Re: [PATCH v11 3/3] MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Harvey + Ralf,

On Thu, Jan 07, 2016 at 09:40:13AM +0000, Harvey Hunt wrote:
> On 07/01/16 01:29, Brian Norris wrote:
> >On Mon, Jan 04, 2016 at 12:34:44PM +0000, Harvey Hunt wrote:
> >>diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
> >>index 9fcb9e7..782258c 100644
> >>--- a/arch/mips/boot/dts/ingenic/ci20.dts
> >>+++ b/arch/mips/boot/dts/ingenic/ci20.dts
> >
> >As I noted on patch 1, you need to send this to linux-mips + Ralf.
> 
> I forgot to CC Ralf on this version, but he took v9 (no change
> between v9 and v11) through linux-mips as can be seen here:
> http://patchwork.linux-mips.org/patch/11695/

OK.

> >>@@ -42,3 +42,66 @@
> >>  &uart4 {
> >>  	status = "okay";
> >>  };
> >>+
> >>+&nemc {
> >>+	status = "okay";
> >>+
> >>+	nandc: nand-controller@1 {
> >>+		compatible = "ingenic,jz4780-nand";
> >>+		reg = <1 0 0x1000000>;
> >>+
> >>+		#address-cells = <1>;
> >>+		#size-cells = <0>;
> >>+
> >>+		ingenic,bch-controller = <&bch>;
> >>+
> >>+		ingenic,nemc-tAS = <10>;
> >>+		ingenic,nemc-tAH = <5>;
> >>+		ingenic,nemc-tBP = <10>;
> >>+		ingenic,nemc-tAW = <15>;
> >>+		ingenic,nemc-tSTRV = <100>;
> >>+
> >>+		nand@1 {
> >>+			reg = <1>;
> >>+
> >>+			nand-ecc-step-size = <1024>;
> >>+			nand-ecc-strength = <24>;
> >>+			nand-ecc-mode = "hw";
> >>+			nand-on-flash-bbt;
> >>+
> >>+			partitions {
> >>+				#address-cells = <2>;
> >>+				#size-cells = <2>;
> >
> >This binding was updated, so you need:
> >
> >				compatible = "fixed-partitions";
> 
> This has been fixed in mips-linux here:
> http://patchwork.linux-mips.org/patch/11914/

Ralf: it looks like you applied the DTS changes twice, essentially.
Might want to fix that:

[From arch/mips/boot/dts/ingenic/ci20.dts]
...
&nemc {
	...
	nandc: nand-controller@1 {
		...
		nand@1 {
			...
			partitions {
				compatible = "fixed-partitions";
				...
			};
		};
	};
};

&bch {
	status = "okay";
};

&nemc {
	...
	nandc: nand-controller@1 {
		...
		nand@1 {
			...
			partitions {
				...
			};
		};
	};
};

&bch {
	status = "okay";
};


Brian




[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux