From: Andrei Pistirica <andrei.pistirica@xxxxxxxxxxxxx>
Document the devicetree bindings for the SDHCI peripheral found on
Microchip PIC32 class devices.
Signed-off-by: Andrei Pistirica <andrei.pistirica@xxxxxxxxxxxxx>
Signed-off-by: Joshua Henderson <joshua.henderson@xxxxxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/mmc/microchip,sdhci-pic32.txt | 29 ++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
new file mode 100644
index 0000000..71ad57e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
@@ -0,0 +1,29 @@
+* Microchip PIC32 SDHCI Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-pic32 driver.
+
+Required properties:
+- compatible: Should be "microchip,pic32mzda-sdhci"
+- interrupts: Should contain interrupt
+- clock-names: Should be "base_clk", "sys_clk".
+ See: Documentation/devicetree/bindings/resource-names.txt
+- clocks: Phandle to the clock.
+ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- pinctrl-names: A pinctrl state names "default" must be defined.
+- pinctrl-0: Phandle referencing pin configuration of the SDHCI controller.
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+Example:
+
+ sdhci@1f8ec000 {
+ compatible = "microchip,pic32mzda-sdhci";
+ reg = <0x1f8ec000 0x100>;
+ interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&REFCLKO4>, <&PBCLK5>;
+ clock-names = "base_clk", "sys_clk";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhc1>;
+ };
--
1.7.9.5
