Add support for SoCs from the mt7621 family. These all have 2 GMAC ports,
both of which are attached to the same internal 1000MBit switch. Currently
we only support GMAC1 as the sole CPU port.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx>
Signed-off-by: Michael Lee <igvtee@xxxxxxxxx>
---
drivers/net/ethernet/mediatek/soc_mt7621.c | 162 ++++++++++++++++++++++++++++
1 file changed, 162 insertions(+)
create mode 100644 drivers/net/ethernet/mediatek/soc_mt7621.c
diff --git a/drivers/net/ethernet/mediatek/soc_mt7621.c b/drivers/net/ethernet/mediatek/soc_mt7621.c
new file mode 100644
index 0000000..4f4141c
--- /dev/null
+++ b/drivers/net/ethernet/mediatek/soc_mt7621.c
@@ -0,0 +1,162 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic@xxxxxxxxxxx>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@xxxxxxxxxxx>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee@xxxxxxxxx>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/if_vlan.h>
+#include <linux/of_net.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+#include "gsw_mt7620.h"
+#include "mt7530.h"
+#include "mdio.h"
+
+#define MT7620A_CDMA_CSG_CFG 0x400
+#define MT7621_CDMP_IG_CTRL (MT7620A_CDMA_CSG_CFG + 0x00)
+#define MT7621_CDMP_EG_CTRL (MT7620A_CDMA_CSG_CFG + 0x04)
+#define MT7621_RESET_FE BIT(6)
+#define MT7621_L4_VALID BIT(24)
+
+#define MT7621_TX_DMA_UDF BIT(19)
+#define MT7621_TX_DMA_FPORT BIT(25)
+
+#define CDMA_ICS_EN BIT(2)
+#define CDMA_UCS_EN BIT(1)
+#define CDMA_TCS_EN BIT(0)
+
+#define GDMA_ICS_EN BIT(22)
+#define GDMA_TCS_EN BIT(21)
+#define GDMA_UCS_EN BIT(20)
+
+/* frame engine counters */
+#define MT7621_REG_MIB_OFFSET 0x2000
+#define MT7621_PPE_AC_BCNT0 (MT7621_REG_MIB_OFFSET + 0x00)
+#define MT7621_GDM1_TX_GBCNT (MT7621_REG_MIB_OFFSET + 0x400)
+#define MT7621_GDM2_TX_GBCNT (MT7621_GDM1_TX_GBCNT + 0x40)
+
+#define GSW_REG_GDMA1_MAC_ADRL 0x508
+#define GSW_REG_GDMA1_MAC_ADRH 0x50C
+
+#define MT7621_FE_RST_GL (FE_FE_OFFSET + 0x04)
+#define MT7620_FE_INT_STATUS2 (FE_FE_OFFSET + 0x08)
+
+/* FE_INT_STATUS reg on mt7620 define CNT_GDM1_AF at BIT(29)
+ * but after test it should be BIT(13).
+ */
+#define MT7621_FE_GDM1_AF BIT(28)
+#define MT7621_FE_GDM2_AF BIT(29)
+
+static const u16 mt7621_reg_table[FE_REG_COUNT] = {
+ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
+ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
+ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
+ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0,
+ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0,
+ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0,
+ [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0,
+ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0,
+ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0,
+ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0,
+ [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0,
+ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE,
+ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS,
+ [FE_REG_FE_DMA_VID_BASE] = 0,
+ [FE_REG_FE_COUNTER_BASE] = MT7621_GDM1_TX_GBCNT,
+ [FE_REG_FE_RST_GL] = MT7621_FE_RST_GL,
+ [FE_REG_FE_INT_STATUS2] = MT7620_FE_INT_STATUS2,
+};
+
+static int mt7621_gsw_config(struct fe_priv *priv)
+{
+ if (priv->mii_bus && priv->mii_bus->phy_map[0x1f])
+ mt7530_probe(priv->device, NULL, priv->mii_bus, 1);
+
+ return 0;
+}
+
+static void mt7621_fe_reset(void)
+{
+ fe_reset(MT7621_RESET_FE);
+}
+
+static int mt7621_fwd_config(struct fe_priv *priv)
+{
+ /* Setup GMAC1 only, there is no support for GMAC2 yet */
+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~0xffff,
+ MT7620A_GDMA1_FWD_CFG);
+
+ /* Enable RX checksum */
+ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) | (GDMA_ICS_EN |
+ GDMA_TCS_EN | GDMA_UCS_EN),
+ MT7620A_GDMA1_FWD_CFG);
+ /* Enable RX VLan Offloading */
+ fe_w32(1, MT7621_CDMP_EG_CTRL);
+
+ return 0;
+}
+
+static void mt7621_init_data(struct fe_soc_data *data,
+ struct net_device *netdev)
+{
+ struct fe_priv *priv = netdev_priv(netdev);
+
+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_RX_2B_OFFSET |
+ FE_FLAG_RX_SG_DMA | FE_FLAG_NAPI_WEIGHT |
+ FE_FLAG_HAS_SWITCH;
+
+ netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_IPV6_CSUM;
+}
+
+static void mt7621_set_mac(struct fe_priv *priv, unsigned char *mac)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->page_lock, flags);
+ fe_w32((mac[0] << 8) | mac[1], GSW_REG_GDMA1_MAC_ADRH);
+ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5],
+ GSW_REG_GDMA1_MAC_ADRL);
+ spin_unlock_irqrestore(&priv->page_lock, flags);
+}
+
+static struct fe_soc_data mt7621_data = {
+ .dma_type = FE_PDMA_RX_QDMA_TX,
+ .txd4 = MT7621_TX_DMA_FPORT,
+ .init_data = mt7621_init_data,
+ .reset_fe = mt7621_fe_reset,
+ .set_mac = mt7621_set_mac,
+ .fwd_config = mt7621_fwd_config,
+ .switch_init = mtk_gsw_init,
+ .switch_config = mt7621_gsw_config,
+ .reg_table = mt7621_reg_table,
+ .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS,
+ .rx_int = RT5350_RX_DONE_INT,
+ .tx_int = RT5350_TX_DONE_INT,
+ .status_int = (MT7621_FE_GDM1_AF | MT7621_FE_GDM2_AF),
+ .checksum_bit = MT7621_L4_VALID,
+ .has_carrier = mt7620_has_carrier,
+ .mdio_read = mt7620_mdio_read,
+ .mdio_write = mt7620_mdio_write,
+ .mdio_adjust_link = mt7620_mdio_link_adjust,
+};
+
+const struct of_device_id of_fe_match[] = {
+ { .compatible = "mediatek,mt7621-eth", .data = &mt7621_data },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
--
1.7.10.4
