define SDIO_DMA_EN_SHIFT 23
+#define SRAM_CTRL_SHIFT 0
+
+#define LS1X_CBUS_REG(n, x) \
+ ((void __iomem *)KSEG1ADDR(LS1X_CBUS_BASE + (n * 0x04) + (x)))
+
+#define LS1X_CBUS_FIRST(n) LS1X_CBUS_REG(n, 0x00)
+#define LS1X_CBUS_SECOND(n) LS1X_CBUS_REG(n, 0x10)
+#define LS1X_CBUS_THIRD(n) LS1X_CBUS_REG(n, 0x20)
+#define LS1X_CBUS_FOURTHT(n) LS1X_CBUS_REG(n, 0x30)
+#define LS1X_CBUS_FIFTHT(n) LS1X_CBUS_REG(n, 0x40)
+
+#endif
+
#endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 7704f20..3c0c2f2 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -19,6 +19,21 @@ config LOONGSON1_LS1B
select USE_GENERIC_EARLY_PRINTK_8250
select COMMON_CLK
+config LOONGSON1_LS1C
+ bool "Loongson LS1C board"
+ select CEVT_R4K if !MIPS_EXTERNAL_TIMER
+ select CSRC_R4K if !MIPS_EXTERNAL_TIMER
+ select SYS_HAS_CPU_LOONGSON1C
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select IRQ_MIPS_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_MIPS16
+ select SYS_HAS_EARLY_PRINTK
+ select USE_GENERIC_EARLY_PRINTK_8250
+ select COMMON_CLK
endchoice
menuconfig CEVT_CSRC_LS1X
diff --git a/arch/mips/loongson32/Makefile b/arch/mips/loongson32/Makefile
index 5f4bd6e..1ab2c5b 100644
--- a/arch/mips/loongson32/Makefile
+++ b/arch/mips/loongson32/Makefile
@@ -9,3 +9,9 @@ obj-$(CONFIG_MACH_LOONGSON32) += common/
#
obj-$(CONFIG_LOONGSON1_LS1B) += ls1b/
+
+#
+# Loongson LS1C board
+#
+
+obj-$(CONFIG_LOONGSON1_LS1C) += ls1c/
diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform
index ebb6dc2..ffe01c6 100644
--- a/arch/mips/loongson32/Platform
+++ b/arch/mips/loongson32/Platform
@@ -5,3 +5,4 @@ cflags-$(CONFIG_CPU_LOONGSON1) += \
platform-$(CONFIG_MACH_LOONGSON32) += loongson32/
cflags-$(CONFIG_MACH_LOONGSON32) += -I$(srctree)/arch/mips/include/asm/mach-loongson32
load-$(CONFIG_LOONGSON1_LS1B) += 0xffffffff80100000
+load-$(CONFIG_LOONGSON1_LS1C) += 0xffffffff80100000
diff --git a/arch/mips/loongson32/common/irq.c b/arch/mips/loongson32/common/irq.c
index 455a770..635a4ab 100644
--- a/arch/mips/loongson32/common/irq.c
+++ b/arch/mips/loongson32/common/irq.c
@@ -62,12 +62,58 @@ static void ls1x_irq_unmask(struct irq_data *d)
| (1 << bit), LS1X_INTC_INTIEN(n));
}
+static int ls1x_irq_settype(struct irq_data *d, unsigned int type)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ | (1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ & ~(1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ & ~(1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ & ~(1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ | (1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ | (1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ & ~(1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ | (1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ __raw_writel(__raw_readl(LS1X_INTC_INTPOL(n))
+ & ~(1 << bit), LS1X_INTC_INTPOL(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTEDGE(n))
+ | (1 << bit), LS1X_INTC_INTEDGE(n));
+ break;
+ case IRQ_TYPE_NONE:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static struct irq_chip ls1x_irq_chip = {
.name = "LS1X-INTC",
.irq_ack = ls1x_irq_ack,
.irq_mask = ls1x_irq_mask,
.irq_mask_ack = ls1x_irq_mask_ack,
.irq_unmask = ls1x_irq_unmask,
+ .irq_set_type = ls1x_irq_settype,
};
static void ls1x_irq_dispatch(int n)
@@ -107,7 +153,7 @@ asmlinkage void plat_irq_dispatch(void)
}
-struct irqaction cascade_irqaction = {
+static struct irqaction cascade_irqaction = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
@@ -120,7 +166,7 @@ static void __init ls1x_irq_init(int base)
/* Disable interrupts and clear pending,
* setup all IRQs as high level triggered
*/
- for (n = 0; n < 4; n++) {
+ for (n = 0; n < INTN; n++) {
__raw_writel(0x0, LS1X_INTC_INTIEN(n));
__raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
__raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
@@ -129,7 +175,7 @@ static void __init ls1x_irq_init(int base)
