Hello.
On 12/11/2015 12:28 AM, Simon Arlott wrote:
Add device tree binding for the BCM6345 soft reset controller.
The BCM6345 contains a soft-reset controller activated by setting
a bit (that must previously have been cleared).
Signed-off-by: Simon Arlott <simon@xxxxxxxxxxx>
---
v3: Resend. Example has changed because usbh now has two compatible
strings and uses a power domain instead of a regulator.
v2: Renamed to bcm6345, removed "mask" property.
Acked-by: Rob Herring <robh@xxxxxxxxxx>
.../bindings/reset/brcm,bcm6345-reset.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt
new file mode 100644
index 0000000..0313040
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt
@@ -0,0 +1,33 @@
+Broadcom BCM6345 reset controller
+
+The BCM6345 contains a basic soft reset controller in the perf register
+set which resets components using a bit in a register.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "brcm,bcm<soc>-reset", "brcm,bcm6345-reset"
+- regmap: The register map phandle
+- offset: Offset in the register map for the reset register (in bytes)
+- #reset-cells: Must be set to 1
+
+Example:
+
+periph_soft_rst: reset-controller {
+ compatible = "brcm,bcm63168-reset", "brcm,bcm6345-reset";
+ regmap = <&periph_cntl>;
+ offset = <0x10>;
+
+ #reset-cells = <1>;
+};
+
+usbh: usbphy@10002700 {
"usb-phy" please to be more in line with ePAPR standardized "ethernet-phy"
node name.
[...]
MBR, Sergei
