Add UART, I2C, SATA device tree nodes on Broadcom BCM7xxx MIPS-based
platforms.
Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
arch/mips/boot/dts/brcm/bcm7125.dtsi | 69 +++++++++++++++-
arch/mips/boot/dts/brcm/bcm7346.dtsi | 2 -
arch/mips/boot/dts/brcm/bcm7358.dtsi | 2 -
arch/mips/boot/dts/brcm/bcm7360.dtsi | 42 +++++++++-
arch/mips/boot/dts/brcm/bcm7362.dtsi | 2 -
arch/mips/boot/dts/brcm/bcm7420.dtsi | 77 +++++++++++++++++-
arch/mips/boot/dts/brcm/bcm7425.dtsi | 94 +++++++++++++++++++++-
arch/mips/boot/dts/brcm/bcm7435.dtsi | 134 ++++++++++++++++++++++++++++++-
arch/mips/boot/dts/brcm/bcm97125cbmb.dts | 24 ++++++
arch/mips/boot/dts/brcm/bcm97360svmb.dts | 8 ++
arch/mips/boot/dts/brcm/bcm97420c.dts | 28 +++++++
arch/mips/boot/dts/brcm/bcm97425svmb.dts | 28 +++++++
arch/mips/boot/dts/brcm/bcm97435svmb.dts | 36 +++++++++
13 files changed, 530 insertions(+), 16 deletions(-)
diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi
index 3ae16053a0c9..550e1d9e3ee0 100644
--- a/arch/mips/boot/dts/brcm/bcm7125.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
@@ -85,14 +85,15 @@
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>;
- brcm,int-map-mask = <0x44>;
+ brcm,int-map-mask = <0x44>, <0xf000000>;
brcm,int-fwd-mask = <0x70000>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
- interrupts = <18>;
+ interrupts = <18>, <19>;
+ interrupt-names = "upg_main", "upg_bsc";
};
sun_top_ctrl: syscon@404000 {
@@ -118,6 +119,70 @@
status = "disabled";
};
+ uart1: serial@406b40 {
+ compatible = "ns16550a";
+ reg = <0x406b40 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <64>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406b80 {
+ compatible = "ns16550a";
+ reg = <0x406b80 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ bsca: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscc: i2c@406300 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406300 0x58>;
+ interrupts = <26>;
+ interrupt-names = "upg_bscc";
+ status = "disabled";
+ };
+
+ bscd: i2c@406380 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406380 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
ehci0: usb@488300 {
compatible = "brcm,bcm7125-ehci", "generic-ehci";
reg = <0x488300 0x100>;
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index 7ae7b3e6e0f8..ec959061d52e 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -24,8 +24,6 @@
aliases {
uart0 = &uart0;
- uart1 = &uart1;
- uart2 = &uart2;
};
cpu_intc: cpu_intc {
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
index 060805be619a..ca57fb5eb122 100644
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -18,8 +18,6 @@
aliases {
uart0 = &uart0;
- uart1 = &uart1;
- uart2 = &uart2;
};
cpu_intc: cpu_intc {
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index bcdb09bfe07b..1c0c3d438c7a 100644
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -18,8 +18,6 @@
aliases {
uart0 = &uart0;
- uart1 = &uart1;
- uart2 = &uart2;
};
cpu_intc: cpu_intc {
@@ -241,5 +239,45 @@
interrupts = <66>;
status = "disabled";
};
+
+ sata: sata@181000 {
+ compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <86>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ };
+ };
+
+ sata_phy: sata-phy@180100 {
+ compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+ reg = <0x180100 0x0eff>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
};
};
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index 8177676d497a..6b4713add4b8 100644
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -24,8 +24,6 @@
aliases {
uart0 = &uart0;
- uart1 = &uart1;
- uart2 = &uart2;
};
cpu_intc: cpu_intc {
diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi
index 3302a1b8a5c9..0586bf662571 100644
--- a/arch/mips/boot/dts/brcm/bcm7420.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi
@@ -86,14 +86,15 @@
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>;
- brcm,int-map-mask = <0x44>;
+ brcm,int-map-mask = <0x44>, <0x1f000000>;
brcm,int-fwd-mask = <0x70000>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
- interrupts = <18>;
+ interrupts = <18>, <19>;
+ interrupt-names = "upg_main", "upg_bsc";
};
sun_top_ctrl: syscon@404000 {
@@ -118,6 +119,78 @@
status = "disabled";
};
+ uart1: serial@406b40 {
+ compatible = "ns16550a";
+ reg = <0x406b40 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <64>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406b80 {
+ compatible = "ns16550a";
+ reg = <0x406b80 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ bsca: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscc: i2c@406300 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406300 0x58>;
+ interrupts = <26>;
+ interrupt-names = "upg_bscc";
+ status = "disabled";
+ };
+
+ bscd: i2c@406380 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406380 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
+ bsce: i2c@406800 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406800 0x58>;
+ interrupts = <28>;
+ interrupt-names = "upg_bsce";
+ status = "disabled";
+ };
+
enet0: ethernet@468000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index 8214d45bad46..c1c15edaf829 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -87,14 +87,32 @@
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>;
- brcm,int-map-mask = <0x44>;
+ brcm,int-map-mask = <0x44>, <0x7000000>;
brcm,int-fwd-mask = <0x70000>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
- interrupts = <55>;
+ interrupts = <55>, <53>;
