On 17/05/16 15:31, Paul Burton wrote:
When using an external interrupt controller (EIC) the interrupt mask
bits in the cop0 Status register are reused for the Interrupt Priority
Level, and any interrupts with a priority lower than the field will be
ignored. Clear the field to 0 by default such that all interrupts are
serviced.
Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
---
arch/mips/kernel/smp-cps.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index 253e140..f19f0d3 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -307,8 +307,12 @@ static void cps_init_secondary(void)
if (cpu_has_mipsmt)
dmt();
- change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 |
- STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7);
+ if (cpu_has_veic)
+ clear_c0_status(ST0_IM);
+ else
+ change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 |
+ STATUSF_IP4 | STATUSF_IP5 |
+ STATUSF_IP6 | STATUSF_IP7);
}
static void cps_smp_finish(void)
Hi Paul
Reviewed-by: Matt Redfearn <matt.redfearn@xxxxxxxxxx>
Tested-by: Matt Redfearn <matt.redfearn@xxxxxxxxxx>
Thanks,
Matt
