Le 03/02/2016 03:30, Paul Burton a écrit :
> Introduce support for struct hw_pci & the associated pci_common_init_dev
> function as used by the PCI drivers written for ARM platforms under
> drivers/pci. This is in preparation for reusing the xilinx-pcie driver
> on the MIPS Boston board.
>
> Platforms that make use of this more generic code will need to select
> CONFIG_MIPS_GENERIC_PCI. Platforms which don't will continue to work as
> they have, with the intent that PCI drivers be migrated towards struct
> hw_pci & drivers/pci/ over time.
>
> Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
> ---
[snip]
> + if (hw->preinit)
> + hw->preinit();
> +
> + ret = hw->setup(i, &ctl->sysdata);
> + if (ret < 0) {
This needs to be ret <= 0 to be compliant with what ARM PCI host
controllers do, which is return 1 in case they could get hw->setup to
finish with success, and 0 or negative if they could not, see
arch/arm/kernel/bios32.c.
--
Florian
