This driver is very basic and only provides basic init and irq support.
The SoC and switch core both have support for a special tag making DSA
support possible.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
---
drivers/net/ethernet/mediatek/esw_rt3050.c | 621 ++++++++++++++++++++++++++++
drivers/net/ethernet/mediatek/esw_rt3050.h | 29 ++
2 files changed, 650 insertions(+)
create mode 100644 drivers/net/ethernet/mediatek/esw_rt3050.c
create mode 100644 drivers/net/ethernet/mediatek/esw_rt3050.h
diff --git a/drivers/net/ethernet/mediatek/esw_rt3050.c b/drivers/net/ethernet/mediatek/esw_rt3050.c
new file mode 100644
index 0000000..6811340
--- /dev/null
+++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
@@ -0,0 +1,621 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic@xxxxxxxxxxx>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@xxxxxxxxxxx>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee@xxxxxxxxx>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <linux/of_irq.h>
+
+#include "mtk_eth_soc.h"
+
+/* HW limitations for this switch:
+ * - No large frame support (PKT_MAX_LEN at most 1536)
+ * - Can't have untagged vlan and tagged vlan on one port at the same time,
+ * though this might be possible using the undocumented PPE.
+ */
+
+#define RT305X_ESW_REG_ISR 0x00
+#define RT305X_ESW_REG_IMR 0x04
+#define RT305X_ESW_REG_FCT0 0x08
+#define RT305X_ESW_REG_PFC1 0x14
+#define RT305X_ESW_REG_ATS 0x24
+#define RT305X_ESW_REG_ATS0 0x28
+#define RT305X_ESW_REG_ATS1 0x2c
+#define RT305X_ESW_REG_ATS2 0x30
+#define RT305X_ESW_REG_PVIDC(_n) (0x40 + 4 * (_n))
+#define RT305X_ESW_REG_VLANI(_n) (0x50 + 4 * (_n))
+#define RT305X_ESW_REG_VMSC(_n) (0x70 + 4 * (_n))
+#define RT305X_ESW_REG_POA 0x80
+#define RT305X_ESW_REG_FPA 0x84
+#define RT305X_ESW_REG_SOCPC 0x8c
+#define RT305X_ESW_REG_POC0 0x90
+#define RT305X_ESW_REG_POC1 0x94
+#define RT305X_ESW_REG_POC2 0x98
+#define RT305X_ESW_REG_SGC 0x9c
+#define RT305X_ESW_REG_STRT 0xa0
+#define RT305X_ESW_REG_PCR0 0xc0
+#define RT305X_ESW_REG_PCR1 0xc4
+#define RT305X_ESW_REG_FPA2 0xc8
+#define RT305X_ESW_REG_FCT2 0xcc
+#define RT305X_ESW_REG_SGC2 0xe4
+#define RT305X_ESW_REG_P0LED 0xa4
+#define RT305X_ESW_REG_P1LED 0xa8
+#define RT305X_ESW_REG_P2LED 0xac
+#define RT305X_ESW_REG_P3LED 0xb0
+#define RT305X_ESW_REG_P4LED 0xb4
+#define RT305X_ESW_REG_PXPC(_x) (0xe8 + (4 * _x))
+#define RT305X_ESW_REG_P1PC 0xec
+#define RT305X_ESW_REG_P2PC 0xf0
+#define RT305X_ESW_REG_P3PC 0xf4
+#define RT305X_ESW_REG_P4PC 0xf8
+#define RT305X_ESW_REG_P5PC 0xfc
+
+#define RT305X_ESW_LED_LINK 0
+#define RT305X_ESW_LED_100M 1
+#define RT305X_ESW_LED_DUPLEX 2
+#define RT305X_ESW_LED_ACTIVITY 3
+#define RT305X_ESW_LED_COLLISION 4
+#define RT305X_ESW_LED_LINKACT 5
+#define RT305X_ESW_LED_DUPLCOLL 6
+#define RT305X_ESW_LED_10MACT 7
+#define RT305X_ESW_LED_100MACT 8
+/* Additional led states not in datasheet: */
+#define RT305X_ESW_LED_BLINK 10
+#define RT305X_ESW_LED_ON 12
