From: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
This adds support for the interrupt controller present on PIC32 class
devices.
The following features are supported:
- DT properties for EVIC and for devices that use interrupt lines
- Persistent and non-persistent interrupt handling
- irqdomain support
Signed-off-by: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
Signed-off-by: Joshua Henderson <joshua.henderson@xxxxxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
---
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-pic32-evic.c | 307 ++++++++++++++++++++++++++++++++++++
include/linux/irqchip/pic32-evic.h | 19 +++
3 files changed, 327 insertions(+)
create mode 100644 drivers/irqchip/irq-pic32-evic.c
create mode 100644 include/linux/irqchip/pic32-evic.h
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 177f78f..e3608fc 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -55,3 +55,4 @@ obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
+obj-$(CONFIG_MACH_PIC32) += irq-pic32-evic.o
diff --git a/drivers/irqchip/irq-pic32-evic.c b/drivers/irqchip/irq-pic32-evic.c
new file mode 100644
index 0000000..fe7503d
--- /dev/null
+++ b/drivers/irqchip/irq-pic32-evic.c
@@ -0,0 +1,307 @@
+/*
+ * Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/pic32-evic.h>
+
+#include <asm/irq.h>
+#include <asm/traps.h>
+
+#define CORE_TIMER_INTERRUPT 0
+#define EXTERNAL_INTERRUPT_0 3
+#define EXTERNAL_INTERRUPT_1 8
+#define EXTERNAL_INTERRUPT_2 13
+#define EXTERNAL_INTERRUPT_3 18
+#define EXTERNAL_INTERRUPT_4 23
+
+#define PRI_MASK 0x7 /* 3 bit priority mask */
+#define SUBPRI_MASK 0x3 /* 2 bit subpriority mask */
+#define INT_MASK 0x1F /* 5 bit pri and subpri mask */
+#define NR_EXT_IRQS 5 /* 5 external interrupts sources */
+
+#define PIC32_INT_PRI(pri, subpri) \
+ (((pri & PRI_MASK) << 2) | (subpri & SUBPRI_MASK))
+#define DEFAULT_PIC32_INT_PRI PIC32_INT_PRI(2, 0)
+
+static struct irq_domain *evic_irq_domain;
+static struct evic __iomem *evic_base;
+
+static unsigned int *evic_irq_prio;
+
+struct pic_reg {
+ u32 val; /* value register*/
+ u32 clr; /* clear register */
+ u32 set; /* set register */
+ u32 inv; /* inv register */
+} __packed;
+
+struct evic {
+ struct pic_reg intcon;
+ struct pic_reg priss;
+ struct pic_reg intstat;
+ struct pic_reg iptmr;
+ struct pic_reg ifs[6];
+ u32 reserved1[8];
+ struct pic_reg iec[6];
+ u32 reserved2[8];
+ struct pic_reg ipc[48];
+ u32 reserved3[64];
+ u32 off[191];
+} __packed;
+
+static int get_ext_irq_index(irq_hw_number_t hw);
+static void evic_set_ext_irq_polarity(int ext_irq, u32 type);
+
+#define BIT_REG_MASK(bit, reg, mask) \
+ do { \
+ reg = bit/32; \
+ mask = 1 << (bit % 32); \
+ } while (0)
+
+asmlinkage void __weak plat_irq_dispatch(void)
+{
+ unsigned int irq, hwirq;
+ u32 reg, mask;
+
+ hwirq = readl(&evic_base->intstat.val) & 0xFF;
+
+ /* Check if the interrupt was really triggered by hardware*/
+ BIT_REG_MASK(hwirq, reg, mask);
+ if (likely(readl(&evic_base->ifs[reg].val) &
+ readl(&evic_base->iec[reg].val) & mask)) {
+ irq = irq_linear_revmap(evic_irq_domain, hwirq);
+ do_IRQ(irq);
+ } else
+ spurious_interrupt();
+}
+
+/* mask off an interrupt */
+static inline void mask_pic32_irq(struct irq_data *irqd)
+{
+ u32 reg, mask;
+ unsigned int hwirq = irqd_to_hwirq(irqd);
+
+ BIT_REG_MASK(hwirq, reg, mask);
+ writel(mask, &evic_base->iec[reg].clr);
+}
+
+/* unmask an interrupt */
+static inline void unmask_pic32_irq(struct irq_data *irqd)
+{
+ u32 reg, mask;
+ unsigned int hwirq = irqd_to_hwirq(irqd);
+
+ BIT_REG_MASK(hwirq, reg, mask);
+ writel(mask, &evic_base->iec[reg].set);
+}
+
+/* acknowledge an interrupt */
+static void ack_pic32_irq(struct irq_data *irqd)
+{
+ u32 reg, mask;
+ unsigned int hwirq = irqd_to_hwirq(irqd);
+
+ BIT_REG_MASK(hwirq, reg, mask);
+ writel(mask, &evic_base->ifs[reg].clr);
+}
+
+static int set_type_pic32_irq(struct irq_data *data, unsigned int flow_type)
+{
+ int index;
+
+ switch (flow_type) {
+
+ case IRQ_TYPE_EDGE_RISING:
+ case IRQ_TYPE_EDGE_FALLING:
+ irq_set_handler_locked(data, handle_edge_irq);
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ case IRQ_TYPE_LEVEL_LOW:
+ irq_set_handler_locked(data, handle_fasteoi_irq);
+ break;
+
+ default:
+ pr_err("Invalid interrupt type !\n");
