On 02/02/2016 04:41 PM, Sergei Shtylyov wrote:
> Hello.
> On 2/2/2016 1:44 AM, Joshua Henderson wrote:
>> From: Purna Chandra Mandal <purna.mandal@xxxxxxxxxxxxx>
>> Document the devicetree bindings for the SPI peripheral found
>> on Microchip PIC32 class devices.
>> Signed-off-by: Purna Chandra Mandal <purna.mandal@xxxxxxxxxxxxx>
>> Signed-off-by: Joshua Henderson <joshua.henderson@xxxxxxxxxxxxx>
>> ---
>> .../bindings/spi/microchip,spi-pic32.txt | 44 ++++++++++++++++++++
>> 1 file changed, 44 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt
>> diff --git a/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt b/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt
>> new file mode 100644
>> index 0000000..a555618
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt
>> @@ -0,0 +1,44 @@
>> +* Microchip PIC32 SPI device
>> +
>> +Required properties:
>> +- compatible: Should be "microchip,pic32mzda-spi".
>> +- reg: Address and length of the register set for the device
>> +- interrupts: Should contain all three spi interrupts in sequence
>> + of <fault-irq>, <receive-irq>, <transmit-irq>.
>> +- interrupt-names: Should be "fault","rx","tx" in order.
>>
> Please insert spaces after commas.
ack.
>> +- clocks: phandles of baud generation clocks. Maximum two possible clocks
>>
> Baud in the SPI context?
Yes, clock for generating spi clock (SCK). Will update the comment.
>> + can be provided (&PBCLK2, &REFCLKO1).
>>
> Please align.
ack.
>> + See: Documentation/devicetree/bindings/clock/clock-bindings.txt
>> +- clock-names: Should be "mck0","mck1".
>>
> Please insert space after comma.
ack.
> [...]
>> +Example:
>> +
>> + spi1:spi@0x1f821000 {
> Please insert spaces after colon.
ack
> [...]
> MBR, Sergei
>