+
+#define RT305X_ESW_LINK_S 25
+#define RT305X_ESW_DUPLEX_S 9
+#define RT305X_ESW_SPD_S 0
+
+#define RT305X_ESW_PCR0_WT_NWAY_DATA_S 16
+#define RT305X_ESW_PCR0_WT_PHY_CMD BIT(13)
+#define RT305X_ESW_PCR0_CPU_PHY_REG_S 8
+
+#define RT305X_ESW_PCR1_WT_DONE BIT(0)
+
+#define RT305X_ESW_ATS_TIMEOUT (5 * HZ)
+#define RT305X_ESW_PHY_TIMEOUT (5 * HZ)
+
+#define RT305X_ESW_PVIDC_PVID_M 0xfff
+#define RT305X_ESW_PVIDC_PVID_S 12
+
+#define RT305X_ESW_VLANI_VID_M 0xfff
+#define RT305X_ESW_VLANI_VID_S 12
+
+#define RT305X_ESW_VMSC_MSC_M 0xff
+#define RT305X_ESW_VMSC_MSC_S 8
+
+#define RT305X_ESW_SOCPC_DISUN2CPU_S 0
+#define RT305X_ESW_SOCPC_DISMC2CPU_S 8
+#define RT305X_ESW_SOCPC_DISBC2CPU_S 16
+#define RT305X_ESW_SOCPC_CRC_PADDING BIT(25)
+
+#define RT305X_ESW_POC0_EN_BP_S 0
+#define RT305X_ESW_POC0_EN_FC_S 8
+#define RT305X_ESW_POC0_DIS_RMC2CPU_S 16
+#define RT305X_ESW_POC0_DIS_PORT_M 0x7f
+#define RT305X_ESW_POC0_DIS_PORT_S 23
+
+#define RT305X_ESW_POC2_UNTAG_EN_M 0xff
+#define RT305X_ESW_POC2_UNTAG_EN_S 0
+#define RT305X_ESW_POC2_ENAGING_S 8
+#define RT305X_ESW_POC2_DIS_UC_PAUSE_S 16
+
+#define RT305X_ESW_SGC2_DOUBLE_TAG_M 0x7f
+#define RT305X_ESW_SGC2_DOUBLE_TAG_S 0
+#define RT305X_ESW_SGC2_LAN_PMAP_M 0x3f
+#define RT305X_ESW_SGC2_LAN_PMAP_S 24
+
+#define RT305X_ESW_PFC1_EN_VLAN_M 0xff
+#define RT305X_ESW_PFC1_EN_VLAN_S 16
+#define RT305X_ESW_PFC1_EN_TOS_S 24
+
+#define RT305X_ESW_VLAN_NONE 0xfff
+
+#define RT305X_ESW_GSC_BC_STROM_MASK 0x3
+#define RT305X_ESW_GSC_BC_STROM_SHIFT 4
+
+#define RT305X_ESW_GSC_LED_FREQ_MASK 0x3
+#define RT305X_ESW_GSC_LED_FREQ_SHIFT 23
+
+#define RT305X_ESW_POA_LINK_MASK 0x1f
+#define RT305X_ESW_POA_LINK_SHIFT 25
+
+#define RT305X_ESW_PORT_ST_CHG BIT(26)
+#define RT305X_ESW_PORT0 0
+#define RT305X_ESW_PORT1 1
+#define RT305X_ESW_PORT2 2
+#define RT305X_ESW_PORT3 3
+#define RT305X_ESW_PORT4 4
+#define RT305X_ESW_PORT5 5
+#define RT305X_ESW_PORT6 6
+
+#define RT305X_ESW_PMAP_LLLLLL 0x3f
+#define RT305X_ESW_PMAP_LLLLWL 0x2f
+#define RT305X_ESW_PMAP_WLLLLL 0x3e
+
+#define RT305X_ESW_PORTS_INTERNAL \
+ (BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) | \
+ BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) | \
+ BIT(RT305X_ESW_PORT4))
+
+#define RT305X_ESW_PORTS_NOCPU \
+ (RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5))
+
+#define RT305X_ESW_PORTS_CPU BIT(RT305X_ESW_PORT6)
+
+#define RT305X_ESW_PORTS_ALL \
+ (RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU)
+
+#define RT305X_ESW_NUM_PORTS 7
+#define RT305X_ESW_NUM_LEDS 5
+
+#define RT5350_EWS_REG_LED_POLARITY 0x168
+#define RT5350_RESET_EPHY BIT(24)
+
+struct esw_port {
+ bool disable;
+ u8 led;
+};
+
+struct rt305x_esw {
+ struct device *dev;
+ void __iomem *base;
+ int irq;
+
+ /* Protects against concurrent register r/w operations. */
+ spinlock_t reg_rw_lock;
+
+ unsigned char port_map;
+ unsigned int reg_led_polarity;
+
+ struct esw_port ports[RT305X_ESW_NUM_PORTS];
+
+};
+
