Do not have the machine Kconfig entry point need to select BRCMSTB_GISB_ARB, instead, just let it be default ARCH_BRCMSTB which is a better way to deal with this. While at it, also make it default BMIPS_GENERIC so the legacy MIPS-based STB platforms can benefit from the same thing. Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- Changes in v2: - put conditional on the same line, do not use two default lines arch/arm/mach-bcm/Kconfig | 1 - drivers/bus/Kconfig | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index b95ea1135ef9..68ab6412392a 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -173,7 +173,6 @@ config ARCH_BRCMSTB select ARM_GIC select ARM_ERRATA_798181 if SMP select HAVE_ARM_ARCH_TIMER - select BRCMSTB_GISB_ARB select BRCMSTB_L2_IRQ select BCM7120_L2_IRQ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index d4a3a3133da5..8807495e0efd 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -58,6 +58,7 @@ config ARM_CCN config BRCMSTB_GISB_ARB bool "Broadcom STB GISB bus arbiter" depends on ARM || MIPS + default ARCH_BRCMSTB || BMIPS_GENERIC help Driver for the Broadcom Set Top Box System-on-a-chip internal bus arbiter. This driver provides timeout and target abort error handling -- 2.5.0