}
- for (n = base; n < LS1X_IRQS; n++) {
+ for (n = base; n < NR_IRQS; n++) {
irq_set_chip_and_handler(n, &ls1x_irq_chip,
handle_level_irq);
}
@@ -138,6 +184,9 @@ static void __init ls1x_irq_init(int base)
setup_irq(INT1_IRQ, &cascade_irqaction);
setup_irq(INT2_IRQ, &cascade_irqaction);
setup_irq(INT3_IRQ, &cascade_irqaction);
+#if defined(CONFIG_LOONGSON1_LS1C)
+ setup_irq(INT4_IRQ, &cascade_irqaction);
+#endif
}
void __init arch_init_irq(void)
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index f2c714d..4d12e36 100644
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -17,6 +17,7 @@
#include <linux/stmmac.h>
#include <linux/usb/ehci_pdriver.h>
+#include <platform.h>
#include <loongson1.h>
#include <cpufreq.h>
#include <dma.h>
@@ -132,6 +133,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
val = __raw_readl(LS1X_MUX_CTRL1);
+#if defined(CONFIG_LOONGSON1_LS1B)
plat_dat = dev_get_platdata(&pdev->dev);
if (plat_dat->bus_id) {
__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
@@ -165,6 +167,17 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
val &= ~GMAC0_SHUT;
}
__raw_writel(val, LS1X_MUX_CTRL1);
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ plat_dat = dev_get_platdata(&pdev->dev);
+
+ val &= ~PHY_INTF_SELI;
+ if (plat_dat->interface == PHY_INTERFACE_MODE_RMII)
+ val |= 0x4 << PHY_INTF_SELI_SHIFT;
+ __raw_writel(val, LS1X_MUX_CTRL1);
+
+ val = __raw_readl(LS1X_MUX_CTRL0);
+ __raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
+#endif
return 0;
}
@@ -172,7 +185,11 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
static struct plat_stmmacenet_data ls1x_eth0_pdata = {
.bus_id = 0,
.phy_addr = -1,
+#if defined(CONFIG_LOONGSON1_LS1B)
.interface = PHY_INTERFACE_MODE_MII,
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ .interface = PHY_INTERFACE_MODE_RMII,
+#endif
.mdio_bus_data = &ls1x_mdio_bus_data,
.dma_cfg = &ls1x_eth_dma_cfg,
.has_gmac = 1,
@@ -203,6 +220,7 @@ struct platform_device ls1x_eth0_pdev = {
},
};
+#ifdef CONFIG_LOONGSON1_LS1B
static struct plat_stmmacenet_data ls1x_eth1_pdata = {
.bus_id = 1,
.phy_addr = -1,
@@ -236,6 +254,7 @@ struct platform_device ls1x_eth1_pdev = {
.platform_data = &ls1x_eth1_pdata,
},
};
+#endif /* CONFIG_LOONGSON1_LS1B */
/* GPIO */
static struct resource ls1x_gpio0_resources[] = {
diff --git a/arch/mips/loongson32/common/setup.c b/arch/mips/loongson32/common/setup.c
index 62f41af..1640744 100644
--- a/arch/mips/loongson32/common/setup.c
+++ b/arch/mips/loongson32/common/setup.c
@@ -22,7 +22,11 @@ const char *get_system_type(void)
switch (processor_id & PRID_REV_MASK) {
case PRID_REV_LOONGSON1B:
+#if defined(CONFIG_LOONGSON1_LS1B)
return "LOONGSON LS1B";
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ return "LOONGSON LS1C";
+#endif
default:
return "LOONGSON (unknown)";
}
diff --git a/arch/mips/loongson32/ls1c/Makefile b/arch/mips/loongson32/ls1c/Makefile
new file mode 100644
index 0000000..891eac4
--- /dev/null
+++ b/arch/mips/loongson32/ls1c/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for loongson1B based machines.
+#
+
+obj-y += board.o
diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
new file mode 100644
index 0000000..3d69bd6
--- /dev/null
+++ b/arch/mips/loongson32/ls1c/board.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2016 Ling Yang <gnaygnil@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <platform.h>
+
+static struct platform_device *ls1c_platform_devices[] __initdata = {
+ &ls1x_uart_pdev,
+ &ls1x_eth0_pdev,
+};
+
+static int __init ls1c_platform_init(void)
+{
+ int err;
+
+ ls1x_serial_set_uartclk(&ls1x_uart_pdev);
+
+ err = platform_add_devices(ls1c_platform_devices,
+ ARRAY_SIZE(ls1c_platform_devices));
+ return err;
+}
+
+arch_initcall(ls1c_platform_init);
--
1.9.1
Rebase changes base on the following patch.
https://patchwork.linux-mips.org/patch/13039/