+static inline void esw_w32(struct rt305x_esw *esw, u32 val, unsigned reg)
+{
+ __raw_writel(val, esw->base + reg);
+}
+
+static inline u32 esw_r32(struct rt305x_esw *esw, unsigned reg)
+{
+ return __raw_readl(esw->base + reg);
+}
+
+static inline void esw_rmw_raw(struct rt305x_esw *esw, unsigned reg,
+ unsigned long mask, unsigned long val)
+{
+ unsigned long t;
+
+ t = __raw_readl(esw->base + reg) & ~mask;
+ __raw_writel(t | val, esw->base + reg);
+}
+
+static void esw_rmw(struct rt305x_esw *esw, unsigned reg,
+ unsigned long mask, unsigned long val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&esw->reg_rw_lock, flags);
+ esw_rmw_raw(esw, reg, mask, val);
+ spin_unlock_irqrestore(&esw->reg_rw_lock, flags);
+}
+
+static u32 rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr,
+ u32 phy_register, u32 write_data)
+{
+ unsigned long t_start = jiffies;
+ int ret = 0;
+
+ while (1) {
+ if (!(esw_r32(esw, RT305X_ESW_REG_PCR1) &
+ RT305X_ESW_PCR1_WT_DONE))
+ break;
+ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
+ ret = 1;
+ goto out;
+ }
+ }
+
+ write_data &= 0xffff;
+ esw_w32(esw, (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) |
+ (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) |
+ (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD,
+ RT305X_ESW_REG_PCR0);
+
+ t_start = jiffies;
+ while (1) {
+ if (esw_r32(esw, RT305X_ESW_REG_PCR1) &
+ RT305X_ESW_PCR1_WT_DONE)
+ break;
+
+ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) {
+ ret = 1;
+ break;
+ }
+ }
+out:
+ if (ret)
+ dev_err(esw->dev, "ramips_eth: MDIO timeout\n");
+ return ret;
+}
+
+static unsigned esw_get_port_disable(struct rt305x_esw *esw)
+{
+ unsigned reg;
+
+ reg = esw_r32(esw, RT305X_ESW_REG_POC0);
+ return (reg >> RT305X_ESW_POC0_DIS_PORT_S) &
+ RT305X_ESW_POC0_DIS_PORT_M;
+}
+
+static void esw_hw_init(struct rt305x_esw *esw)
+{
+ int i;
+ u8 port_disable = 0;
+ u8 port_map = RT305X_ESW_PMAP_LLLLLL;
+
+ /* vodoo from original driver */
+ esw_w32(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
+ esw_w32(esw, 0x00000000, RT305X_ESW_REG_SGC2);
+ /* Port priority 1 for all ports, vlan enabled. */
+ esw_w32(esw, 0x00005555 |
+ (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
+ RT305X_ESW_REG_PFC1);
+
+ /* Enable Back Pressure, and Flow Control */
+ esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
+ (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
+ RT305X_ESW_REG_POC0);
+
+ /* Enable Aging, and VLAN TAG removal */
+ esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) |
+ (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)),
+ RT305X_ESW_REG_POC2);
+
+ esw_w32(esw, 0x00d6500c, RT305X_ESW_REG_FCT2);
+
+ /* 300s aging timer, max packet len 1536, broadcast storm prevention
+ * disabled, disable collision abort, mac xor48 hash, 10 packet back
+ * pressure jam, GMII disable was_transmit, back pressure disabled,
+ * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all
+ * ports.