+ return -EINVAL;
+ }
+
+ /* set polarity for external interrupts only */
+ index = get_ext_irq_index(data->hwirq);
+ if (index >= 0)
+ evic_set_ext_irq_polarity(index, flow_type);
+
+ return IRQ_SET_MASK_OK;
+}
+
+static void pic32_bind_evic_interrupt(int irq, int set)
+{
+ writel(set, &evic_base->off[irq]);
+}
+
+int pic32_get_c0_compare_int(void)
+{
+ int virq;
+
+ virq = irq_create_mapping(evic_irq_domain, CORE_TIMER_INTERRUPT);
+ irq_set_irq_type(virq, IRQ_TYPE_EDGE_RISING);
+ return virq;
+}
+
+static struct irq_chip pic32_irq_chip = {
+ .name = "PIC32-EVIC",
+ .irq_ack = ack_pic32_irq,
+ .irq_mask = mask_pic32_irq,
+ .irq_unmask = unmask_pic32_irq,
+ .irq_eoi = ack_pic32_irq,
+ .irq_set_type = set_type_pic32_irq,
+};
+
+static void evic_set_irq_priority(int irq, int priority)
+{
+ u32 reg, shift;
+
+ reg = irq / 4;
+ shift = (irq % 4) * 8;
+
+ /* set priority */
+ writel(INT_MASK << shift, &evic_base->ipc[reg].clr);
+ writel(priority << shift, &evic_base->ipc[reg].set);
+}
+
+static void evic_set_ext_irq_polarity(int ext_irq, u32 type)
+{
+ if (WARN_ON(ext_irq >= NR_EXT_IRQS))
+ return;
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ writel(1 << ext_irq, &evic_base->intcon.set);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ writel(1 << ext_irq, &evic_base->intcon.clr);
+ break;
+ default:
+ pr_err("Invalid external interrupt polarity !\n");
+ }
+}
+
+static int get_ext_irq_index(irq_hw_number_t hw)
+{
+ switch (hw) {
+ case EXTERNAL_INTERRUPT_0:
+ return 0;
+ case EXTERNAL_INTERRUPT_1:
+ return 1;
+ case EXTERNAL_INTERRUPT_2:
+ return 2;
+ case EXTERNAL_INTERRUPT_3:
+ return 3;
+ case EXTERNAL_INTERRUPT_4:
+ return 4;
+ default:
+ return -1;
+ }
+}
+
+static int evic_intc_map(struct irq_domain *irqd, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ u32 reg, mask;
+
+ irq_set_chip(virq, &pic32_irq_chip);
+
+ BIT_REG_MASK(hw, reg, mask);
+
+ /* disable */
+ writel(mask, &evic_base->iec[reg].clr);
+
+ /* clear flag */
+ writel(mask, &evic_base->ifs[reg].clr);
+
+ evic_set_irq_priority(hw, evic_irq_prio[hw]);
+
+ return 0;
+}
+
+static int evic_irq_domain_xlate(struct irq_domain *d,
+ struct device_node *ctrlr,
+ const u32 *intspec,
+ unsigned int intsize,
+ irq_hw_number_t *out_hwirq,
+ unsigned int *out_type)
+{
+ /* Check for number of params */
+ if (WARN_ON(intsize < 2))
+ return -EINVAL;
+ if (WARN_ON(intspec[0] >= NR_IRQS))
+ return -EINVAL;
+
+ *out_hwirq = intspec[0];
+
+ evic_irq_prio[*out_hwirq] = DEFAULT_PIC32_INT_PRI;
+
+ *out_type = intspec[1];
+
+ return 0;
+}
+
+static const struct irq_domain_ops evic_intc_irq_domain_ops = {
+ .map = evic_intc_map,
+ .xlate = evic_irq_domain_xlate,
+};
+
+#ifdef CONFIG_OF
+static int __init
+microchip_evic_of_init(struct device_node *node, struct device_node *parent)
+{
+ struct resource res;
+
+ if (WARN_ON(!node))
+ return -ENODEV;
+
+ evic_irq_prio = kcalloc(NR_IRQS, sizeof(*evic_irq_prio),
+ GFP_KERNEL);
+ if (!evic_irq_prio)
+ return -ENOMEM;
+
+ evic_irq_prio[CORE_TIMER_INTERRUPT] = DEFAULT_PIC32_INT_PRI;
+
+ if (of_address_to_resource(node, 0, &res))
+ panic("Failed to get evic memory range");
+
+ if (request_mem_region(res.start, resource_size(&res),
+ res.name) == NULL)
+ panic("Failed to request evic memory");
+
+ evic_base = ioremap_nocache(res.start, resource_size(&res));
+ if (!evic_base)
+ panic("Failed to remap evic memory");
+
+ board_bind_eic_interrupt = &pic32_bind_evic_interrupt;
+
+ evic_irq_domain = irq_domain_add_linear(node, NR_IRQS,
+ &evic_intc_irq_domain_ops, NULL);
+ if (!evic_irq_domain)
+ panic("Failed to add linear irqdomain for EVIC");
+
+ irq_set_default_host(evic_irq_domain);
+
+ return 0;
+}
+
+IRQCHIP_DECLARE(microchip_evic, "microchip,pic32mzda-evic",
+ microchip_evic_of_init);
+#endif
diff --git a/include/linux/irqchip/pic32-evic.h b/include/linux/irqchip/pic32-evic.h
new file mode 100644
index 0000000..c514bae
--- /dev/null
+++ b/include/linux/irqchip/pic32-evic.h
@@ -0,0 +1,19 @@
+/*
+ * Joshua Henderson, <joshua.henderson@xxxxxxxxxxxxx>
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef __LINUX_IRQCHIP_PIC32_EVIC_H
+#define __LINUX_IRQCHIP_PIC32_EVIC_H
+
+extern int pic32_get_c0_compare_int(void);
+
+#endif /* __LINUX_IRQCHIP_PIC32_EVIC_H */
--
1.7.9.5