+ interrupt-names = "upg_main", "upg_bsc";
+ };
+
+ upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x409480 0x8>;
+
+ brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
+ brcm,int-fwd-mask = <0>;
+ brcm,irq-can-wake;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <56>, <54>, <59>;
+ interrupt-names = "upg_main_aon", "upg_bsc_aon",
+ "upg_spi";
};
sun_top_ctrl: syscon@404000 {
@@ -119,6 +137,78 @@
status = "disabled";
};
+ uart1: serial@406b40 {
+ compatible = "ns16550a";
+ reg = <0x406b40 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406b80 {
+ compatible = "ns16550a";
+ reg = <0x406b80 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <63>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ bsca: i2c@409180 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x409180 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@409400 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x409400 0x58>;
+ interrupts = <28>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscc: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bscc";
+ status = "disabled";
+ };
+
+ bscd: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
+ bsce: i2c@406300 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406300 0x58>;
+ interrupts = <26>;
+ interrupt-names = "upg_bsce";
+ status = "disabled";
+ };
+
enet0: ethernet@b80000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
index 56035e5b7008..7d6ab1f93f0b 100644
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -101,14 +101,32 @@
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>;
- brcm,int-map-mask = <0x44>;
+ brcm,int-map-mask = <0x44>, <0x7000000>;
brcm,int-fwd-mask = <0x70000>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
- interrupts = <60>;
+ interrupts = <60>, <58>;
+ interrupt-names = "upg_main", "upg_bsc";
+ };
+
+ upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x409480 0x8>;
+
+ brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
+ brcm,int-fwd-mask = <0>;
+ brcm,irq-can-wake;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <61>, <59>, <64>;
+ interrupt-names = "upg_main_aon", "upg_bsc_aon",
+ "upg_spi";
};
sun_top_ctrl: syscon@404000 {
@@ -133,6 +151,78 @@
status = "disabled";
};
+ uart1: serial@406b40 {
+ compatible = "ns16550a";
+ reg = <0x406b40 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <67>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406b80 {
+ compatible = "ns16550a";
+ reg = <0x406b80 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <68>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ bsca: i2c@406300 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406300 0x58>;
+ interrupts = <26>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@409400 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x409400 0x58>;
+ interrupts = <28>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscc: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bscc";
+ status = "disabled";
+ };
+
+ bscd: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
+ bsce: i2c@409180 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x409180 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bsce";
+ status = "disabled";
+ };
+
enet0: ethernet@b80000 {
phy-mode = "internal";
phy-handle = <&phy1>;
@@ -235,5 +325,45 @@
interrupts = <78>;
status = "disabled";
};
+
+ sata: sata@181000 {
+ compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <45>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ };
+ };
+
+ sata_phy: sata-phy@180100 {
+ compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+ reg = <0x180100 0x0eff>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
};
};
diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
index e046b1109eab..f2449d147c6d 100644
--- a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
@@ -21,6 +21,30 @@
status = "okay";
};
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscc {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
/* FIXME: USB is wonky; disable it for now */
&ehci0 {
status = "disabled";
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index d48462e091f1..73124be9548a 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -56,3 +56,11 @@
&ohci0 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts
index 67fe1f3a3891..600d57abee05 100644
--- a/arch/mips/boot/dts/brcm/bcm97420c.dts
+++ b/arch/mips/boot/dts/brcm/bcm97420c.dts
@@ -23,6 +23,34 @@
status = "okay";
};
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscc {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
+&bsce {
+ status = "okay";
+};
+
/* FIXME: MAC driver comes up but cannot attach to PHY */
&enet0 {
status = "disabled";
diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
index 689c68a4f9c8..119c714805cb 100644
--- a/arch/mips/boot/dts/brcm/bcm97425svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -23,6 +23,34 @@
status = "okay";
};
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscc {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
+&bsce {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
index 1df088183523..13553ab2d0fd 100644
--- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -23,6 +23,34 @@
status = "okay";
};
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscc {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
+&bsce {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
@@ -58,3 +86,11 @@
&ohci3 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
--
2.8.0