+ */
+ esw_w32(esw, 0x0008a301, RT305X_ESW_REG_SGC);
+
+ /* Setup SoC Port control register */
+ esw_w32(esw,
+ (RT305X_ESW_SOCPC_CRC_PADDING |
+ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) |
+ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) |
+ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)),
+ RT305X_ESW_REG_SOCPC);
+
+ /* ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
+ * turbo mii off, rgmi 3.3v off
+ * port5: disabled
+ * port6: enabled, gige, full-duplex, rx/tx-flow-control
+ */
+ esw_w32(esw, 0x3f502b28, RT305X_ESW_REG_FPA2);
+ esw_w32(esw, 0x00000000, RT305X_ESW_REG_FPA);
+
+ /* Force Link/Activity on ports */
+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P0LED);
+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P1LED);
+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P2LED);
+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED);
+ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED);
+
+ /* Copy disabled port configuration from bootloader setup */
+ port_disable = esw_get_port_disable(esw);
+ for (i = 0; i < 6; i++)
+ esw->ports[i].disable = (port_disable & (1 << i)) != 0;
+
+ if (ralink_soc == RT305X_SOC_RT3352) {
+ /* reset EPHY */
+ fe_reset(RT5350_RESET_EPHY);
+
+ rt305x_mii_write(esw, 0, 31, 0x8000);
+ for (i = 0; i < 5; i++) {
+ if (esw->ports[i].disable) {
+ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+ } else {
+ rt305x_mii_write(esw, i, MII_BMCR,
+ BMCR_FULLDPLX |
+ BMCR_ANENABLE |
+ BMCR_SPEED100);
+ }
+ /* TX10 waveform coefficient LSB=0 disable PHY */
+ rt305x_mii_write(esw, i, 26, 0x1601);
+ /* TX100/TX10 AD/DA current bias */
+ rt305x_mii_write(esw, i, 29, 0x7016);
+ /* TX100 slew rate control */
+ rt305x_mii_write(esw, i, 30, 0x0038);
+ }
+
+ /* select global register */
+ rt305x_mii_write(esw, 0, 31, 0x0);
+ /* enlarge agcsel threshold 3 and threshold 2 */
+ rt305x_mii_write(esw, 0, 1, 0x4a40);
+ /* enlarge agcsel threshold 5 and threshold 4 */
+ rt305x_mii_write(esw, 0, 2, 0x6254);
+ /* enlarge agcsel threshold */
+ rt305x_mii_write(esw, 0, 3, 0xa17f);
+ rt305x_mii_write(esw, 0, 12, 0x7eaa);
+ /* longer TP_IDL tail length */
+ rt305x_mii_write(esw, 0, 14, 0x65);
+ /* increased squelch pulse count threshold. */
+ rt305x_mii_write(esw, 0, 16, 0x0684);
+ /* set TX10 signal amplitude threshold to minimum */
+ rt305x_mii_write(esw, 0, 17, 0x0fe0);
+ /* set squelch amplitude to higher threshold */
+ rt305x_mii_write(esw, 0, 18, 0x40ba);
+ /* tune TP_IDL tail and head waveform, enable power
+ * down slew rate control
+ */
+ rt305x_mii_write(esw, 0, 22, 0x253f);
+ /* set PLL/Receive bias current are calibrated */
+ rt305x_mii_write(esw, 0, 27, 0x2fda);
+ /* change PLL/Receive bias current to internal(RT3350) */
+ rt305x_mii_write(esw, 0, 28, 0xc410);
+ /* change PLL bias current to internal(RT3052_MP3) */
+ rt305x_mii_write(esw, 0, 29, 0x598b);
+ /* select local register */
+ rt305x_mii_write(esw, 0, 31, 0x8000);
+ } else if (ralink_soc == RT305X_SOC_RT5350) {
+ /* reset EPHY */
+ fe_reset(RT5350_RESET_EPHY);
+
+ /* set the led polarity */
+ esw_w32(esw, esw->reg_led_polarity & 0x1F,
+ RT5350_EWS_REG_LED_POLARITY);
+
+ /* local registers */
+ rt305x_mii_write(esw, 0, 31, 0x8000);
+ for (i = 0; i < 5; i++) {
+ if (esw->ports[i].disable) {
+ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+ } else {
+ rt305x_mii_write(esw, i, MII_BMCR,
+ BMCR_FULLDPLX |
+ BMCR_ANENABLE |
+ BMCR_SPEED100);
+ }
+ /* TX10 waveform coefficient LSB=0 disable PHY */
+ rt305x_mii_write(esw, i, 26, 0x1601);
+ /* TX100/TX10 AD/DA current bias */
+ rt305x_mii_write(esw, i, 29, 0x7015);
+ /* TX100 slew rate control */
+ rt305x_mii_write(esw, i, 30, 0x0038);
+ }
+
+ /* global registers */
+ rt305x_mii_write(esw, 0, 31, 0x0);
+ /* enlarge agcsel threshold 3 and threshold 2 */
+ rt305x_mii_write(esw, 0, 1, 0x4a40);
+ /* enlarge agcsel threshold 5 and threshold 4 */
+ rt305x_mii_write(esw, 0, 2, 0x6254);
+ /* enlarge agcsel threshold 6 */
+ rt305x_mii_write(esw, 0, 3, 0xa17f);
+ rt305x_mii_write(esw, 0, 12, 0x7eaa);
+ /* longer TP_IDL tail length */
+ rt305x_mii_write(esw, 0, 14, 0x65);
+ /* increased squelch pulse count threshold. */
+ rt305x_mii_write(esw, 0, 16, 0x0684);
+ /* set TX10 signal amplitude threshold to minimum */
+ rt305x_mii_write(esw, 0, 17, 0x0fe0);
+ /* set squelch amplitude to higher threshold */
+ rt305x_mii_write(esw, 0, 18, 0x40ba);
+ /* tune TP_IDL tail and head waveform, enable power
+ * down slew rate control
+ */
+ rt305x_mii_write(esw, 0, 22, 0x253f);
+ /* set PLL/Receive bias current are calibrated */
+ rt305x_mii_write(esw, 0, 27, 0x2fda);
+ /* change PLL/Receive bias current to internal(RT3350) */
+ rt305x_mii_write(esw, 0, 28, 0xc410);
+ /* change PLL bias current to internal(RT3052_MP3) */
+ rt305x_mii_write(esw, 0, 29, 0x598b);
+ /* select local register */
+ rt305x_mii_write(esw, 0, 31, 0x8000);
+ } else if (ralink_soc == MT762X_SOC_MT7628AN ||
+ ralink_soc == MT762X_SOC_MT7688) {
+ int i;
+
+ /* reset EPHY */
+ fe_reset(RT5350_RESET_EPHY);
+
+ rt305x_mii_write(esw, 0, 31, 0x2000); /* change G2 page */
+ rt305x_mii_write(esw, 0, 26, 0x0020);
+
+ for (i = 0; i < 5; i++) {
+ rt305x_mii_write(esw, i, 31, 0x8000);
+ rt305x_mii_write(esw, i, 0, 0x3100);
+ rt305x_mii_write(esw, i, 30, 0xa000);
+ rt305x_mii_write(esw, i, 31, 0xa000);
+ rt305x_mii_write(esw, i, 16, 0x0606);
+ rt305x_mii_write(esw, i, 23, 0x0f0e);
+ rt305x_mii_write(esw, i, 24, 0x1610);
+ rt305x_mii_write(esw, i, 30, 0x1f15);
+ rt305x_mii_write(esw, i, 28, 0x6111);
+ rt305x_mii_write(esw, i, 31, 0x2000);
+ rt305x_mii_write(esw, i, 26, 0x0000);
+ }
+
+ /* 100Base AOI setting */
+ rt305x_mii_write(esw, 0, 31, 0x5000);
+ rt305x_mii_write(esw, 0, 19, 0x004a);
+ rt305x_mii_write(esw, 0, 20, 0x015a);
+ rt305x_mii_write(esw, 0, 21, 0x00ee);
+ rt305x_mii_write(esw, 0, 22, 0x0033);
+ rt305x_mii_write(esw, 0, 23, 0x020a);
+ rt305x_mii_write(esw, 0, 24, 0x0000);
+ rt305x_mii_write(esw, 0, 25, 0x024a);
+ rt305x_mii_write(esw, 0, 26, 0x035a);
+ rt305x_mii_write(esw, 0, 27, 0x02ee);
+ rt305x_mii_write(esw, 0, 28, 0x0233);
+ rt305x_mii_write(esw, 0, 29, 0x000a);
+ rt305x_mii_write(esw, 0, 30, 0x0000);
+ } else {
+ rt305x_mii_write(esw, 0, 31, 0x8000);
+ for (i = 0; i < 5; i++) {
+ if (esw->ports[i].disable) {
+ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN);
+ } else {
+ rt305x_mii_write(esw, i, MII_BMCR,
+ BMCR_FULLDPLX |
+ BMCR_ANENABLE |
+ BMCR_SPEED100);
+ }
+ /* TX10 waveform coefficient */
+ rt305x_mii_write(esw, i, 26, 0x1601);
+ /* TX100/TX10 AD/DA current bias */
+ rt305x_mii_write(esw, i, 29, 0x7058);
+ /* TX100 slew rate control */
+ rt305x_mii_write(esw, i, 30, 0x0018);
+ }
+
+ /* PHY IOT */
+ /* select global register */
+ rt305x_mii_write(esw, 0, 31, 0x0);
+ /* tune TP_IDL tail and head waveform */
+ rt305x_mii_write(esw, 0, 22, 0x052f);
+ /* set TX10 signal amplitude threshold to minimum */
+ rt305x_mii_write(esw, 0, 17, 0x0fe0);
+ /* set squelch amplitude to higher threshold */
+ rt305x_mii_write(esw, 0, 18, 0x40ba);
+ /* longer TP_IDL tail length */
+ rt305x_mii_write(esw, 0, 14, 0x65);
+ /* select local register */
+ rt305x_mii_write(esw, 0, 31, 0x8000);
+ }
+
+ if (esw->port_map)
+ port_map = esw->port_map;
+ else
+ port_map = RT305X_ESW_PMAP_LLLLLL;
+
+ /* Unused HW feature, but still nice to be consistent here...
+ * This is also exported to userspace ('lan' attribute) so it's
+ * conveniently usable to decide which ports go into the wan vlan by
+ * default.
+ */
+ esw_rmw(esw, RT305X_ESW_REG_SGC2,
+ RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S,
+ port_map << RT305X_ESW_SGC2_LAN_PMAP_S);
+
+ /* make the switch leds blink */
+ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++)
+ esw->ports[i].led = 0x05;
+
+ /* Only unmask the port change interrupt */
+ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
+}
+
+static irqreturn_t esw_interrupt(int irq, void *_esw)
+{
+ struct rt305x_esw *esw = (struct rt305x_esw *)_esw;
+ u32 status;
+
+ status = esw_r32(esw, RT305X_ESW_REG_ISR);
+ if (status & RT305X_ESW_PORT_ST_CHG) {
+ u32 link = esw_r32(esw, RT305X_ESW_REG_POA);
+
+ link >>= RT305X_ESW_POA_LINK_SHIFT;
+ link &= RT305X_ESW_POA_LINK_MASK;
+ dev_info(esw->dev, "link changed 0x%02X\n", link);
+ }
+ esw_w32(esw, status, RT305X_ESW_REG_ISR);
+
+ return IRQ_HANDLED;
+}
+
+static int esw_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct device_node *np = pdev->dev.of_node;
+ const __be32 *port_map, *reg_init;
+ struct rt305x_esw *esw;
+ int ret;
+
+ esw = devm_kzalloc(&pdev->dev, sizeof(*esw), GFP_KERNEL);
+ if (!esw)
+ return -ENOMEM;
+
+ esw->dev = &pdev->dev;
+ esw->irq = irq_of_parse_and_map(np, 0);
+ esw->base = devm_ioremap_resource(&pdev->dev, res);
+ if (!esw->base)
+ return -EADDRNOTAVAIL;
+
+ port_map = of_get_property(np, "mediatek,portmap", NULL);
+ if (port_map)
+ esw->port_map = be32_to_cpu(*port_map);
+
+ reg_init = of_get_property(np, "mediatek,led_polarity", NULL);
+ if (reg_init)
+ esw->reg_led_polarity = be32_to_cpu(*reg_init);
+
+ platform_set_drvdata(pdev, esw);
+
+ spin_lock_init(&esw->reg_rw_lock);
+
+ esw_hw_init(esw);
+
+ ret = devm_request_irq(&pdev->dev, esw->irq, esw_interrupt, 0, "esw",
+ esw);
+
+ if (!ret) {
+ esw_w32(esw, RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_ISR);
+ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR);
+ }
+
+ return ret;
+}
+
+static int esw_remove(struct platform_device *pdev)
+{
+ struct rt305x_esw *esw = platform_get_drvdata(pdev);
+
+ if (esw) {
+ esw_w32(esw, ~0, RT305X_ESW_REG_IMR);
+ platform_set_drvdata(pdev, NULL);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id ralink_esw_match[] = {
+ { .compatible = "ralink,rt3050-esw" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ralink_esw_match);
+
+static struct platform_driver esw_driver = {
+ .probe = esw_probe,
+ .remove = esw_remove,
+ .driver = {
+ .name = "rt3050-esw",
+ .owner = THIS_MODULE,
+ .of_match_table = ralink_esw_match,
+ },
+};
+
+module_platform_driver(esw_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Switch driver for RT305X SoC");
diff --git a/drivers/net/ethernet/mediatek/esw_rt3050.h b/drivers/net/ethernet/mediatek/esw_rt3050.h
new file mode 100644
index 0000000..455107a
--- /dev/null
+++ b/drivers/net/ethernet/mediatek/esw_rt3050.h
@@ -0,0 +1,29 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic@xxxxxxxxxxx>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@xxxxxxxxxxx>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee@xxxxxxxxx>
+ */
+
+#ifndef _RALINK_ESW_RT3052_H__
+#define _RALINK_ESW_RT3052_H__
+
+#ifdef CONFIG_NET_MEDIATEK_ESW_RT3052
+
+int __init mtk_switch_init(void);
+void mtk_switch_exit(void);
+
+#else
+
+static inline int __init mtk_switch_init(void) { return 0; }
+static inline void mtk_switch_exit(void) { }
+
+#endif
+#endif
--
1.7.10.4
